PTZ fails after firmware update

jettimu

n3wb
Joined
Jun 29, 2020
Messages
2
Reaction score
0
Location
Germany
Hi,

Are you able to re-post this binary file please?

The link above apprears to be a differant binary file.

Model of my camera is NM4RT-20718EP

Thanks.
Hello Idrism2,
do you solved your Problem with your Firmware ?
I also made an Firmwareupgrade (Modell: NM4RT-20718EP) and now my PTZ is also not working.
Do you got the Firmware ?

Regards
 

jettimu

n3wb
Joined
Jun 29, 2020
Messages
2
Reaction score
0
Location
Germany
Hello, Thanks for Feedback
But this Firmware isn't working with my Camera -> i get an Error.
 

queen-shit

n3wb
Joined
Jul 9, 2020
Messages
4
Reaction score
1
Location
Spain
Hi, I have this type of Chinese Cam (got it from eBay): XM530_80X20_8M
with this firmware version: FW: V5.00.R02.00030678.10010.244500.0020000

As I am definitely not a Windows user and this cam only supports web ui access via Internet Explorer, I tried to set it up in my preferred Android IP Cam viewer TinyCam Pro by auto network detection ... and it popped off there as ONVIF device with anonymous authentication!!! That means everybody could access the onvif stream without the need of any authentication!!! No user, no password required!!! As it is not bearable at all to me to publish an ONVIF port without any authentication required to the internet for remote access to this camera, I would need a bit of help of more experienced folks with this cam:

Is there any known device at the market which is identical in construction? So I could choose such a model instead in my TinyCam app instead and try to access it via simple http. So I would not need a port forwarding to the ONVIF port and the security hole would only exist within my local network, but not outside of it, what would give me a better feeling at least.
Or even simpler - is there any way to make ONVIF access private? I have already searched all the cam's configuration interface, but I was not able to find a switch to get rid of anonymous onvif access... Maybe there's a trick to do it...? Maybe another firmware?
Would appreciate any help...
 

tehno31

n3wb
Joined
Jul 30, 2020
Messages
2
Reaction score
0
Location
Ukraina
aliexpress.ru/item/BESDER-H-265-PTZ-IP-Camera-30X-ZOOM-Waterproof-Hi3516E-Mini-Speed-Dome-Camera-Outdoor-IR/33038017769.html?spm=a2g0s.9042311.0.0.264d33edXwY1Ee&_ga=2.195917548.1770081044.1596106046-910272657.1596106046
Good afternoon. I bought such a camera
the increase and PTZ worked. Updated firmware stopped working PTZ increase.
Maybe who will help find the firmware at the moment is worth such a firmware V5.00.R02.00030678.10010.344500.0020000
2020-06-02 09:01:02
Habc065f589994d9dbc5e2389e77c8bc2u.jpg


He wrote to the seller a firmware General_IPC_HI3516EV200_85H30AI_S38.Nat.dss.OnvifS.HIK_V5.00.R02.20200102_all
But she does not want to establish writes a mistake.

I understand that the seller has a special firmware there is no PTZ module going around somehow. We need a special firmware.
 

imag

n3wb
Joined
Jun 7, 2020
Messages
7
Reaction score
3
Location
CZ
Hi,
I updated my camera 00030679.1 XM550_80X50 to General_IPC_XM550_80X50.Nat.dss.OnvifS.HIK_V5.00.R02.20200707_all.bin, but the PTZ stopped working.
When I want to install the old firmware version General_IPC_XM550_80X50.Nat.dss.OnvifS.HIK_V5.00.R02.20190730_all.bin, an update fail is displayed and the firmware is not installed.
Can anyone help me please?
 

Tinbum

Pulling my weight
Joined
Sep 5, 2017
Messages
446
Reaction score
126
Location
UK
Hi,
I updated my camera 00030679.1 XM550_80X50 to General_IPC_XM550_80X50.Nat.dss.OnvifS.HIK_V5.00.R02.20200707_all.bin, but the PTZ stopped working.
When I want to install the old firmware version General_IPC_XM550_80X50.Nat.dss.OnvifS.HIK_V5.00.R02.20190730_all.bin, an update fail is displayed and the firmware is not installed.
Can anyone help me please?
Is it XM550_80X50 or XM530_80X50?
 

Attachments

Tinbum

Pulling my weight
Joined
Sep 5, 2017
Messages
446
Reaction score
126
Location
UK
There are so many different versions of the firmware for cameras that all look the same, but Internally they have different PCB's.

I have some that seem to have a problem with the LEDs. When zoomed out all 8 are on when it should only be 4. You'd think it wouldn't matter but the power supplies don't like it and I'm sure the internal pcb's will fail prematurely due to overheating.
 

imag

n3wb
Joined
Jun 7, 2020
Messages
7
Reaction score
3
Location
CZ
There are so many different versions of the firmware for cameras that all look the same, but Internally they have different PCB's.

I have some that seem to have a problem with the LEDs. When zoomed out all 8 are on when it should only be 4. You'd think it wouldn't matter but the power supplies don't like it and I'm sure the internal pcb's will fail prematurely due to overheating.
I received the correct firmware from the camera manufacturer that worked, but I tried to install new versions from xiongmaitech.com. When you try to install a previous version, you receive an installation fail message.
 

Tinbum

Pulling my weight
Joined
Sep 5, 2017
Messages
446
Reaction score
126
Location
UK
I would just go back to the manufacturer and check thy have sent the correct one.
 

imag

n3wb
Joined
Jun 7, 2020
Messages
7
Reaction score
3
Location
CZ
I would just go back to the manufacturer and check thy have sent the correct one.
The manufacturer sent the correct, it worked. Newly downloaded firmware does not allow downgrade.
 

imag

n3wb
Joined
Jun 7, 2020
Messages
7
Reaction score
3
Location
CZ
send me the firmware that the seller gave you, I'll see what the reason is
This is not a problem. The problem is that I now have installed version from xiongmaitech.com (20200707) and I need to go back to the old version (20190903). I can already install the firmware from the camera manufacturer on the old version.
 

Attachments

Last edited:
Top