Review-Dahua SD6CE245U-HNI Starlight PTZ 45x Zoom

[Bob Schulz]

Try to play with Web UI, conditions manual, set 0 for both. You might have to change multiple profiles.

That did it. Thank you

 

[DwightMorgan]

What is the latest firmware for these? Thinking of playing with autotracking again. @EMPIRETECANDY

Currently running:
System VersionV2.623.0000000.13.R.E4.4510.UN.NR, Build Date: 2018-12-05
WEB Version3.2.1.667589
ONVIF Version16.12(V2.4.3.574996)
PTZ VersionV2.400.0000000.10.RHNAD_171212_5259
S/N4M0742APAJ752D8
Security Baseline VersionV1.3

 

[looney2ns]

What is the latest firmware for these? Thinking of playing with autotracking again. @EMPIRETECANDY

Currently running:
System VersionV2.623.0000000.13.R.E4.4510.UN.NR, Build Date: 2018-12-05
WEB Version3.2.1.667589
ONVIF Version16.12(V2.4.3.574996)
PTZ VersionV2.400.0000000.10.RHNAD_171212_5259
S/N4M0742APAJ752D8
Security Baseline VersionV1.3

Dahua Technology - World-leading Video-centric AIoT Solution and Service Provide

Dahua Technology

www.dahuasecurity.com

 

[DwightMorgan]

Dahua Technology - World-leading Video-centric AIoT Solution and Service Provide

Dahua Technology

www.dahuasecurity.com

Has anyone tested? I need to figure out NP vs PN it looks like from that search.

 

[looney2ns]

NTSC Vs PAL
Doesn't make any difference, it's all digital.

 

[cd36]

I've been following the auto tracking thread (Dahua poor auto tracking - What am I doing wrong?) and have noted that one of the other PTZ cameras has the ability to trigger a preset when a tripwire or intrusion box is activated. I know my current firmware, which is not the latest, does not offer that option. Does anyone know if the latest firmware provides for this functionality?

Are you looking at where a fixed camera can trigger a ptz to move to a preset? If so I think you need an nvr52xx to do that.

 

[DwightMorgan]

Are you looking at where a fixed camera can trigger a ptz to move to a preset? If so I think you need an nvr52xx to do that.

You can leverage triggers from cameras (built in or BI trigger)and have Blue Iris send a PTZ to a fixed position.

 

[cd36]

You can leverage triggers from cameras (built in or BI trigger)and have Blue Iris send a PTZ to a fixed position.

Yes but I don't think you can do it natively with standalone cameras can you? I believe you need an nvr or BI to communicate between cameras.

 

[DwightMorgan]

Yes but I don't think you can do it natively with standalone cameras can you? I believe you need an nvr or BI to communicate between cameras.

Makes sense to me, something has to coordinate.

 

[cd36]

Makes sense to me, something has to coordinate.

Ya, in the example they were talking about I believe the person had done it on an nvr5208, whose interface would look very similar to their camera, that's why they would be confused why they can't see the same options on their camera. They probably didn't realize they were looking at an nvr interface.

 

[looney2ns]

Has anyone tested? I need to figure out NP vs PN it looks like from that search.

I've ran it for a week so far. No issues.

 

[DwightMorgan]

I've ran it for a week so far. No issues.

Apply all bin files? Skip the one with boot in it? @looney2ns

 

[looney2ns]

Apply all bin files? Skip the one with boot in it? @looney2ns

Just the single largest bin file.

 

[DwightMorgan]

Just the single largest bin file.

Factory reset after upgrade? Is before (with full IP reset) needed as well normally? @looney2ns

 

[DwightMorgan]

After this upgrade does this camera support both facial and vehicle detection?

 

[looney2ns]

Factory reset after upgrade? Is before (with full IP reset) needed as well normally? @looney2ns

I always do a before and after factory reset.
AI features are not added.

 

[DwightMorgan]

I always do a before and after factory reset.
AI features are not added.

Bummer, it came with facial... I was hoping vehicle was added.

 

[DwightMorgan]

Is there a way to tell what your focal length is at a particular time on this camera? Trying to figure out what I need for a particular scene to spec out a 2nd camera.