PTZ fails after firmware update

вы можете исправить конфиг на получение снапшота в 1080? мне очень нужно на 2х камерах
 
IPC_XM550_50X50-WG_WIFIXM713G_TB_AF.713g.Nat.dss_V5.00.R02.20221207_all с поддержкой Onvif нет вариантов?
V5.00.R02.00030747.10000.349917.0000000
 
Oleglevsha said:
зайти в меню камеры и нажать кнопку выгрузить файл конфигурации
View attachment 176118
View attachment 176119
Click to expand...
в принципе все просто, делаю как на картинке. но не хочет выгружать файл конфигурации. странно. открываю, выбираю место для сохранения, нажимаю ок. и ничего. и файла нету... странно. сейчас буду пробовать ваш скачаю
 
Oleglevsha said:
Исправил конфиг для выбора нужного разрешения видео и выложил на сайте, скачайте прошивку, после обновления сбросте к заводу и заново настройте камеру
Ссылка
кто проверит дайте обратную связь, работает или нет )
Click to expand...
все проверил. поставил. фактори ресет полный. настроил. тепер все работает!))) ура) ONVIF работает, зум работает потоки есть все. Но есть снова один нюанс. пробую поставить адрес камере в другой подсети, не хочет сохранять. отключаю DHCP , а оно все равно его держит в нулевой сети. ставлю ему адрес 192.168.110.77, а оно его кидает на 192,168,0,2. очень странно. поиграюсь сейчас еще с этим. ( я не первый раз это делаю и вряд ли я забыл где то галочку снять)
 
Андрей Перескоков said:
все проверено. поставил. фактори сброс полный. построил. тепер все работает!))) ура) ONVIF работает, зум работает потоки есть все. Но есть еще один нюанс. Пробую поставить адрес ячейки в другую подсеть, не хочет сохранения. отключаю DHCP, а оно все равно его держит в нулевой сети. Ставлю ему адрес 192.168.110.77, а его оно кидает на 192,168,0,2. очень странно. поиграюсь сейчас еще с этим. ( я не первый раз это делаю и вряд ли я забыл где то галочку снять)
Click to expand...
регистратор меняет адрес отключите IP Adaptive
 
Oleglevsha said:
регистратор меняет адрес отключите IP Adaptive
Click to expand...
нет.... к сожалению.... уже 2 часа долбаюсь с ней... ставлю DHCP и даже если включаю в другую сеть (192,168,1,1) она присваивает себе адрес 192,168,0,2. Кроме 0 не хочет присваивать. ставлю вручную без DHCP 192,168,1,14, а она зараза ставит себе 192,168,0,2. и хоть ты тресни. ставлю DHCP и включаю в нулевую сеть тогда присваивает 192,168,0,80. Это просто пздц какой то....
 
Good afternoon, I have an ip camera which after firmware update, the ptz controls stopped working, I would like to know if there is any way to reverse the situation, thanks.
 

Attachments

  • Sem título.png
    Sem título.png
    143.3 KB · Views: 24
  • Sem título1.png
    Sem título1.png
    148.2 KB · Views: 24
Здравствуйте, может кто помочь в поиске прошивки для камеры Sectec st-ipptz-270-5m-30x-xm-4g, на сайте производителя написано что в ней стоит процессор XM550AI, но в программе XMeye пишется что версия устройства xm530, у камеры после обновления перестала работать ИК подсветка. Заранее спасибо.
 

Attachments

  • Screenshot_20231206-090837.jpg
    Screenshot_20231206-090837.jpg
    340.2 KB · Views: 12
anilgsal said:
Upgrade this firmware
Click to expand...
camera was working fine except the onvif so I upgraded to this version:IPC_XM550_50X50-WG_WIFIXM713G_TB_AF.713g.Nat.dss_V5.00.R02.20221207_all(1) (2). Everything came out pink, it doesn't show the micro SD or move the PTZ. Help do I need to revert to the original firmware or downgrade? Here is the description of the camera:
model:A8
Lens:3.6mm
A8-5M--US
Firmware:V5.00.R02.0003079A.10010.349f17.0000000
Device Version:R80XD50-PQ
Serial Number:96e208adac83c81d
 
rammbh said:
Guys, some help..
Explaining the madness: my Chinese IPC has the XM530 chip but the firmware installed and the update made are from the XM550 version.
I decided to update because the manual focus doesn't work and at night, everything is blurred.

