Search results

I have one old hikvision DS-2CD2032-I, it's recording in blue iris but somehow any motion is not being triggered. I tried to check the settings on the camera and BI, but haven't been able to find the root cause. Thanks.

The motion detection/alerts suddenly not triggered for my cameras in BI. I haven't made any changes. I'm really puzzled and not sure how to fix this issue. I'm running codeprojects AI. I've done the following steps: 1)Reboot BI, BI Machine and cameras 2)On the latest stable critical update...

I need some quick help before leaving. I just noticed that BI is not recording suddenly for some cameras and for some unknown reason. It was recording for a full month before old recordings got deleted. The recording across the cameras are not consistent, some days the recording was skipped. All...

I have these old LaView cameras which I upgraded to Hikvision's firmaware. Even I downloaded and installed the plug in via the link, the live view still can't be displayed. Any suggestion on how to fix this? Thanks.

BI has stopped recording, I don't see the red dots on each camera. I think it's due to the disk space is full? Here is the setting, I thought it should start deleting after reaching 3600GB in the D drive?

I'm using codeproject AI for my Dahua's cameras. It detects vehicles but somehow not detecting person. Any setting that I might have missed? Thanks.

I bought an used HP EliteDesk 800 G4 SFF with Intel i5-8600 CPU. I installed 16GB Ram and noticed that the CPU has been running at 100% capacity. I'm running only 6 cameras. Trying to figure out how to optimize the system so it doesn't run at 100 % capacity. A few times the BI has crashed too...

Hi, is this the correct way to put two HDD in the Optiplex Elitedesk? Only small gap to put both power and SATA cables to both HDD.

Hi, has anyone run the IPC-Color4K-T180 without the LEDs at night? There's no IR for this camera, right? I just set mine up and still playing with the settings.

Can I mount the P137 upside down with the hole on the top? How to cover the hole on the top after feeding the CAT5e? With duct seal or silicone? I'm going to mount it on fascia board and my CAT5e can only be fed thru the top.

This is my front porch camera(T5442T-ZE). Without the porch light, and just using the IR, the quality is much better. What should I do in this situation? The porch light is needed else it's too dark by the front porch. Can I force the IR to turn on at certain time?

I haven't worked with turret camera and junction box before. I have some questions. 1) Can I install the junction box upside down instead of according to the top sign? 2) what can I use to seal the hole where the CAT5e is going thru? 3) does the camera installation looked correct ? Thanks.

I'm selling my LaView LV-N9808C8E 8 Ch. Built-in POE NVR, it comes with a 3 TB WD Purple HDD. I'm the original owner and bought them brand new. The only reason I'm selling is because I upgraded my system, everything is still working as expected and in good condition. I used them in my living...

I thought I could connect two together but somehow it's not working for me. House: Cisco managed POE switch, but I use it as default settings, no configuration. Garage: TP link unmanaged POE+ switch So, I ran CAT5e from Cisco switch to TP Link, then another CAT5e from TP link to IPCam...

I want to install IPC-Color4K-T180 + junction box at the fascia board. I was told by Andy that they will weigh about 3.5lbs, is this too heavy for the fascia board?

I just viewed some of the blue iris video playbacks. All of them have the trailing motion for moving objects at the beginning of the clip. What settings I have to change to correct this?

New to blue iris. If I want to do continuous recording on blue iris and delete the recordings after every 14 days, is this the correct setting? Or there are other settings that I have to configure? Thanks.

I'm still new to using Blue Iris. I view my cameras via VPN connection. Somehow, I noticed the UI3 is slow to load the views of the cameras (only 4), same as when I switch among the cameras. Is this normal or anything else I can do the improve the experience? Will it load faster in the blue Iris...

I just set up the OpenVPN on my ASUS router, via stock fimrware. I also set up the DDNS on the router. I exported the config file to my Android phone. Everytime it's timing out and not able to connect successfully. I changed the passwords several times so this is not an issue. Not sure what else...

I bought an used 24 ports Cisco 3560V2. It seems to be working ok but the fan is very loud. I'm wondering if I can use the following to quiet the blower fan? https://www.amazon.com/Noctua-NA-SRC10-Accessory-Low-Noise-Adaptors/dp/B00KG3KELQ Thanks.

The above is a rough sketch of my house and surroundings. I currently have 5 X 2MP Laview, Hikvision cameras and a NVR, I already bought a separate pc, will set up Blue IRIS and get a few more 4 MP cameras. No street lamps on my street, so good night vision is needed. I'm also having hard time...

I just bought an used 24 ports Cisco 3560V2 from Ebay. I'm planning to set up VLAN instead of using dual NICs on the BI machine. Any pointers on how to achieve this? Just want to make sure the cameras have no access to internet. Thanks.

I have no internet connection in my detached garage. I'm just wondering if I set up a POE switch, old NVR, cables and the IP cams will work?

Hi, I've decided to build a Blue Iris computer to replace my existing NVR and upgrade the cameras (plan to have about 8). Thanks for the suggestion, I bought an used HP Elitedesk 800 G4 (i5-8600), it doesn't come with OS and HDD. I have the following questions: 1) For storage, should I go with...

Hello, I bought LaView LV-KN988P84A4 8 Channel NVR with 4 1080P cameras about 7 yrs ago. The cameras are working fine but the night vision is lacking. I'm looking for suggestions. If I want to keep the same NVR and just upgrade the cameras, what brands and models of cameras will work with this...

Hello, I bought LaView LV-KN988P84A4 8 Channel NVR with 4 1080P cameras about 7 yrs ago. The cameras are working fine but the night vision is lacking. I'm looking for suggestions. If I want to keep the same NVR and just upgrade the cameras, what brands and models of cameras will work with...

Hello, I recently bought LV-N9808C8E and four LV-PB932F4 cameras. After reading some threads on this forum, I was planning to flash the NVR to hikvision DS-7608NI-E2/8P 3.3.6 firmware and the camera to Hikvision DS-2CD2x10,2x20,2x 5.3.0. firmware. I already completed flashing the laview...

Hello, I have a chinese version of DS-2CD2032-I with V5.1.0 build 131202 firmware. I would like to know if it's worth the hassle to upgrade the firmware to latest version, what are the versions available for this unit? What's the downside of having the v5.1? I also recently bought the laview...