Hound Dog 911
Getting comfortable
- Joined
- Jan 30, 2017
- Messages
- 835
- Reaction score
- 320
Just pulled the trigger on the Sea Level 120 poe. Gives me some expansion room. And hopefully integrates will BI well.
my 5231 turret that watches the car is out in the open and has been rained on and I don't notice any water issues with the view.Do you guys put anything on the lens to repel water?
This is what I getting.
That's just the product page. I was looking through their PTZ firmware section yesterday but couldn't find anything new, maybe I missed something...Anyone using any of the firmwares from here?
What are you currently running? I'm onThere is a PAL and NTSC version that are slightly newer than what I have, and a general one that is from this year not sure what the difference is?
If you click the far right tab at the bottom where it has the specs, accessories, etc it's got download, then firmware, I'm running 7/12/2016 firmware.That's just the product page. I was looking through their PTZ firmware section yesterday but couldn't find anything new, maybe I missed something...
What are you currently running? I'm on 3.210.0002.2 Build: 21/07/2016
Right you are. Damn well been there in the past too, haha.If you click the far right tab at the bottom where it has the specs, accessories, etc it's got download, then firmware, I'm running 7/12/2016 firmware.
Those specs I quoted were for my blooming NVR, updated my post. Seems I have slightly newer firmware to yours.I'm running 7/12/2016 firmware.
So you are already on the newest it looks like, I should be good to upgrade then, still may wait to see if a few others have done it, ptz is an expensive camera to mess around with lolThose specs I quoted were for my blooming NVR, updated my post. Seems I have slightly newer firmware to yours.
Yep and I still have the issue with the IR being hyper sensitive. Probably best the update attempt be done with a firmware update which actually resolves our problems. I'm comfortable upgrading my turrent cams but the PTZ as you said expensive to screw up.So you are already on the newest it looks like, I should be good to upgrade then, still may wait to see if a few others have done it, ptz is an expensive camera to mess around with lol
Right click on the screen and uncheck "IVS Rule"When I setup IVS on the cam the tripwire and intrusion lines are appearing on the video on the NVR. Is there a way to turn that off?