spammenotinoz
Getting comfortable
Make sure camera is set to 264 not 264h or 264+ with any smart codecs disabled. Just basicSo at one time BI did work with your CPU and QuickSync?
Make sure camera is set to 264 not 264h or 264+ with any smart codecs disabled. Just basicSo at one time BI did work with your CPU and QuickSync?
Wow this wiki is great! I never knew it existed. Is there a way to test for the intel memory leak? The driver recommendation seems to be much older than the one I am using.I've been having a hard time to get quicksync to work, i'm on Windows Server 2016 headless, so can't use any of the DCH drivers. Everything works as long as I keep BI open or just disable HW decoding altogether, even setting the lowest quality UI3 would complain my connection is not fast enough. I tried various drivers I could find but none solved the problem. The video and recording would be choppy and laggy and disconnect every 5 seconds.
What I discovered was if I keep the monitor on and active it would fix the problems, but my monitor would go to sleep after x minutes and the problem would happen again. I also didn't want to keep my monitor powered on unnecessarily as prefer headless.
What I had to do was change the monitor from going to sleep in the advanced power settings, by setting it to never. Once i did that i was in business, I can physically power off the monitor or disconnect it and HW decoding still works.
I also found a copy of non-DCH drivers from the wiki 24.20.100.6229, it also happens to be drivers for Server 2016.
Download Intel® HD Graphics Driver for Windows® Server 2016 for NUC8i7HNK, NUC8i7HVK
My problem wasn't drivers as 24.20.100.6229 had issues. So anyone with weird behaviors try to prevent the monitor from sleeping and see if that helps.
@JonSnow Thank You very much for this info. I had a Annke C800 4K camera that was constantly lagging, unless I RDP'ed into the box. Turned off the monitor power settings as you mentioned and the problem is gone. Strange fix for sure.I've been having a hard time to get quicksync to work, i'm on Windows Server 2016 headless, so can't use any of the DCH drivers. Everything works as long as I keep BI open or just disable HW decoding altogether, even setting the lowest quality UI3 would complain my connection is not fast enough. I tried various drivers I could find but none solved the problem. The video and recording would be choppy and laggy and disconnect every 5 seconds.
What I discovered was if I keep the monitor on and active it would fix the problems, but my monitor would go to sleep after x minutes and the problem would happen again. I also didn't want to keep my monitor powered on unnecessarily as prefer headless.
What I had to do was change the monitor from going to sleep in the advanced power settings, by setting it to never. Once i did that i was in business, I can physically power off the monitor or disconnect it and HW decoding still works.
I also found a copy of non-DCH drivers from the wiki 24.20.100.6229, it also happens to be drivers for Server 2016.
Download Intel® HD Graphics Driver for Windows® Server 2016 for NUC8i7HNK, NUC8i7HVK
My problem wasn't drivers as 24.20.100.6229 had issues. So anyone with weird behaviors try to prevent the monitor from sleeping and see if that helps.