Q-See Closing Doors Jan 31st 2021 No More Remote Viewing, Options to fix

RBurn

n3wb
Joined
Feb 18, 2021
Messages
16
Reaction score
9
Location
Calif
Hi @RBurn

I am basing my view of your actions on more posts each time .. and so far getting a confirmation of my assessment based on your continuing posts.

Certainly as a Civil Engineer you should appreciate the bigger picture of some of us not liking "Tofu-dreg projects" ...
I’m done here, thanks. Enjoy!
 

mat200

IPCT Contributor
Joined
Jan 17, 2017
Messages
13,649
Reaction score
22,741
FYI - example of the issues of threats due to exposure of IP cameras / Iot products on the internet, and this includes port forwarding

Unauthenticated Remote Code Execution (RCE) vulnerability in Hikvision IP camera/NVR firmware (CVE-2021-36260)



Thanks @watchful_ip excellent job.

Thanks @alastairstevenson @iTuneDVR @Securame @rawinek @cyrusbyte

1632086255299.png


1632086219015.png
 

canderson

n3wb
Joined
Apr 16, 2021
Messages
4
Reaction score
1
Location
San Diego, CA
I bought the Amcrest 1080n ProHD 16 Channel DVR for $90 and installed my Hard drive from the old Q-see DVR, all cameras run fine and I am back on Remote viewing. Problem solved.
 

TWC_21

n3wb
Joined
Oct 26, 2021
Messages
1
Reaction score
0
Location
Texas
It appears Q-See finally shut down their servers for P2P sharing. I just wanted to share what James Layer posted on the Q-See face book page. It will allow the apps to work only when connected to your home network. I'm researching more about what was mention above about doing a DNS service and then setting up a VPN to access for remote viewing. But here is a short term to view while on your home network not away.

James says: I was able to set up the QTview app on my computer to view cameras now that Qsee no longer supports the app viewing away from home. As long as you are home and on the same network as the NVR or DVR this should work. First, you will need to go into settings and find the IP address of your NVR or DVR. Once you have the IP address, go to Control Panel within the QTview app. Click on Device. Click on Add Device. click add, edit or Delete Device. Click on Add Device. At bottom part of screen where it says Start IP Address, enter the IP address of your NVR or DVR you located earlier. Then enter the admin password of your system and click apply. This worked for me.
NOW, if you want to get the app to work on your iPhone or IPad, open the QTview app. Tap on the three lines at top left hand corner of the app.Tap on Server List. Tap on the + symbol, top right hand corner of the app. Here you will enter your IP address of your NVR or DVR, where it says nickname, just type in whatever you want to call your camera system. At user, enter the user name for your system, could be admin or something else if you changed it. At password, enter the password of your system. Unless you changed it from the default, the default password should be 123456 then tap on Save. You should now be able to view your cameras on your home wi-if network through your phone or iPad.

This also works for the QC-View App: In the device manager it is the top right + sign to add and click camera. then wired devices then IP/Domain. Put your NVR's IP address and password and give it a name as well.
Do you happen to know where I can get Q-See QTView software for Windows? I have it installed on my old PC, but I would like to install it on my new one. I don't want to run an Android version in a PC emulation mode.
 

cubinche

n3wb
Joined
Oct 27, 2021
Messages
1
Reaction score
4
Location
33909
You clearly have a lot of time on your hands lol… enjoy!
-----
mat200 said:
FYI - if you are currently port forwarding, do expect to eventually be cyber hijacked .
RBurn said:
if you think they would be after you , your living in a dreamland.
mat200 said:
Hi @RBurn

Sounds similar to those who say:
"Why would cyber criminals call your grand mother.. she knows nothing about computers .. "

Clearly you've not been paying attention to the world of cyber attacks .. and thus I see you wish to denigrate those who know more than you on this topic.

