I was thinking I would benefit from Smart IR. I have to operate in night mode and IR seems to washout faces so thinking Smart IR fix could help.@Sybertiger - Are they working and meet your needs? If so, why update?
Mine are older than that. Work perfectly for my situation, so I am not tempting it break something else that is working!
It's clearly something in BI (s/w bug?). I have two BI servers (v5.3.6.6 and v5.5.7.8) receiving feeds from the same 8 cams for quite a while. For the 5442 cam that was upgraded, the alerts stopped on both BI servers without having modified anything in the BI settings including how alerts are enabled. I tried a lot of things including simply doing Find/Inspect on the original setup that used to work but no dice. Copying another 5442 (old firmware) configuration in BI then changing the IP address to the 5442 with new firmware THEN doing Find/Inspect was the only thing that got it working again. Get ONVIF trigger events was always checked. The only thing I noted different is ONVIF source changes to 0000 after Find/Inspect whereas on the old firmware ONVIF source would show 000 (3 instead of 4 zeros). Anyhow, I've got it working and I don't have time to pinpoint/diagnose it anymore.I highly suspect there is something on the BlueIris side where you didn't enable the alerts to be processed by BI.
what is the system version with this firmware. Mine still shows 2.84 as opposed to 3.x. Or a I missing something?Hey guys
The Smart IR firmware with SMD 3.0 V2 2022 Feb Version has been released. The update is mainly for Smart IR, IVS and SMD function, highly recommend to update.
This firmware is working great with the help of @Wildcat_1 @looney2ns 2 and lots of guys here.
IPC-T5442T-ZE
IPC-T5442TM-AS
IPC-T5241TM-AS
IPC-B5442E-ZE
IPC-B5442E-Z4E
IPC-T5241H-AS-PV
IPC-D5442E-ZE
IPC-D5442E-Z4E
IPC-HFW5241E-Z12E
IPC-HFW5241E-ZE
IPC-HFW5241E-Z5E
IPC-HDPW5442GP-Z
IPC-HFW5241T-AS-PV
IPC-HFW5541TP-AS-PV
IPC-HDW5541HP-AS-PV
Can refer to the our amazon shop for camera details.
What is the fw build date shows?what is the system version with this firmware. Mine still shows 2.84 as opposed to 3.x. Or a I missing something?
At the end of June, will have a new baseline fw out for this series. Will invite some guys to test it soon.
Has some delay, i am chasing on it.did this ever happen ?