This file below, made my manual focus come back, but I run out of RTSP, which I need: "General_IPC_XM550_R80X50-PQ_WIFIXM713G_AF.713g.Nat.dss.OnvifS.HIK_V5.00.R02.20210626_all.bin"

This file below, stopped my zoom and focus: "Alarmsystem_IPC_XM550_R80X50-PQ_WIFIXM713G_AF.713g.Nat.dss.OnvifS.HIK_V5.00.R02.20210626_all.bin"

So I tried reverting with old XM550, which caused Manual Focus to stop again. I updated again with another XM550 and the manual focus came back, without RTSP.
Finally I found the correct XM530 from the IPC chip but I brick my firmware. I thought I was right to resolve all errors, but no.
Can anyone help me get the camera working again? thanks
Click to expand...

I updated my PTZ camera manually with the wrong firmware and did not make the tour or PTZ or recognize the SD.
In the icsee app I see that it has been updated to a version of the camera that supports zoom but mine doesn't and flashes the LEDs at night. Trying to repair I upgraded to another one that left my camera without access to search to connect to it by ipv4 or nearby camera, it only shows the night LEDs and does not record anything on the sd.
It's practically brick-and-mortar. wrong firmware that I did connect:
Alarmsystem_IPC_XM530_R80X20-PQ_WIFIXM711.711.Nat.dss.OnvifS_V5.00.R02.20200411_all-new1.
Firmware that left no access to the camera: IPC_XM550_50X50-WG_WIFIXM713G_TB_AF.713g.Nat.dss_V5.00.R02.20221207_all
 
Alex Cam said:
Hello !
-I have since disassembled the camera and connected via serial port (USB-TTL).
When booting is stopped at startup (CTR+C), it unfortunately asks for a password.
None of the passwords I found online work. That I should pass the password to be able to give instructions.
(Camera tries to restart every minute)
-I copied the contents of the Flash (MX25L6433F) as well as the contents of Flash from another good camera.
-I found a live LAN address that I can ping (192.168.7.174), but I can't use it for anything else (e.g. TFTP)

Please help me..
Thanks

PS: Oleglevsha, maybe you can help me??
Click to expand...

I updated my PTZ camera manually with the wrong firmware and did not make the tour or PTZ or recognize the SD.
In the icsee app I see that it has been updated to a version of the camera that supports zoom but mine doesn't and flashes the LEDs at night. Trying to repair I upgraded to another one that left my camera without access to search to connect to it by ipv4 or nearby camera, it only shows the night LEDs and does not record anything on the sd.
It's practically brick-and-mortar. wrong firmware that I did connect:
Alarmsystem_IPC_XM530_R80X20-PQ_WIFIXM711.711.Nat.dss.OnvifS_V5.00.R02.20200411_all-new1.
Firmware that left no access to the camera: IPC_XM550_50X50-WG_WIFIXM713G_TB_AF.713g.Nat.dss_V5.00.R02.20221207_all.

How do I connect that camera via USB or that port (USB-TTL)? And how do I extract the flash from another camera? Is that TFTP to ship the firmware as I do it? And the password isn't 1234567890?
 
rammbh said:
Guys, some help..
Explaining the madness: my Chinese IPC has the XM530 chip but the firmware installed and the update made are from the XM550 version.
I decided to update because the manual focus doesn't work and at night, everything is blurred.

This file below, made my manual focus come back, but I run out of RTSP, which I need: "General_IPC_XM550_R80X50-PQ_WIFIXM713G_AF.713g.Nat.dss.OnvifS.HIK_V5.00.R02.20210626_all.bin"

This file below, stopped my zoom and focus: "Alarmsystem_IPC_XM550_R80X50-PQ_WIFIXM713G_AF.713g.Nat.dss.OnvifS.HIK_V5.00.R02.20210626_all.bin"

So I tried reverting with old XM550, which caused Manual Focus to stop again. I updated again with another XM550 and the manual focus came back, without RTSP.
Finally I found the correct XM530 from the IPC chip but I brick my firmware. I thought I was right to resolve all errors, but no.
Can anyone help me get the camera working again? thanks
Click to expand...
The same thing happened to me as it did to you, only I kept testing firmware and bricking my camera. It just turns on the infrared LED and I can't access it. Here's the firmware you locked it with: IPC_XM550_50X50-WG_WIFIXM713G_TB_AF.713g.Nat.dss_V5.00.R02.20221207_all(1) (2).
Also here is a page where they give the password and username of the board and explain how to revive. Since I don't have the tools, maybe you understand and make a tutorial for me:
Unbricking your Dahua IP camera (Tips, Tricks & Firmware) - IP/Megapixel Cameras and Software Solutions - CCTVForum.com
 
You must log in or register to reply here.
Top Bottom