Thanks for that info, so I would like to figure what footage/meters the 32mm length is to see if I have a good placement for this CAM. I have a long drive up to our property/house but many trees block certain views.
Teaser Info and Mini Review - Empiretech B52IR-X3 Triple Lens Camera
- Thread starter Ri22o
- Start date
flynreelow
Known around here
- Dec 12, 2016
- 1,352
- 1,237
I still need to work on settings, but it seems to be doing a better job than the Z12E at night. This is likely due to the amount of IR it throws out.
First you people made me buy a PTZ, then an S3, then a thermal camera, and now this 
.
.
We like spending your money, hahaFirst you people made me buy a PTZ, then an S3, then a thermal camera, and now this
Well Andy likes it
What do you mean "you people"?First you people made me buy a PTZ, then an S3, then a thermal camera, and now this
Here some night video. internal IR only, no other light source.
cold, rain, snow, slippery ground, ... so at least posting something
I didnt invest too much time cutting,
had some trouble to download the media from sdcard. when IVS is triggered the downloaded video starts again. most footage is useless because it starts over and over again after a few secs.
maybe related to the browser plugin
will invest bit more time next days when it stops raining and snow is gone.
couldnt go outside with laptop to find bit better settings, too rainy, footage bit noisy, wasnt visible on mobile
but i think the cam has some good night view on all channels with internal infrared only.
here are the settings used on the video
Infrared Auto Mode
cold, rain, snow, slippery ground, ... so at least posting something
I didnt invest too much time cutting,
had some trouble to download the media from sdcard. when IVS is triggered the downloaded video starts again. most footage is useless because it starts over and over again after a few secs.
maybe related to the browser plugin
will invest bit more time next days when it stops raining and snow is gone.
couldnt go outside with laptop to find bit better settings, too rainy, footage bit noisy, wasnt visible on mobile
but i think the cam has some good night view on all channels with internal infrared only.
here are the settings used on the video
| Panorama | Medium | Distant | |
| Contrast | 53 | 52 | 52 |
| Sharpness | 53 | 52 | 52 |
| Gamma | 47 | 47 | 47 |
| Shutter | 0 - 6.66 | 0 - 8 | 0 - 12 |
| Gain | 0 - 28 | 0 - 30 | 0 - 25 |
| Exposure Comp | 35 | 40 | 40 |
| 3D NR | 50 | 50 | 55 |
| 2D NR | 50 | 40 | 55 |
Infrared Auto Mode
Yes. You can actually choose which channel(s) are recorded when triggered.
Yes
If you dont install the plugin, you see each channel seperate in the webinterface playback from sd card. So you have to go back, search again on different channel
If you install the plugin, you see all three channels at the same time on IVS playback. When using continous+ivs record, the playback switch to 3 channel mode on IVS, then going back to the selected channel.
For some reason if i download a video clip (selected time) with the plugin, the video loops around the IVS trigger
This is also on DMSS app.