First of all, thanks for reading this thread.
Things started by Im getting thousands of useless notification by motion detection since my cameras are not capable to do AI stuffs and few days ago I browse on reddit saying Synology Surveillance Station can do some AI work to analyze the image and...
I have 16 DVR's (not NVR's) in SmartPSS. We recently changed our network configuration and therefore each DVR was assigned a new (static) ip address. I add each one either with Manual Add (by entering ip address, port, UN/PW) or by using AutoSearch. Either way, all the DVR's show up in the...
I recently bought an 8ch nvr from tp link and i have installed an hard drive when i connect my nvr to poe to an ip camera it doesn’t show any cameras
I have even connected to an working setup but still it doest show ip but when i connect to internet the lan port transmit data and internet...
Hi,
I have 8 IP cameras installed. My previous NVR that the cameras were connected to is not working anymore. So I bought a new NVR.
I have set it all up, but my cameras are not online. All the network cables are connected to the NVR. I see all the cameras listed, but offline.
And when I use a...
Hi All,
I have been mucking around with Wifi cameras for years now, trying to get things just right.
Finally i have found some WiFi cams that seem to work. Set up with the YCC365 app and able to view on iSpy pc software.
I do have a couple of problems that I am hoping someone here may know the...
Hi all
I’m new here! I’m having a issue with my SANNCE NVR POE CAMERA
they keep saying offline no configuration and sometimes switch on and off when ever they want.
it’s got to do with the IP address with I mess with it say 192.168.0.100 it turns off one cameraand display another camera...
In order to use the Blue Iris mobile app, I'm planning to use my PC as a server to store and access IP camera footage. I have my PC's LAN internal IP address: 192.168.x.x:x, (including port), but I don't know that IP address (and port)'s username and password. I never needed it until trying...
Hi there, i have a problem, I connect Dahua to dc power and also my Ip Villa with ethernet cable to my laptop, then i change ipv4 to 192.168.178.20 because my range is 192.168.178..., than when i go to a browser, i cant access to my Dahua ip villa outdoor station, its only loading, where is the...
I have come across an AXIS Q6055-e from an online purchase and can't figure it out. I have never used a "POE" device but from what I can tell I need a "POE injector" so I got the 30W one and used standard cat5 patch cable from home router to injector and from that to the AXIS camera. I believe...
Hi all,
If anyone could assist me on this issue will be much appreciated.
situation
cable from camera to Rack side ( aprox 120 meters) but it has separate power source nearby the camera, when connecting directly to the laptop its working and pinging without even 1 drop out.
but when i connect...
I am considering a Blue Iris solution for my new home when it's built. I haven't used any CCTV systems before.
I know you can get purpose-built NVR's that have their brand of cameras. From what I can gather, each camera can be connected to via its IP address and from there various...
Hello,
I have 3 cameras, which worked perfect with Smart PSS, but from when I changed my internet provider the Smart PSS does not work any more. Would anyone can guide me how to run it again, please?
just need to mention my internet IP and internet router has been changed.
Much appreciated in...
If anyone can help me I would be most appreciated.
I have 2 x DS-2CD2232-I5 I was using with Synology Surveillance Station happily for the last 3 years. Then someone found my cameras and was repeatedly hacking them. They are grey imports and cannot be upgraded. I could not shutdown the ports...
Hi everyone!
My question is about an issue that I hope has been already solved. I just want to access my wifi ringbell not only from my app on the phone but also from another computer, a desktop or anytihng else that is connected to the web. I don't know if this thread had already been...
hi, i have a wifi ip cam installed on the outside of my property which i gave a password consisting of 8 characters. i then got a new router hub from my isp and activated it but it requires a 10 character password to access it.
i should have accessed and changed the camera password before i...
I recently replaced an 8 port NVR with a 16 and added 6 more cameras. Disconnected old nvr and hooked all of the previous cameras and new cameras. Only the new cameras are now showing up with the exception of one previous camera but the POE is recognizing all the cameras. I was told by tech...
I am not techno challenged, and I desperately need to upgrade my surveillance system. I don't want to break the bank but I don't want junk either. I have been reading too much and over researching, please help
Hi!
I have an LTS Camera, specifically the: PTZIP762X20IR. When i trying to made changes like change the ip or change the name it seems like it works... but when the camera is off or reset, does not save the changes and restore it to default... this happen with both sadp tool and browser camera...
Hi!
I have an LTS Camera, specifically the: PTZIP762X20IR. When i trying to made changes like change the ip or change the name it seems like it works... but when the camera is off or reset, does not save the changes and restore it to default... this happen with both sadp tool and browser camera...
I have a "Fing" app on my phone and it's real handy for viewing all my devices and their respective IP addresses on my various different LANs. However, what I'm not sure about is if there is a separate and unique IP address other than the default Gateway address for the Modem when it is built...
hi, recently i installed 100 hik vison Ip cam along with 3 hik vision NVR and 8 TP link 16 port switchers. my ip range given from 192.168.1.100 - 19.168.1.210. along this network 20 computers also been connected to this same network with the ip range of 192.168.1.220 on words. the entire network...
Hi All,
I was on my router and noticed a bunch of traffic on my cameras IP port adddress, I am not sure if this normal or not so I will post parts of the log. My camera is hosted via no-ip.com for outside password access viewing, so wondering if someone is trying to bot scan or something else...
I have/had 6 Qsee Branded QCN7001B 3.1MP "270P" IP cameras, directly connected to a POE switch and recording to blue iris.
Last week, I noticed the occasional "camera offline" but they normally would come back up the next day. Well Sunday morning I went to check on things and... 5/6 cameras...
I've currently got my cctv system set up on hikvision's old ddns service (hiddns).
So I've got a url like:
DDNS
Which takes me to a 302 redirect page to my ip:hikvision port.
QUESTION:
Is there a URL I can use from hiddns to get just my IP address.
I want to find my dynamic IP address and...
I'm setting up the Laview system. When no cameras are plugged in and the system reboots, I can access the NVR through a local computer browser. When I plug one or more cameras in, there appears to be an IP address conflict and nothing shows through the browser plugin.
Also after plugging a...
Hello,
I just have added a hikvision 2cd2 version camera to my collection. This is the first one I use on wifi without a cable.
The wifi connection works just fine (range indicator arround 90%) the only problem is it keeps changing random the ip adress afther a couple off days. The only way...
I recently bought an "old" NC601 IP CAM for really cheep on ebay (Specs: NC601 - IP Network Camera Technical Specifications). Now im wondering how to add it into my existing CCTV-Network (The other Cams are new models, streaming in MJPG / P2P).
I tried to add it using its IP address and Port...
Hi All,
I recently bought some Hikvision outdoor cameras from some guy on Craigslist. I connected one on my POE router to set it up and my Router is not giving it an IP address. My Gateway IP is 192.168.1.1 with a 255.255.255.0 subnet mask. And in the manual, it says the default IP of the...