Mini PTZ v1: Firmware Discussion

klasipca · Jul 11, 2016

I don't have any more v1s so I haven't checked with Monica whether there is a newer version in the past 6 month, but they did upgrade v1s with IMX322 sensor as a result you probably wouldn't want to upgrade yours with anything as it's a very high chance you might brick it.

nikolay167 · Sep 23, 2016

can someone PM me telnet password for huisun camera? i have a question i have 2 huisun cameras and sudenly cameras changed their port to default one and password .so basically i cannot login anymore does anyone had simillar situation ? what can i do ? i want to reboot over telnet maybe it will help

nikolay167 · Sep 23, 2016

thank you very much i m sorry i cannot pm u in privete didnt send 5 msgs yet, do you know how to reset user from telnet ? or what it might a reason why both cameras sudenly changed their ports to standart one and passwords ?

klasipca · Sep 23, 2016

So do you have v1 or v2 and did both of them change at the same time? Have you tried batch tool to try to reset the cameras? Also do you recall what firmware are you running?

nikolay167 · Sep 23, 2016

i was running standart software which was from factory i think it was v1 .where can i donwload this batch tool? i cannot really say do you want i can give you access to camera maybe you will know how to check ?

nikolay167 · Sep 23, 2016

the most interesting part that evyrthing worked fine till one moment ,and both cameras just changed ports i just dont understand how is it possible?

- - - Updated - - -

yes imagine both at the same time

klasipca · Sep 23, 2016

nikolay167 said:
i was running standart software which was from factory i think it was v1 .where can i donwload this batch tool? i cannot really say do you want i can give you access to camera maybe you will know how to check ?

If one cam suddenly change to default port it's possible, but both at the same time....

Btw, start reading this as well as where to get Batch tool
https://www.ipcamtalk.com/showthread.php/13962-Q-amp-A-for-Mini-PTZ-V2-or-everything-we-know-so-far

nikolay167 · Sep 23, 2016

alright thank you

alastairstevenson · Sep 23, 2016

*edit* This is for a V2 - may be similar but different for a V1
With the telnet root access, if you take a look inside the file /home/config/config_net.ini in the 'user' section you will see the usernames and passwords in plain text.

nikolay167 · Sep 23, 2016

how to do so i will log in via root than type /home/config/config_net.ini or should i type vi /home/config/config_net.ini ?

nikolay167 · Sep 23, 2016

when ive login and type this /home/config/config_net.ini its says permission denied

- - - Updated - - -

ive put vi and evrything showed now

nikolay167 · Sep 23, 2016

guys so strange it shows my old password but i couldnt login over the internet it gets this error Network Anomaly

nikolay167 · Sep 23, 2016

and it shows http port 1111
rts port 2222 which are mine .
but why they are not working and i can access camera over port 81? so strange Chinese technology

alastairstevenson · Sep 23, 2016

logon as root, check the files are organised in the same way as the V2 example, look at the contents:

Code:

alastair@PC-I5 ~/cctv/Huisun/custom/mtdblock4$ ls -al home/config
total 588
drwxr-xr-x 4 root root   4096 Jul 18 13:57 .
drwxr-xr-x 4 root root   4096 Jul 18 00:27 ..
-rwsr-sr-t 1 root root 276480 Apr  7 06:17 badpixel_1080P.bin
-rwxr--r-- 1 root root   7359 Jun 25  2015 boa.conf
-rwxrw-r-- 1 root root    409 Oct 14  2015 capability
-rw-r--r-- 1 root root   1641 Jan  8  1970 config_hw.ini
-rwxrw-r-- 1 root root  15904 Mar  1  2016 config_media_130w.ini
-rwxrw-r-- 1 root root  15816 Mar  1  2016 config_media_200w.ini
-rw-r--r-- 1 root root  17129 Jul 18 13:57 config_media.ini
-rwxrw-r-- 1 root root  15811 Mar  1  2016 config_media_ov4689_200w.ini
-rwxrw-r-- 1 root root  15804 Mar  1  2016 config_media_ov4689_400w.ini
-rw-r--r-- 1 root root   2760 Jun 18 03:29 config_net.ini
-rw-r--r-- 1 root root  18489 Jan  1  1970 config_onvif.ini
-rw-r--r-- 1 root root     99 Apr  7 06:15 config_strange.ini
-rw-r--r-- 1 root root     99 Jul 17 21:55 config_time.ini
drwxr-xr-x 2 root root   4096 Jan  1  1970 default
-rw------- 1 root root 101008 Jul 17 21:56 dome_setting.bin
-rwxrwxr-x 1 root root  37168 Mar  3  2016 hwconf_server
-rwxrw-r-- 1 root root   1775 Oct 19  2015 ipnc.pem
-rw-r--r-- 1 root root   3072 Jun 20 07:59 ptz_preset_value.bin
-rw------- 1 root root   6528 Jan  1  1970 ptz_sequence_value.bin
-rw-r--r-- 1 root root    270 Jan  8  1970 qrcode.png
-rwxrw-r-- 1 root root    134 Oct 19  2015 stunnel.conf
-rwxrw-r-- 1 root root   1050 Jan  7  2016 tinyproxy.conf
drwxrwxr-x 2 root root   4096 Mar  3  2016 upgrade
alastair@PC-I5 ~/cctv/Huisun/custom/mtdblock4$ 
alastair@PC-I5 ~/cctv/Huisun/custom/mtdblock4$ cat home/config/config_net.ini
[eth]                                            
ipv4enable                     = 1              
dhcp                           = 0              
ipaddr                         = 192.168.0.97   
mask                           = 255.255.255.0  
gateway                        = 192.168.0.1    
dns                            = 192.168.0.1    

