Mini PTZ v1: Firmware Discussion

Hmmm... the dangers of port forwarding, and posting to a public forum.

Code: 
# wall
Interesting what you can still do with a bricked camera.
Interesting what you can still do with a bricked camera.
# who
root            pts/0           00:00   Sep 24 04:19:57  xxxxxxx:53358
root            pts/1           00:00   Sep 24 04:43:15  xxxxxxx:53736
#

*edit*
This is your model number, which will give the capabilities and spec:
[product]
factoryid = 112CEE578E52EEB2CA
model =
inner_model = ZCS022M0020AIDBD1A0000
Click to expand...
 
Sure, but quite dangerous when you can't change the ID/password.
Just be aware of the risks - and I never looked to see what else was on the network, but so easy to do.
Please take care.
And remove your screenshot from earlier, just post text (rollback buffer in PuTTY), not screenshots.
 
alright thank you for giving advice .
ive contacted my agent who sold those cameras so lets see what they will do .
btw do you think it might be software issues ?
so strange how is it possible to happen on the both cameras
 
It is very odd - but I don't have any idea of the cause.
It's a bit like Hikvision where you could be doing a tftp update on one device when another device still on your network reboots and also picks up the update by mistake.
 
yeah but i didnt update i found the model ive bought them from FH-MG200PRZ FENGHE INDUSTRIAL CO., LIMITED (when you scan network it says huisun just rebranding )

- - - Updated - - -

IP 6 inch Auto Tracking high Speed Dome camera
1/3 CMOS sensor,
*20X optical zoom 4.7~84.6mm IR-CUT
*IR Distance up to 100M
*8pcs OSRAM array LEDs with IR
With Auto tracking function and windshield wiper function
Ambarella S2LM+Sony322 2.0MP


this description of my camera can it help to determine whaever its v1 or v2?
 
IP 6 inch Auto Tracking high Speed Dome camera
Click to expand...
If it is as above, it's neither the V1 nor V2 Mini PTZ as they are being discussed in the Huisun section of this forum.
*edit*
This is from a Mini PTZ V2 IP camera:
inner_model = PCS022C0010AIDAD0A0000
Click to expand...
Maybe someone familiar with Huisun model numbers can comment.
 
Last edited by a moderator:
alright i will describe how the engineers solved this problem thanks everyone for spending your time to answer my questions
 
I suspect that applying the factory default settings will be sufficient to bring the camera back to normal.
You could in theory try this yourself, however it may be best to see what level of support you get first.
 
Re: Mini PTZ: Firmware discussion

Hi

Where can I get IPNC_Amba_V1.0.2 Build 201509160901 file
I need it for my camera, thank you

Joe
 
Re: Mini PTZ: Firmware discussion

Hi

Is the IPNC_Amba file password protected, because when I went to unzip it it asks for a password, thank you.
 
Hello everybody,

I would like to ask after a long time, whether there is a mini firmware for the Mini PTZ V1.

Currently is installed with me:

Program Version V1.0.2 Build 201511191322
Control Version MiniPtz_V1.0.2_build201509241507
Web Page Version 1.1.1 Build 20151119
Plugin version 1.0.4.41

Should not there actually be an update since 2015? This firmware is not completely fault-free ...

Are there any firmware alternatives for the HS-SCB405IP-V10?

Best regards
Michael
 
You must log in or register to reply here.
Top Bottom