Hello Idrism2,
do you solved your Problem with your Firmware ?
I also made an Firmwareupgrade (Modell: NM4RT-20718EP) and now my PTZ is also not working.
Do you got the Firmware ?
Regards
PTZ fails after firmware update
- Thread starter Tinbum
- Start date
do you solved your Problem with your Firmware ?
I also made an Firmwareupgrade (Modell: NM4RT-20718EP) and now my PTZ is also not working.
Do you got the Firmware ?
Regards
Hi, I have this type of Chinese Cam (got it from eBay): XM530_80X20_8M
with this firmware version: FW: V5.00.R02.00030678.10010.244500.0020000
As I am definitely not a Windows user and this cam only supports web ui access via Internet Explorer, I tried to set it up in my preferred Android IP Cam viewer TinyCam Pro by auto network detection ... and it popped off there as ONVIF device with anonymous authentication!!! That means everybody could access the onvif stream without the need of any authentication!!! No user, no password required!!! As it is not bearable at all to me to publish an ONVIF port without any authentication required to the internet for remote access to this camera, I would need a bit of help of more experienced folks with this cam:
Is there any known device at the market which is identical in construction? So I could choose such a model instead in my TinyCam app instead and try to access it via simple http. So I would not need a port forwarding to the ONVIF port and the security hole would only exist within my local network, but not outside of it, what would give me a better feeling at least.
Or even simpler - is there any way to make ONVIF access private? I have already searched all the cam's configuration interface, but I was not able to find a switch to get rid of anonymous onvif access... Maybe there's a trick to do it...? Maybe another firmware?
Would appreciate any help...
with this firmware version: FW: V5.00.R02.00030678.10010.244500.0020000
As I am definitely not a Windows user and this cam only supports web ui access via Internet Explorer, I tried to set it up in my preferred Android IP Cam viewer TinyCam Pro by auto network detection ... and it popped off there as ONVIF device with anonymous authentication!!! That means everybody could access the onvif stream without the need of any authentication!!! No user, no password required!!! As it is not bearable at all to me to publish an ONVIF port without any authentication required to the internet for remote access to this camera, I would need a bit of help of more experienced folks with this cam:
Is there any known device at the market which is identical in construction? So I could choose such a model instead in my TinyCam app instead and try to access it via simple http. So I would not need a port forwarding to the ONVIF port and the security hole would only exist within my local network, but not outside of it, what would give me a better feeling at least.
Or even simpler - is there any way to make ONVIF access private? I have already searched all the cam's configuration interface, but I was not able to find a switch to get rid of anonymous onvif access... Maybe there's a trick to do it...? Maybe another firmware?
Would appreciate any help...
aliexpress.ru/item/BESDER-H-265-PTZ-IP-Camera-30X-ZOOM-Waterproof-Hi3516E-Mini-Speed-Dome-Camera-Outdoor-IR/33038017769.html?spm=a2g0s.9042311.0.0.264d33edXwY1Ee&_ga=2.195917548.1770081044.1596106046-910272657.1596106046
Good afternoon. I bought such a camera
the increase and PTZ worked. Updated firmware stopped working PTZ increase.
Maybe who will help find the firmware at the moment is worth such a firmware V5.00.R02.00030678.10010.344500.0020000
2020-06-02 09:01:02
He wrote to the seller a firmware General_IPC_HI3516EV200_85H30AI_S38.Nat.dss.OnvifS.HIK_V5.00.R02.20200102_all
But she does not want to establish writes a mistake.
I understand that the seller has a special firmware there is no PTZ module going around somehow. We need a special firmware.
Good afternoon. I bought such a camera
the increase and PTZ worked. Updated firmware stopped working PTZ increase.
Maybe who will help find the firmware at the moment is worth such a firmware V5.00.R02.00030678.10010.344500.0020000
2020-06-02 09:01:02
He wrote to the seller a firmware General_IPC_HI3516EV200_85H30AI_S38.Nat.dss.OnvifS.HIK_V5.00.R02.20200102_all
But she does not want to establish writes a mistake.
I understand that the seller has a special firmware there is no PTZ module going around somehow. We need a special firmware.
Hi,
I updated my camera 00030679.1 XM550_80X50 to General_IPC_XM550_80X50.Nat.dss.OnvifS.HIK_V5.00.R02.20200707_all.bin, but the PTZ stopped working.
When I want to install the old firmware version General_IPC_XM550_80X50.Nat.dss.OnvifS.HIK_V5.00.R02.20190730_all.bin, an update fail is displayed and the firmware is not installed.
Can anyone help me please?
I updated my camera 00030679.1 XM550_80X50 to General_IPC_XM550_80X50.Nat.dss.OnvifS.HIK_V5.00.R02.20200707_all.bin, but the PTZ stopped working.
When I want to install the old firmware version General_IPC_XM550_80X50.Nat.dss.OnvifS.HIK_V5.00.R02.20190730_all.bin, an update fail is displayed and the firmware is not installed.
Can anyone help me please?
I bought that camera and after update ptz stopped working. Now software version: V5.00R02.000559B0.10010040300.0020010
Please help.
Please help.
There are so many different versions of the firmware for cameras that all look the same, but Internally they have different PCB's.
I have some that seem to have a problem with the LEDs. When zoomed out all 8 are on when it should only be 4. You'd think it wouldn't matter but the power supplies don't like it and I'm sure the internal pcb's will fail prematurely due to overheating.
I have some that seem to have a problem with the LEDs. When zoomed out all 8 are on when it should only be 4. You'd think it wouldn't matter but the power supplies don't like it and I'm sure the internal pcb's will fail prematurely due to overheating.
I received the correct firmware from the camera manufacturer that worked, but I tried to install new versions from xiongmaitech.com. When you try to install a previous version, you receive an installation fail message.
The manufacturer sent the correct, it worked. Newly downloaded firmware does not allow downgrade.
This is not a problem. The problem is that I now have installed version from xiongmaitech.com (20200707) and I need to go back to the old version (20190903). I can already install the firmware from the camera manufacturer on the old version.
Last edited:
This firmware was successfully installed and I was able to revert to the manufacturer's version. PTZ works again. Thank you very much!!!!