Sorry, Is or or isnt working?Fenderman says that it is, but hardware acceleration isn't available.
Edit: Just tried it here with a test cam, and that is indeed the case.
H265 worked, I let it run for 5 minutes, so that's as conclusive as I have.Sorry, Is or or isnt working?
Does yours record? Mine wont, is there a setting im missing?H265 worked, I let it run for 5 minutes, so that's as conclusive as I have.
But, hardware acceleration cannot be enabled.
make sure you are using h.265 not h.265+Does yours record? Mine wont, is there a setting im missing?
Is yours working on when triggered? Or just continuous?make sure you are using h.265 not h.265+
I just get a still picture using h.265 , guess my pc cant handle it?make sure you are using h.265 not h.265+
Smart codec is a setting in the camera.4.7.5.3w32
Windows 7
Where is smart codec, on dahua camera settings?
Alert clip is stating a length time and size but calling it a snapshot when trying to play it..
Smart codec is off .. what settings in bi have you changed to get it working? I will try to delete one and start over with it.. thanksSmart codec is a setting in the camera.
Double check your camera setup settings in BI.
Or delete the cam and start over in BI.
Only setting I changed, was in the camera, to change from H264H to H265.Smart codec is off .. what settings in bi have you changed to get it working? I will try to delete one and start over with it.. thanks
Screen shot of your Record tab would help.
No.. i have a nvr continuously recording as a back up..Are you not wanting it to continuously record?
All dahuas i have not getting video just snapshots in h.265What camera model are you having the issue with?