Bitslizer
Pulling my weight
- Joined
- Nov 23, 2017
- Messages
- 467
- Reaction score
- 193
Many thanks!I will fire it back up and check for a firmware update.
@EMPIRETECANDY do you know of an update?
Many thanks!I will fire it back up and check for a firmware update.
@EMPIRETECANDY do you know of an update?
Also the PIR on this would be a god send, I just have another partly cloudy and windy day, the sunny/cloudy shadow + trees branches shadows is setting off my Hikvision 6003 MD like crazy!I will fire it back up and check for a firmware update.
@EMPIRETECANDY do you know of an update?
Hi, cannot answer for this VTO2111D-WP in particular, but for the VTO2000A (see [Review] VTO2000A & VTH1550CH & VTNS1060A Intercom Kit) I got the official answer from DAHUA that extented capabilities (like IVS etc) are not possible with these cams, however if you are willing to stream 24/7 from VTO to your NVR, then the latter can do basic motion detection. But beware, especially with "battery" VTO's, it will drain batteries fast, and consume bandwidth from VTO to your NVR. I have, for reasons of physical security, separated this physical network from my home network.I am also interested in this, if its reliable. I am installing 4 dahua cameras /w (4801-4k)NVR and this guy wants a door bell cam that connects to the nvr with the motion alert push notification via gDMSS app. I was reading a thread here about the VTO2111D-WP Dahua VTO2111D-WP Information and Hacking and it sounds like it does work with the NVR and app, but what about the motion alerts? any tips on a product that would work is much appreciated, Thanks.
Sorry, I have no experience with the Hik.Looney, how would you compare the DB1 from Hikvision to the DB11 from Dahua? Which is better/worse and why?
So no new firmware? TIAI will fire it back up and check for a firmware update.
@EMPIRETECANDY do you know of an update?
Yes sir.Here’s a question I haven’t seen asked:
If all I want is a doorbell cam that can integrate with BI for both audio and video and I don’t care about real time listening or installing another app on my phone (other than for setup) then would this be a good choice? It’s beginning to sound like the answer is “yes”.
Have a look at [Review] VTO2000A & VTH1550CH & VTNS1060A Intercom Kit for example?hi, I would like to install a set of video intercom. Any suggestion?
Sure, you can setup motion or zone crossing in Bi and push notifications based on that.quality looks pretty damn good. looks like the main drawback is that its just WiFI (non POE) and the audio is a bit low
Any other cons we should be concerned about? If we dont want to use the lechange app, will we get notified via the blue iris app when there is motion , or ring?
yes, comes with the doorbell kit that will attach to your current doorbell transformerSo how do you get power to this device? I don't have access to run wiring to the front door. Can it use the existing transformer wires for the traditional doorbell I have? Thanks
So the existing doorbell wires can be used? I wouldn't be able to run different wires to the transformer. Thanksyes, comes with the doorbell kit that will attach to your current doorbell transformer
Yes, you can use the existing doorbell wires.So the existing doorbell wires can be used? I wouldn't be able to run different wires to the transformer. Thanks