FlyingRain
n3wb
- Joined
- Sep 2, 2015
- Messages
- 22
- Reaction score
- 0
Since upgrading to this firmware (I believe) my second harddrive will not go to sleep. It's certainly not sleeping, I think it might have started after the upgrade. Any suggestions?
Hi Jacngo, would you be so kind of making the rest of us as happy as you (and Larry) by posting the modded FW you used?I managed to upgrade the firmware on my Hikvision DS-7608N-E2/8P (has 8 poe ports) to current version of 3.4.80 Build 160718 (18th July 2016) hehehehehe ....
...I was nervous my language would be reset back to chinese but since its hacked into english already by seller, it worked fine for me.
I am happy as Larry
I think that changed with FW>3.4.0. Using the English GUI to upgrade the 3.4.0 FW to 3.4.2 which caused the 7816E1 to revert to Chinese. I went back to 3.0.10 using uart/u-boot and upgraded to 3.4.0 which left the NVR in English.Check out this supplemental post:
https://www.ipcamtalk.com/showthread.php/12786-Updated-NVR-firmware-published-NVR_78_79_EXX_V3-4-80_160718-zip?p=116790&viewfull=1#post116790
A web GUI update of a CN NVR that has EN menus will generally retain the EN menus by a setting held in the configuration file and retained / updated during the update, which is what was done here.
However - a reset to defaults will revert to menus linked to the original CN region of the NVR. Note that a tftp update will also reset to defaults. @ibruce - what model NVR do you have, what firmware is currently installed, and what changes / improvements are you looking for?
Thanks for that - I didn't know, as I've been running 'hacked to English' firmware from 3.3.4 onwards on my 7816N-E2 s for quite a while now.I think that changed with FW>3.4.0.
Was that on a Chinese region NVR?I updated via web-gui from 3.3.4 to 3.4.6 no problem. So you might want to try that jump.
Can anybody help please?Thanks clarifying.
I have a DS-7608N-E2 / 8P running on V3.4.6 build 160405
Not looking for any specific changes/improvements, just wanted to make sure I'm on the most recent stable release that's all.
Also, my cameras are all DS-2CD2032-I running on [FONT=Arial, Helvetica, sans-serif]V5.2.5 build 141201[/FONT]
[FONT=Arial, Helvetica, sans-serif]Needless to say the above is CN and I want to keep EN version. What would you recommend to install as latest FW release for both the NVR and the cameras?
THANKS FROM A NOOB!!![/FONT]