Why does an attacker want to cyberhijack you?
1) because they can. ( cyber "joyrides" )
2) because your IP devices and internet connectivity is useful for them to attack bigger fish. ( stealing your car to commit crimes, or stealing your ID to commit crimes )
3) because even you, have something of value for them to steal.. ( your ID, your bank accounts, your email accounts, .. etc.. )
RBurn said:
I’m not sure how you come up with the word “denigrate” , look it up. My point is people spend to much time on things like this whereas the risk IMO as this is forwarding a port to a nvr and not a computer. Even with a vpn there are still dangers. If you have a lot of time on your hands and feel that having your nvr compromised is something you cannot live with then everyone owning Q-See nvr should go with a vpn or replace there equipment now as this equipment is no longer being supported or updated.

Take note on the following statements.
Can you get hacked through port forwarding? Yes. If you take security precautions, is it likely? Not really.
mat200 said:
Hi @RBurn

Your initial statement was: if you think they would be after you , your living in a dreamland.

That is clearly not the case, as cyber attacks are reaching in the homes of of those connected to the internet.

Yes, port forwarding and exposed services to all are a significant IT security issue.

NVR = a computer .. just not getting updated as frequently as a proper PC that is within the OS support window.

I say:

I am an MCSE (Microsoft Certified Systems Engineer) and a CCNP (Cisco Certified Networking Professional).

Countless people come to this forum depending on kind and generous help from others more able than they are, hoping for help to overcome their technological knowledge gap. I say 'thank you' to patient contributors like @mat200 for enlightening many of us (including me).

As someone whose business includes securing networks and their child nodes and applications, it's frustrating to see people like @RBurn, who know dangerously little and yet opine with authority in ways that can only serve to put others' security in deeply serious peril.

@RBurn shows his ignorance in several places, but especially in the self-evident, singular statement in which he quotes an article referenced out of context: "Can you get hacked through port forwarding? Yes. If you take security precautions, is it likely? Not really." Notice that he himself writes just two sentences earlier, "If you have a lot of time on your hands and feel that having your nvr compromised is something you cannot live with then everyone owning Q-See nvr should go with a vpn or replace there equipment now as this equipment is no longer being supported or updated."

Here's the proper context to the statement quoted from the article:

Step #1 in taking necessary security precautions is to maintain your systems properly updated and patched. This entire, lengthy thread is premised on a set of systems that not only haven't been supported since February 2021 - which necessarily means that the systems won't be maintained with necessary security patches and updates - but whose parent company is now defunct. By definition therefore, NO ONE CAN TAKE PROPER PRECAUTIONARY STEPS TO SECURE ANY Q-SEE SYSTEM ON THE OPEN INTERNET. The best one can do is to hide it behind a well-configured and updated router and firewall and as has been suggested ad nauseam in this thread by many: connect to it remotely through a well-configured VPN (Virtual Private Network).

Notice that even the article referenced by @RBurn doesn't say that systems using port forwarding can't be hacked - just that it's not likely. One reason is that viruses, malware, Trojans and the like are written by hackers first. Only after these coded predators are discovered (by having caused damage) is it that antidotes we call 'antivirus', 'security patches' and 'system updates' can be written. First comes the creation of the damaging worm or predatory piece of code, then comes the antidote. In the interim we usually see a whole lot of damage.

Many such predators are written specifically to do their damage months and even years after their infiltration into systems - specifically so they can propagate extensively to many thousands or even millions of machines and networks before they're discovered and an antidote can be written. In other words, the newest virus may already be living dormant and undetectable inside your computer without you even knowing it... just waiting for the clock to strike the time prescribed as written in code for it to do its damage - well after enough time has passed for it to infect thousands or even millions of systems and networks.

@RBurn is welcome to take his ignorant risk if he cares to. I strongly recommend to more sensible folks not to follow his ill-informed lead.

