fenderman
Staff member
- Mar 9, 2014
- 36,892
- 21,408
no idea...switch is always a good idea its 20 bux...a managed poe switch even better..
Dahua SD59225U-HNI
- Thread starter Cameraguy
- Start date
- Feb 15, 2017
- 1,502
- 1,159
- Feb 15, 2017
- 1,502
- 1,159
Hey.. so blue iris is recording nice.. when i view from pc its perfect..all clips play fine.. problem is this live view is choppy at times from phone even though im just on home network., especially when auto tracking kicks in.. really starting to think its my router..what do you think
looney2ns
IPCT Contributor
Only way to find out is to add the switch.
Plug all security cams into the switch. Plug BI server into same switch.
Run one network cable from same switch to a port on the router.
You can also adjust the bandwidth used within the BI mobile app.
Plug all security cams into the switch. Plug BI server into same switch.
Run one network cable from same switch to a port on the router.
You can also adjust the bandwidth used within the BI mobile app.
- Feb 15, 2017
- 1,502
- 1,159
looney2ns
IPCT Contributor
- Feb 15, 2017
- 1,502
- 1,159
I ordered the switch.. i am also eventually getting a new router too.. so ill report back the progress.. thanks guys
nymphaeles
Getting the hang of it
- Nov 28, 2017
- 92
- 59
Does anyone connect this cam to the PoE+ switch of a Dahua DHI-NVR52A16-16P-4KS2 and get it working correctly with sufficient power supply?
- Feb 15, 2017
- 1,502
- 1,159
I was already to hit the buy button on this Dahua SD59225U camera but wanted to visit the Dahua site first to see if they still offer them and if they have firmware files available, etc. I cannot find any info on Dahua's own website mentioning this camera. Any idea why this could be?
I have other late model Dahua cameras too that cannot be found on their site and therefore cannot be updated, or so it would seem. Am I missing something here?
I have other late model Dahua cameras too that cannot be found on their site and therefore cannot be updated, or so it would seem. Am I missing something here?
tibimakai
Known around here
Thanks. Would you happen to have a link to that site? I can't find anything like that. I appreciate your help.
tibimakai
Known around here
On the upper right side of the page, chose international.
This is very helpful. Thanks again!
tibimakai
Known around here
I have purchased mine in February and since then, no new updates came out.
Mine came with that software.
If I remember correctly, Andy has posted an updated firmware somewhere, but I couldn't find it again.
Mine came with that software.
If I remember correctly, Andy has posted an updated firmware somewhere, but I couldn't find it again.
I see. I am looking to buy one of these cameras with the wall mount and in English and upgradeable. I am hoping that the camera will run properly with only POE from my switch.
tibimakai
Known around here
You need POE+ switch. It comes with a big(!) 24V brick, though. You may be able to power it, with that and just connect it via Ethernet, just for the data.
I love this cam. It is not super accurate, but it is good enough for me. I may have not setup the IVS rules correctly either.
Sometimes, just zooms into my car's windshield for no reason, or zooms in on my sprinkler, holiday light that changes light modes, but that actually moves, so it is OK.
I love this cam. It is not super accurate, but it is good enough for me. I may have not setup the IVS rules correctly either.
Sometimes, just zooms into my car's windshield for no reason, or zooms in on my sprinkler, holiday light that changes light modes, but that actually moves, so it is OK.