Search results

Problem: Dahua Switch is not being recognized by Dahua NVR. I have tried plugging the Dahua PFS4226 switch uplink ethernet cord into the second NVR RJ45 uplink receptacle with no success but when plugging the Dahua switch uplink ethernet cord into the Cisco 110 Series switch the NVR connects to...

I was running a Dahua NVR5216 but due to its limited bandwidth, I upgraded to a NVR608H-32-XI using a Dahua switch PFS4226-24ET-240 plugged into the NVR RJ45 port and an ePoE switch (EmpireTech 10-Port Unmanaged Switch with 8-Port ePoE) plugged into the second RJ45 port of the PFS4226-24ET-240...

I am trying to have the PTZs continue to track a person even after they have stopped moving for more than 10 seconds. I find that when a person stops moving for 5 to 10 seconds the PTZ will go back to its original Preset settings and then when the person moves (if they're in the initial Preset...

I ordered the following items from Andy and need advice on how to properly connect the 2 switches to the NVR and the NVR to my LAN switch (Cisco CBS 110 16T) to maximize performance (bandwidth). NVR608H-32-XI (Network Ports: 2 (10/100/1000/2500 Mbps Ethernet port, RJ-45)) PFS4226-24ET-240...

The issue: very choppy video, especially when PTZ moves and zooms in, on the camera's GUI clock the time skips 2-5 seconds forward as well. Details: Comparing the two SD8C845FG PTZs at different locations on the property, the first (location 8) operates at 10,250 kbps while the second...

The camera is a SD6AL433XA-HNR. Recently I have had trouble with both of them so I did a default reset via the camera GUI. I set the schedule for day and night in the GUI Profile Management under Settings/Camera/Conditions. All other Conditions change when Night or Day is selected but the IR...

I run eight (8) 5241s and I have one that is running between 60,000 to 80,000 kbps and it is set up exactly like the others that average 9,000 kbps on Main Stream, any ideas as to why? Thank you for your help.

Andy hooked me up with a great PTZ a couple of weeks ago and with the new interface with the camera the options are pretty cool. The one issue I'm having is how to find and review the Face Detections. Interesting things is it sends them to my DMSS phone app and I can see them on there but when...

I am looking at running 700-feet of Cat 6 direct burial cable through the woods from one ePoE switch located at the office where the NVR is located and down to the second location into a PoE switch where I have (2) 4MP cameras located. I have tried 2 different sets of Ubiquiti Nanostations M5...

I have 9 of these cameras used as spotter cams for the PTZ's and I noticed one of them about every 2 to 4 days will lose its focus when going from night to day time in the profile management schedule. In the camera, under Conditions, Focus & Zoom, I have Day set as "Semi-Auto" as well as Night...

I am trying to do some testing of a Nano Station and in order to make sure it is working correctly I am trying to be able to access the camera's GUI directly with a laptop. I followed the directions and set the laptop's IP Address to static 192.168.1.200 as the instructions show, turn off wifi...

This afternoon if all works out and I make it home, I will have the pleasure of hooking up my PTZ with your help. My question revolves around setting up the Nanostation as described in the title of this post. The below is a drawing of what I think would be correct for the "Client" located at...

I was lucky and found IPCamTalk and was able to spend the time to read and learn. One of the first things I learned was Andy is the guy that could hook you up on the latest technology quickly and affordably. The dilemma I now faced was what cameras and NVR would be used for the unusual...

Does anyone have an idea as to what my tracking issues are, the video shows the person being captured using Deep IVS Tripwire but the PTZ then loses the target and begins searching for it and then getting lost before returning to the Preset. Also, the max tracking time I can get is 15 seconds...

Thank you for taking the time to read this post. I am a Newbie and in a very rural location with no man-made light, only moon and stars which due to weather only come out 5 months of the year. The 2 PTZ's need to cover up to 500 feet away and the other 2 PTZ's need to cover up to 300 feet...