As an aside regarding network security: the hacker may not be interested in your cameras, but for sure he's interested in getting into your network. If you don't think that attempts are regularly being made to attack your networks, run Wireshark or some other network-sniffing, packet scanning tool and watch your jaw drop. There are easily hundreds and even thousands of such hacking attempts constantly attacking your network on any given day. I'm talking about your network - not just the network of the guy sitting next to you. That's why you should always properly configure, update and patch your routers, firewalls and computing systems.

While the hacker may not be interested in your cameras, he is interested in the weakest link inside your network. He can use that weakness to get inside your network and once inside, he can run for example, a Cisco 'cdp neighbors' command or similar to see other devices on the internal network segment. Once inside the network, from there - from within your router or computer or NVR for example - he can easily hop into whichever other device that's hosted on the network.

Let me scare all of you with real facts and especially you, @RBurn, because you really need it:

Once inside a node within your networked computer, a hacker can for example, install a silent keystroke logging app. Such apps are often light-weight, hidden from Windows' list of processes and not listed in the Programs directory - essentially hidden from you even as it operates. Its function? To record your keystrokes and their associated web sites as you're entering data (like when logging onto your bank account) and then sending lower-level network Layer 3 packets containing the sensitive information to remote servers.

People like @RBurn may be too stubborn to realize they were wrong all along. In this scenario I wouldn't be surprised to find such a person grilling his visiting niece or nephew, wondering which of them cleaned out his bank account after stealing his or her banking password. Hopefully the niece or nephew receives a just and profuse apology once the bank informs such stubborn folk that the crime originated from China, Russia, India, Nigeria or any number of other places where such hackers abound and which are too far removed from American authorities to be prosecuted and put where they belong: behind bars.
 

dhaval14

n3wb
Joined
Nov 19, 2021
Messages
1
Reaction score
1
Location
Detroit, MI
Hi all,
The original post was about Q-See going out of business and stopped remote view. Its been almost 10 months I been using remote view as per their latest guidance they launched in Jan 30, 2021. It was working fine. I was using DMSS app for Q-see camera as Q-see app stopped due to not doing latest update.
I have been using Ip/Domain, I used my router IP address, Port: 37777 and NVR username and Password.
I turned on DHCP in NVR too and DMZ in the router. But recently DMSS app says Login Timeout and I tried Q-see app, its say failed connection. I tried different port too. Also tried this guy but not working at all. Any help would appreciate it.

 

mat200

IPCT Contributor
Joined
Jan 17, 2017
Messages
13,649
Reaction score
22,741
Hi all,
The original post was about Q-See going out of business and stopped remote view. Its been almost 10 months I been using remote view as per their latest guidance they launched in Jan 30, 2021. It was working fine. I was using DMSS app for Q-see camera as Q-see app stopped due to not doing latest update.
I have been using Ip/Domain, I used my router IP address, Port: 37777 and NVR username and Password.
I turned on DHCP in NVR too and DMZ in the router. But recently DMSS app says Login Timeout and I tried Q-see app, its say failed connection. I tried different port too. Also tried this guy but not working at all. Any help would appreciate it.

Welcome and a big thanks for posting this @dhaval14
 

xplorer

Pulling my weight
Joined
Jul 6, 2020
Messages
80
Reaction score
130
Location
Michigan
fwiw - there probably was a way to do remote view without dumping the DVR you had...

basically
1) if you can view on LAN
2) block port forwarding for the DVR
3) setup VPN server on router or other LAN device
4) install VPN app on mobile device ..
5) VPN into your LAN ..
What he said,

I use QT view and openvpn for remote access and it works great.

No P2P no open ports no third party software and no hardware to change.

Didn't bother me a bit when they went belly up, I had no interruption of service. Heck I wouldn't have known they went out of business had I not read about it here!

The thing will eventually age out or die but no need to replace a Qsee DVR just because P2P no longer works, shouldn't be using it anyway.
 