ipv6enable                     = 1              
dhcpv6                         = 0              
ipaddrv6                       = ::             
maskv6                         =                
gatewayv6                      =                
dnsv6                          =                
[wifi]                                           
ssid                           = test           
wifiencryption                 = wep            
wifipwdtype                    = ascii          
wifipwd                        = 123456         
wifikeynum                     = 1              
wifidhcp                       = 0              
wifiipaddr                     = 192.168.1.200  
wifimask                       = 255.255.255.0  
wifigatway                     = 192.168.1.1    
wifidns                        = 192.168.1.1    

wifissid                       = test           
wifiencription                 = wep            
wifigateway                    = 192.168.1.1    
wifiworkmode                   = 1              
wifisafemode                   = 1              
wifichannel                    = 1              
wifidbm                        = 1              
wifispeed                      = 1              
wifinetmode                    = 0              
wifiencrypttype                = 1              
wifimultiaddress               = 192.168.1.1    
wifidnsbackup                  = 192.168.1.1    
[user]                                           
userindex                      = 1              
user0                          = 0:0xff:redacted:admin
user1                          = 0:0x00:#:#     
user2                          = 0:0x00:#:#     
user3                          = 0:0x00:#:#     
user4                          = 0:0x00:#:#     
user5                          = 0:0x00:#:#     
user6                          = 0:0x00:#:#     
user7                          = 0:0x00:#:#     

[server]                                         
devk                           = 1              
devdh                          = 1              
devxm                          = 1              
devtd                          = 1              
devzn                          = 1              
platulk                        = 0              

devkport                       = 8000           
[custom]                                         
show_model                     = 0              
alastair@PC-I5 ~/cctv/Huisun/custom/mtdblock4$

nikolay167 · Sep 23, 2016

thank you ,hm you know when i copy your first line command it says not found ~/cctv/Huisun/custom/mtdblock4$ ls -al home/configtotal 588

alastairstevenson · Sep 23, 2016

Code:

ls -al /home/config

*edit*
http://www.tutorialspoint.com/unix_commands/index.htm
Handy guide - but only a subset of commands will be implemented, depending on the version of Busybox installed.
Pretty good on Huisun, Longse.
Pretty limited on Hikvision, especially if psh is in play.

nikolay167 · Sep 23, 2016

hm it shows less files than on your system

do you think software could damage by it self? on this pic what do i have on my camera

alastairstevenson · Sep 23, 2016

This is for a V2 - may be similar but different for a V1

I don't have a V1 to play with.
Unless anyone would like to send me a bricked one to fix.

nikolay167 · Sep 23, 2016

hm how to heck in terminal whatever its v2 or v1?

nikolay167 · Sep 23, 2016

ps my camera supports auto tracking i think only v2 does support it

Search

Mini PTZ v1: Firmware Discussion

klasipca

Banned

nikolay167

Banned

nikolay167

Banned

klasipca

Banned

nikolay167

Banned

nikolay167

Banned

klasipca

Banned

nikolay167

Banned

alastairstevenson

nikolay167

Banned

nikolay167

Banned

nikolay167

Banned

nikolay167

Banned

alastairstevenson

nikolay167

Banned

alastairstevenson

nikolay167

Banned

alastairstevenson

nikolay167

Banned

nikolay167

Banned