How to make IVS work if pointed to the ground?
- Thread starter amrogers3
- Start date
To be clear, that is not with my boobie cam but the 5442-Z4E.
The boobie cam is great and serves a purpose, but I never found the IVS to be that great on it due to the underpowered processor.
bigredfish
Known around here
I'm using an NVR too, 8 that I manage and counting and mine work just fine....
- Have you turned off H.265?
- Are you using IE to make the settings? Some cameras are more sensitive to browser type than others and maybe its not taking a set?
Are you making the settings on the camera interface itself or the NVR?Looks to be on the camera
Do you have any other camera with IVS sitting on a shelf?
When I first tried to understand IVS, I used one on my desk and tried it there. Just to understand how it works. I had IE 11 draw all the IVS lines and frames, so I learned why it wouldn't trigger. Used a cork on a wire.
Later I realized that I want to trigger when there is a human, forget the rest. So I changed from IVS to motion detection with human detection only. Which works well for me. But I really doubt it would work for you in that setting. You never get to see a human.
When I first tried to understand IVS, I used one on my desk and tried it there. Just to understand how it works. I had IE 11 draw all the IVS lines and frames, so I learned why it wouldn't trigger. Used a cork on a wire.
Later I realized that I want to trigger when there is a human, forget the rest. So I changed from IVS to motion detection with human detection only. Which works well for me. But I really doubt it would work for you in that setting. You never get to see a human.
bigredfish
Known around here
DahuaWiki
www.dahuawiki.com
The reason H.265 takes so much processing power to decode is the complexity of how the compression algorithm is written. Also keep in mind that resolutions of 4k to 8k also increasing the load a processor has to decode. The upside to this is the video files essentially can be saved at smaller sizes compared to h.264