Dahua Starlight Varifocal Turret (IPC-HDW5231R-Z)

Hi,

We are looking for a few additional cameras for our home. They would be deployed outside to cover a few blind-spots. We have used and really like the IPC-HDW5231R-Z cameras.
We thought we would install a few more cameras using the same model. Has anything new came out that we should be looking at using instead? TIA
 
@giomania I have no clue what the process is to add it. I'm using the x86, 32 bit, on Win10 Pro. I'll have a look and see if I can find the 64 bit version.
 
  • Like
Reactions: giomania
Help, none of my IPC-HDW5231R-Z, IPC-HDW5231R-ZE, IPC-HFW5231E-Z5 seem to show IVS lines, snapshots or trigger recording on the NVR5216. I've searched this forum and see numerous others are having this same issue. I've set up IVS and a SMART PLAN within each camera and confirm triggering with direct emails from each camera. My firmware on all the devices seems to be current.

NEED HELP IN DELAWARE.
 
Last edited:
Most likely, the Smart Codec is enabled.
 
I checked and SMART CODEC is not enabled on any camera.

I have a SD59 PTZ and it is displaying the IVS lines on the monitor connected to the NVR5216. Still no triggers that produce markers on playback.
 
GSMarquis said:
What is a HFW5231rp-z? I ordered two of HFW5231r-z and got two of the above.
Click to expand...
I think P indicates the shipping firmware on it is PAL. You can apply NTSC firmware if you want.
 
Thanx for this vid Nayr, gonna mount 2 of these on my front porch, its a top covered porch about 20' across, so gonna put one on each side aimed at the front door and other side. A few years ago some scumbag snuck around my daughters wireless cam aimed at her car from the porch and stole my wife's new copper wind chime that my daughter got her from Tahoe, so these will cover both side 100% Bullets on top for front coverage :)
 
is it possible to enable some of the IVS features and face-tracking in the cam software IN ADDITION to having Blueiris triggers and stuff, or not? or overkill/redundant?
 
Is it possible to set a preset for zoom positions? I'm familiar with the Dahua PTZ GUI, and this looks similar to it, however I'm not seeing any area for presets.
 
djmt99 said:
Is it possible to set a preset for zoom positions? I'm familiar with the Dahua PTZ GUI, and this looks similar to it, however I'm not seeing any area for presets.
Click to expand...

No, and thats not what it is designed for. Use the Zoom at install time to get the field of view you want, then leave it be. It's a Varifocal lens, not a zoom designed to be used on a regular basis.
 
looney2ns said:
No, and thats not what it is designed for. Use the Zoom at install time to get the field of view you want, then leave it be. It's a Varifocal lens, not a zoom designed to be used on a regular basis.
Click to expand...

Well that's a bummer. I have it positioned to capture two doors and was hoping to zoom to just one on a Blue Iris schedule.
 
djmt99 said:
Well that's a bummer. I have it positioned to capture two doors and was hoping to zoom to just one on a Blue Iris schedule.
Click to expand...
You can always give it a shot and see how it goes.
 
Hey guys, Chinese new year is coming soon,

Chinese New year Holiday Schedule:Feb. 12th- Feb.23th, during this time can accept orders,but can ship out ORDERS on 24th.Feb when we back to work.
So we can process the order in the later 6days.
Any urgent thing just send me email at anytime. Thanks for guys always support!

Andy
 
  • Like
Reactions: lordzhon, catcamstar, looney2ns and 5 others
You must log in or register to reply here.
Top Bottom