Last edited:

jl266

n3wb
Joined
Dec 1, 2021
Messages
2
Reaction score
2
Location
New York
I've been using this software for ages now but for some reason I unplugged the NVR and all the ethernet cables (was planning on swapping out the harddrive, but then didn't yet). Plugged everything back in exactly how it was and now I can still connect to the NVR but for some reason it's not recognizing the cameras. Any ideas? I've rebooted the router, the switch, the NVR, tried everything I know so far... still not recognizing the cameras even though they're plugged directly into the NVR.
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,259
Reaction score
23,714
Location
HONGKONG
If your NVR is a POE one check the POE port really offer power, just use your hand to hide the lens, IR will be on after seconds.
If a NONE POE NVR, then check the poe switch if all ok.
Looks like more issues about your power.
 

jl266

n3wb
Joined
Dec 1, 2021
Messages
2
Reaction score
2
Location
New York
If your NVR is a POE one check the POE port really offer power, just use your hand to hide the lens, IR will be on after seconds.
If a NONE POE NVR, then check the poe switch if all ok.
Looks like more issues about your power.
Thanks - I just tried this though and the camera is "flicking" on the IR, so it's definitely getting power. When I go to open the cameras though it just says "Searching Video" and then eventually "search stream timeout". Really very strange. I'm about to order a new system because I can't be "down" for too long and I've checked all of the settings, I haven't changed anything. The only thing I can think of is if something got reset when it was without power for 5-10 minutes.
 

avspin

Getting the hang of it
Joined
Jan 18, 2021
Messages
111
Reaction score
64
Location
Reno, NV
Did you do a proper shut down by turning off the NVR within the software not just unplugging? I had one fry from a power outage this way before adding a ups. Also, let the nvr power up for a few minutes before plugging cameras in, and then one at time waiting about 10 minutes in-between.
 
Last edited:

Mike4030

Young grasshopper
Joined
Oct 24, 2015
Messages
93
Reaction score
21
It’s possible the cameras need to be plugged into specific port on nvr. Exactly how they were before. If you can remember which camera went to what port.
 

mat200

IPCT Contributor
Joined
Jan 17, 2017
Messages
13,649
Reaction score
22,741
I've been using this software for ages now but for some reason I unplugged the NVR and all the ethernet cables (was planning on swapping out the harddrive, but then didn't yet). Plugged everything back in exactly how it was and now I can still connect to the NVR but for some reason it's not recognizing the cameras. Any ideas? I've rebooted the router, the switch, the NVR, tried everything I know so far... still not recognizing the cameras even though they're plugged directly into the NVR.
Hi @jl266

I am guessing there is either
1) an IP issue
2) user / password sync issue
3) port issue

If you have a poe switch, you can connect the camera to the switch and a laptop / pc and scan for IP number the camera is set to.
( look for threads on that topic .. remember you need some basic IP address / subnet knowledge here .. Dahua has a config tool to help also .. you can also download and use SmartPSS on a laptop - I am assuming that you have a Dahua OEM kit .. )
 
Joined
Dec 2, 2021
Messages
1
Reaction score
0
Location
Winston Salem NC
I’m a newbie to ALL of this so pardon my ignorance, I just inherited a home with an older Q see system which I believe has the DVR not the NVR. We are trying to figure out how to set up to remote view but I am lost with all the tech talk about VPN and port forwarding and all of that. I was thinking about a new router with VPN but not sure how to set that up on a mobile device to view from on the road (I’m an OTR trucker) to be able to keep an eye on my new home
 

xplorer

Pulling my weight
Joined
Jul 6, 2020
Messages
80
Reaction score
130
Location
Michigan
I’m a newbie to ALL of this so pardon my ignorance, I just inherited a home with an older Q see system which I believe has the DVR not the NVR. We are trying to figure out how to set up to remote view but I am lost with all the tech talk about VPN and port forwarding and all of that. I was thinking about a new router with VPN but not sure how to set that up on a mobile device to view from on the road (I’m an OTR trucker) to be able to keep an eye on my new home
Start here,

