PTZ fails after firmware update

Thank you. I opened my camera and did not find any sd card slot. Any other way to upload script?
 
Oleglevsha said:
[ЦИТАТА="gerki111, сообщение: 703360, участник: 155405"]
Привет

Обновился до этой прошивки, но тур не работает и фокус тоже не работает.
Как настроить тур?

View attachment 140887
[/ЦИТИРОВАТЬ]

ПО и прошивки для камер видеонаблюдения Dahua, Hikvision, XM

На нашем сайте Вы можете скачать свежее ПО и прошивки для камер видеонаблюдения Dahua, Hikvision, XM, а также для видеорегистраторов и другого оборудования.
alarmsystem-cctv.ru alarmsystem-cctv.ru
Click to expand...

Will one of the firmware’s sort out the tour?
 
Guys, some help..
Explaining the madness: my Chinese IPC has the XM530 chip but the firmware installed and the update made are from the XM550 version.
I decided to update because the manual focus doesn't work and at night, everything is blurred.

This file below, made my manual focus come back, but I run out of RTSP, which I need: "General_IPC_XM550_R80X50-PQ_WIFIXM713G_AF.713g.Nat.dss.OnvifS.HIK_V5.00.R02.20210626_all.bin"

This file below, stopped my zoom and focus: "Alarmsystem_IPC_XM550_R80X50-PQ_WIFIXM713G_AF.713g.Nat.dss.OnvifS.HIK_V5.00.R02.20210626_all.bin"

So I tried reverting with old XM550, which caused Manual Focus to stop again. I updated again with another XM550 and the manual focus came back, without RTSP.
Finally I found the correct XM530 from the IPC chip but I brick my firmware. I thought I was right to resolve all errors, but no.
Can anyone help me get the camera working again? thanks
 
  • Like
Reactions: johnmasster
Updating, i was able to connect the IPC via raspberry and it is showing this message infinitely:

U-Boot 2014.04 (18 de março de 2020 - 19:56:55)


CPU:


U-Boot 2014.04 (18 de março de 2020 - 19:56:55)


CPU:


U-Boot 2014.04 (18 de março de 2020 - 19:56:55)


CPU:


U-Boot 2014.04 (18 de março de 2020 - 19:56:55)


CPU:
 
Last edited:
hello everyone
can you please help me with my new cam, my only mistake was updating the Firmware right after installing it by minute , now the cam is not booting and the ip in my lan is appearing but not running on any CMS / VMS !! . after scanning the open ports i found only 12901 and 10387 are open !! all details are in the below snapshot which i took becuase i felt that the upgrade will not go smoothly via the Icsee app for some reason !!
 

Attachments

  • 60c9f9e2-3942-483b-8763-bd309fb69430.jpg
    60c9f9e2-3942-483b-8763-bd309fb69430.jpg
    51.1 KB · Views: 33
Alex Cam said:
Hi. I'm new here and not sure if this is the right topic for this post. I have a problem with an
IP-PT camera after upgrade.
The camera: XM-PT-827-80W. I have several such cameras.
One of the IP cameras stopped during the update, so the update was not completed.
The camera won't start and I can't communicate with it. Using the reset button does not help.
I updated on my mobile, but the installation was interrupted after 15 minutes.(Not a power outage.I waited patiently).
After that, the camera will not start.
The camera does not turn on, the lights do not flash when the power is connected!
I can't communicate with the camera. Only the LED of the Ethernet connector
lights up, but communication does not work here either.

Any chance to recover camera after bad flash firmware?
Firmware version: 000629G3.1IPC_NT98562_80N40_S38.Nat.dss.OnvifS.HIK_V5.00.R02 (V5.00.R02.00063910.10010.140317.00)

Thanks for any suggestions!

Ps: Sorry for the Google translation - Entschuldigung, ich habe Translator verwendet-
Click to expand...


Hello !
-I have since disassembled the camera and connected via serial port (USB-TTL).
When booting is stopped at startup (CTR+C), it unfortunately asks for a password.
None of the passwords I found online work. That I should pass the password to be able to give instructions.
(Camera tries to restart every minute)
-I copied the contents of the Flash (MX25L6433F) as well as the contents of Flash from another good camera.
-I found a live LAN address that I can ping (192.168.7.174), but I can't use it for anything else (e.g. TFTP)

Please help me..
Thanks

PS: Oleglevsha, maybe you can help me??
Alex Cam said:
Hi. I'm new here and not sure if this is the right topic for this post. I have a problem with an
IP-PT camera after upgrade.
The camera: XM-PT-827-80W. I have several such cameras.
One of the IP cameras stopped during the update, so the update was not completed.
The camera won't start and I can't communicate with it. Using the reset button does not help.
I updated on my mobile, but the installation was interrupted after 15 minutes.(Not a power outage.I waited patiently).
After that, the camera will not start.
The camera does not turn on, the lights do not flash when the power is connected!
I can't communicate with the camera. Only the LED of the Ethernet connector
lights up, but communication does not work here either.

Any chance to recover camera after bad flash firmware?
Firmware version: 000629G3.1IPC_NT98562_80N40_S38.Nat.dss.OnvifS.HIK_V5.00.R02 (V5.00.R02.00063910.10010.140317.00)

Thanks for any suggestions!

Ps: Sorry for the Google translation - Entschuldigung, ich habe Translator verwendet-
Click to expand...
 

Attachments

  • PW-.png
    PW-.png
    30 KB · Views: 21
  • Warning_MAC.png
    Warning_MAC.png
    34.7 KB · Views: 20
  • Like
Reactions: johnmasster
Someone have any this firmware's below working PVT and RTSP stream fines?
V5.00.R02.00030737.10010.3f9f17.0020000
ou
V5.00.R02.00030737.10010.349f17.0020000

tks
 
Hello together,
I have a cam like NG4RT with 22718
The picture is there and really nice.
But....... in the App XMeye the Software says allways Wrong Password.
I know, that the password is to 100 % right.
The username admin and the password can not be changed.
So,, I have to create a new one with a name and password. Question: Is it possible, also with administrator to create or do I have to change in operator?

best regards

Jim
 
hi there after updating my ipc cam with 03695 firmware it lost the onvif fuction.
so i use i firmaware from alarmsystem.ru.

now the cam works fine but i can not access from webui or icsee app... it askes for password.
does any one now the password for accessing the cam.

also tried the reset tool but no sucess.
thanks
 
nikiforos said:
hi there after updating my ipc cam with 03695 firmware it lost the onvif fuction.
so i use i firmaware from alarmsystem.ru.

now the cam works fine but i can not access from webui or icsee app... it askes for password.
does any one now the password for accessing the cam.

also tried the reset tool but no sucess.
thanks
Click to expand...
00030695 ? This is your camera ?
 
Всем привет.
Нужна прошивка на r80xd350-pq / 0003079A. Обновил прошивку. Теперь не рад.
Эта сейчас стоит: V5.00.R02.0003079A.10010.349f17.0000000
Мне нужна 2022 года.
Поделитесь пожалуйста.
Хочу откатить камеру.
 
Last edited:
Может есть у кого прошивка IPC_XM550_50X50-WG_WIFIXM713G_TB_AF.713g.Nat.dss_V5.00.R02.20221207_all с поддержкой Onvif
V5.00.R02.00030747.10000.349917.0000000 камера SATURN 30x ZOOM AF PTZ
 
You must log in or register to reply here.
Top Bottom