Thank you, sadly didn't work for me.This works to meon model NZ4RN-34718
Thank you, sadly didn't work for me.This works to meon model NZ4RN-34718
Try from post 251;Your advice did not help, still is a red image.
Friends help with the firmware who can. Thanks in advancePlease help with the firmware for the ZY-PEZ40-SNY camera after the update, PTZ ZOOM control disappeared Avtofocus , version V5.00.R02.000589C9.10010.040200.0020000 platform HI3516EV300S38H50AI Thanks in advance!View attachment 96754the seller gives the firmware link but the firmware is not installed XMEye Wired PTZ firmware (ZY-PEZ40-SNY) - Google Drive
Привет!пробуй мне прислал продавец камераПривет! Я купил камеру видеонаблюдения на Aliexpress. После обновления прошивки камера перестала работать в режиме масштабирования, а четкость изображения не регулировалась. Версия устройства: XM530_R80x50-PQ_8M; Версия программного обеспечения: v5. 00. R02. 00030737.10010.349f17. 0000000; дата выхода прошивки - 2021.06.08.Продавец Aliexpress игнорирует запросы.
Thank you very much! I tried to install the firmware, but, unfortunately, it was never installed. Neither via icsee, nor via xmeye: (Привет!пробуй мне прислал продавец камераView attachment 98230
Maybe I need the previous firmware...Thank you very much! I tried to install the firmware, but, unfortunately, it was never installed. Neither via icsee, nor via xmeye: (
Dear John good eveningHello All,
I managed to get firmware for my camera and the PTZ function now works. File is attached.
Ich habe es geschafft, Firmware für meine Kamera zu bekommen und die PTZ-Funktion funktioniert jetzt. Datei ist angehängt.
John
Upgrade this firmwareHello,
I have similar issue, did auto-update via xmeye app and now PTZ and focus doesn't work.
Current firmware version is: V5.00.R02.00030679.10010.349b00.0020010
I don't know which version was installed previously
Cam version: XM530_80x50_8M
Cam model: NZR10X-52710
I've contacted seller on aliexpress and he sent me firmware file, but I'm unable to flash it.
I've tried with VMS software from Polyvision - it just fails with unknown error.
Also tried with web interface, it doesn't give errors, but I can see "Upgrade [Exception]" in logs.
Is there anything I'm missing in order to get successful upgrade?
Maybe the file they sent is wrong, could you please help me to find the correct file?
About the Cam NG4RT-53718-30X i have upgrade with the attached file and was successfullUpgrade this firmware
Dear Sir,Hallo Oleglevsha
Hallo Tinbum
Kamera funktionier jetzt,habe es mit call 96 auf Werkseinslellung zurückgesetzt.
nochmal 1000 dank!!!!!!!!!. für eure Hilfe.
Hello Oleglevsha
Hello Tinbum
Camera now, i.e. with call 96, it has reset to work saturation.
another 1000 thanks!!!!!!!!!. for your help.
Hi oleglevsha,explain what you are specifically interested in
also would like to know if there's any acrylic cover for these ptz'sHi oleglevsha,
Thank you for replying. I have this camera which was almost dead for 2 years due to covid and today i found your article and updated the software using one of the provided firmware here. now its back to life and ptz is working too but its too slow. how to increase decrease its speed. i am posting its version here.