 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,259
Reaction score
23,714
Location
HONGKONG
Thanks - I just tried this though and the camera is "flicking" on the IR, so it's definitely getting power. When I go to open the cameras though it just says "Searching Video" and then eventually "search stream timeout". Really very strange. I'm about to order a new system because I can't be "down" for too long and I've checked all of the settings, I haven't changed anything. The only thing I can think of is if something got reset when it was without power for 5-10 minutes.
Then make a factory default on the nvr and then re-add those cams again.
 

elitef

Getting the hang of it
Joined
May 25, 2015
Messages
153
Reaction score
32
Hey everyone,

SOOO... I found a cam in my garage which I bought a whilllle back. Its the Q-See cube came which advertises itself as a 4K.. Fine..
It looks like the hikvision cube cams which I have plenty of but those are 2MP and I bought this one back in the day to see if I can upgrade but never got around to opening the box.

I tried hooking it up, the Q-See app does not work as it displayed a Network Error which I see is common for all, so not surprised.
I continued to use the Dahua Config Tool and it pulled up the cam without issue and found the IP address that way (but I already had it from my Ubiquiti setup), but it was able to give me the port number as well.

Unfortunately, due to the lack of an online gui, it was hard to figure out how to do so until the Dahua Config Tool. With it, I was able to update the time, change the default password, and adjust the video specs, etc. so major plus for that program.

The dislikes of the Q-See 4k Cube came are:
  • No POE - This is a MAJOR issue for me due to the cameras being mounted on the ceiling and I was hoping to replace the 2MP with the 4K one
  • No mounting point on the back of the camera, only on the stand itself, which is not great for me.
  • Though the camera is supposed to be 2-way talk, but I cannot figure out what Dahua model of the camera to use in order to get the MICROPHONE to work on my phone to communicate back to the camera.

If anyone has any ideas what model the Q-See 4k Cube is in Dahua models, that would be great.
 

jcy110

n3wb
Joined
Jan 6, 2022
Messages
4
Reaction score
0
Location
NJ
Hello All,
This post is about to generate 1000's of views. Many people are about to find out their Q-See systems will stop P2P sharing and will not be able to remote view because the vendor is going out of business tomorrow. Q-See has recommended to use remote access via DMZ and enable DHCP. Basically, turning off your router’s firewall and allowing an outside connection directly to your NVR. (directions found on their web site). However, everything I’ve read about it states this could open your network up to hacker attacks. I want to use this as a brain storming area and pick people’s knowledge. (Maybe port forwarding and how to do it). Please reframe from “you shouldn’t have bought Q-See in the first place (Yes Yes I know).

Option 1: Do the DMZ and risk it.

Option 2: So from what I have gather is that many of their systems were made by Dahua and should be easy to buy a Dahua NVR of similar specs and use their software and their web/phone apps to remote view. (Onvif compliant) For the most part plug and go.

Option 3: Buy or build a windows based computer/server for use as a NVR and buy a POE switch and install Blue Iris software to manage it. (most likely the most powerful and best way to achieve best recording) But uses more power than a standalone NVR?

For me I’m running a QC826 16 channel NVR (total record data max of 320MBPS) (4 full resolution channels and the rest up to 1080P) I have 3 different PTZ cameras and many 4K camera’s IP cameras and wireless cameras. Some direct connect and others running through google mesh system. I installed it myself and self-taught through trial and error. I’m looking at two different Dahua NVR models :
(Both 16 channels below)
N42B3P
nvr5216/5232-16p-4ks2e

I guess people will want to know about cost factor. It will depend on what others have already and what they want to do. I’m leaning toward a new/used Dahua NVR ($300 to $600) using the existing two hard drives in my current NVR. But if you have a computer you can convert, Blue Iris may work better.

Just to be clear all Q-see’s NVR's will still keep recording to the NVR and will be unaffected. Just remote viewing will be affected. Sorry for my typo’s just wanted to get this out and going

Alex

My Q-see phone app and outside access still works after setting up a NoIP.com DDNS account...... it stopped connecting when the q-see DDNS server shut down.
 
Top