hikvision dvr not booting up

[cliffordau]

OK, but can you point to any 'how-to' instructions?
Hyperterminal? Not sure it exists any more.

hello,

need to bring your device at your local HIKVISION supplier.

There is a special device for doing this...

Thanks..

 

[alastairstevenson]

What sort of special device?
Oh - a magic wand!

 

[whoslooking]

That would be a Pickit 3 programmer with the firmware hex file loaded as Programmer to go! lol

 

[Sunilsyed]

4-pin 1.5mm JST TTL pinout on the board hikvision dvr plz

 

[Sunilsyed]

Hi am cliff from HIKVISION,

you will need to flash the bios which is corrupt

need to do same on the hyper terminal.

Regards.

Cliff.

what u mean hyper terminal?

 

[alastairstevenson]

Use PuTTY instead, much more flexible.
It's a serial or telnet is SSH terminal program.
Hyperterminal is from way back.

 

[Alexmwesigwa]

Hi am cliff from HIKVISION,

you will need to flash the bios which is corrupt

need to do same on the hyper terminal.

Regards.

Cliff.

Hi cliff,why is it that when ever I hit Ctrl + u to stop boot mode, the DVR displays HKVS $

 

[Alexmwesigwa]

Someone help here .why is it that my hyper terminal displays like in the pic below on a newer DVR

 

[alastairstevenson]

Hi cliff,why is it that when ever I hit Ctrl + u to stop boot mode, the DVR displays HKVS $

That's normal, it's the bootloader prompt when the normal boot is interrupted.
I'm assuming you have hit Control-U on startup.

What do you want to do with the bootloader?

 

[sheikh Abdullah]

Hi every one have a nice day, Kindly tell me that from where i can found the bios flash file of hikvision.

 

[alastairstevenson]

A big choice here, depending on whether it's an NVR, DVR, camera etc :

DOWNLOAD EU PORTAL

www.hikvisioneurope.com

 

[kamalgulati]

Hi

How can I connect dvr with Windows PC to flush or fix corrupt BIOS?

Thanks
Kamal

 

[Left Coast Geek]

How can I connect dvr with Windows PC to flush or fix corrupt BIOS

I'd suggest contacting whomever you bought the DVR from first...

but if I followed the rest of this thread correctly, first you need a USB Serial to TTL adapter custom wired to a 4 pin header connector, that you plug into the DVR main board somewhere. this is getting pretty deep in geek land, and really even I would be pretty lost, I've done lots of this sorts of thing in the past with other hardware, but not with a HiKvision NVR, so I have no idea what special weirdness they bring to the table.

 

[kamalgulati]

Mine warranty is over and it was there before we bought the house.

Kind of dead now ...Not booting up as can see anything on Monitor when tried to connect either via hdmi or VGA cable

 

[Left Coast Geek]

time to refresh the system, heh. get a new NVR, new cameras, its all pretty cheap now. new generation 1/1.8" cameras like the Dahua IPC-HDW5442TM have amazing low ight sensitivity.

 

[kamalgulati]

Thanks for the advise. Just wanted to save money for now

And more knowledge to fix existing system rather than putting money into new.

 

[Left Coast Geek]

what model NVR do you have? how old is it ?

 

[kamalgulati]

DS-7200 Series of hikvision and seems was installed in 2016

 

[Bart F]

DS-7200 Series of hikvision and seems was installed in 2016

Hi did you fix the dvr?