Guessing it is same spec as one of
these
You can run it passively (without power) by looking at the white sockets and identifying which one say audio and connecting the green wire to the +ve side of the audio input and the black lead into the -ve terminal. Without testing this particular mic I don't know if it will run passively but simple enough to test.
If the mic won't work passively you will need to supply between 6-14V DC to the red +ve and black -ve. Note that the black cable will need to connected to power and audio input. Handy if you can solder, if not "3M Scotchlok Connectors" are very easy to use.
In the camera configuration under the audio/video tab, select audio and choose either "mic in" (for passive hookup) or "line in" if you power the mic.