ip cam

  1. M

    File size on files on IP cam recordings?

    Have one Synology server and a pair of IP cameras. Reolink and Foscam IP camera starts when it comes motion before cameras. Why are all recorded files between 11mb to 25mb. Why are not the files bigger, in one file? Duration from 15sec to 1min. Why are they not in a file / size? How to get in...
    • Mr.rs4
    • Thread
    • file size foscam ip cam reolink surveillance synology
    • Replies: 2
    • Forum: Windows
  2. H

    IP poe cameras with cat 3 wire

    ok , here is the question. Rather than run another cat5e cable to my attic which will be a pain, i would lke to utilize an existing cat 3 cable. The camera is an older hcm-531 poe (802.3af) low res 640x480 ptz. The cable run is 150 feet. I thought I would just hook uo the 3 pairs into an RJ45...
  3. D

    ACTi camera starts flashing at night, but records fine during the day

    Hi everyone: Let me start off by saying that my knowledge of IP cameras is quite limited. So please bear with me. Let me explain what happened. At our facility we've recently installed this IP camera. After about 6 months in, I started noticing that the camera was cycling through bright and...
    • dcd2018
    • Thread
    • acti flashing ip cam night video
    • Replies: 7
    • Forum: IP Cameras
  4. S

    Adding an IP cam to DS-7204HUHI-K1/P

    Hello; Recently picked up the HikVision DS-7204HUHI-K1/P DVR, plan to remove older CVBS camera's and install HD-Turbo over the RG6/59 cables. I've read that this 4ch DVR is capable of actually linking up with 1 IP camera. Can you please clarify if its either 4CH HD-TURBO + 1 IP cam (total 5ch)...
  5. Jonel

    Hikvision Two NVR in one Camera

    Hello I have two Hikvission NVR one NVR has 20 ip cameras and one has only 4... NVR(20 cameras) - 1 tb almost full NVR(4 cameras) - 2 tb but the problem is that only one NVR(20 cameras) is in the main server which is used for surveillance.. My question is can I put my camera in the two NVR ...
  6. M

    Which IP Cam for my Project?

    Hello, I've searched a lot for IP Cams with an API/SDK, but I'm not sure which camera fit's best for my project. AXIS? Instar? Vivotek? LevelOne? Other? I would be very thankful, if someone can recommend a camera for my requirements. I'm very unsure... Requirements: Good WEB SDK/API to...
    • mcbain3222
    • Thread
    • api ftp hdmi ip cam micin microphone mp4 poe sdk smb
    • Replies: 4
    • Forum: IP Cameras
  7. M

    HIkvision works on SADP and not able to open any browser (‏Pictures)

    Hello sir I hope you help me, As title says I installed software and able to see on SADP, it wont open anything in browsers. I tried wither Chrome, Mozzila, IE , Opera and iVMS-4200 Client . HIKVISION DS-2CD2T42WD-I5 This is some pictures:
    • maryzy
    • Thread
    • browser hikvision hikvision ds-2cd2t42wd-i5 ip cam ivms sadp
    • Replies: 10
    • Forum: Hikvision
  8. V

    "wifi camera" - IP or not?

    Greetings. I'm looking at this "wifi camera" on ebay 4K Hidden WIFI Camera Spy Cam DIY Full HD 1080P Security Camera Motion Detector | eBay It is offered by many sellers - just put "4k DIY wifi camera" in the search form. The chipset is NOVATEK NT96660. I looked it up and can see that it comes...
    • veert
    • Thread
    • blue iris ip cam wifi
    • Replies: 8
    • Forum: IP Cameras
  9. R

    Problems configuring stunnel

    I figured out how to configure stunnel to work with an IP camera, so I figured I'd share in the hopes it saves someone some time: [IP-Cam-Port-18555] accept = IP ADDRESS OF MACHINE:18555 connect = IP ADDRESS OF CAMERA:18555 cert = C:\Program Files\stunnel\config\stunnel.pem CAfile = C:\Program...
  10. L

    use hikvision indoor station as web cam?

    hello good ppl, ive got a [DS KH8301-WT - fw: 1.4.70 build 170222], when using the ivms mobile app, i can hear audio from the indoor station - is there a way to use the built in camera also? tia
    • lookisme
    • Thread
    • audio camera configuration hack ip camera hikvision ip hikvisiion indoor station ip cam security
    • Replies: 0
    • Forum: Hikvision
  11. E

    Sricam sp012 motion detection on iphone app

    Hello everyone, i have some issue ,as my topic title says. I have a SRICAM SP012, it works well. I link my ip cam to my iphone application (sricam official application) , i activate push notification and motion detection and it works but around 30 minuts, because after some time i doesn't...
  12. Kibul

    Send motion alarm emails only when alarm input is on?

    Is is possible to set Hikvision IP cam to send motion alarm emails only when alarm input is on? My IP cam has alarm I/O. I would like to wire it to alarm system so the cam only sends motion trigerred emails when the system is armed. It sounds logically and simple, but i can see no option like...
    • Kibul
    • Thread
    • alarm input email hikvision ip cam
    • Replies: 4
    • Forum: Hikvision
  13. Prinler

    Newb question ~ Why do you put SD cards in IP cameras?

    Yeah, I know.... noobie. So I see these cameras all have SD card slots. They use it for edge recording but even that im feeling a bit daft after reading a few articles. Doesn't the NVR - in my case blue iris - record all of the video? Prinler
    • Prinler
    • Thread
    • ip cam noob questions sd card sdcard why sd cards
    • Replies: 14
    • Forum: Chit-Chat
  14. R

    Qsee/Dahua Multiple Failure?

    I have/had 6 Qsee Branded QCN7001B 3.1MP "270P" IP cameras, directly connected to a POE switch and recording to blue iris. Last week, I noticed the occasional "camera offline" but they normally would come back up the next day. Well Sunday morning I went to check on things and... 5/6 cameras...
    • RAGGEDREBEL92
    • Thread
    • broken dahua failed help ip address ip cam ip cam problem qsee troubleshooting
    • Replies: 2
    • Forum: Dahua
  15. The_Tunisian_One

    DAHUA IP getting PTZ coordinates

    Hello , I'm a Newbie I just want to know how can I get PTZ coordinates like : P:230° , T: 45° , Z: x8 instantly with distant access from a PC. I just figure out how to connect with the telnet protocol to the camera. But I don't know if it help. just want using the information in an external...
  16. T

    Multiple locations under one centralized system

    Was wondering if you kind folk here at the forums know a good resource for a newbie looking to help a business with a certain type of IP camera setup. Currently we're looking to revamp our camera system both on the device and camera side (we use Synology which is a jack of all trades NAS system...
  17. M

    IP Cam I need the IP

    Hey there, we have two IP Cams. How can I Setup the Cams ? THX in advance
    • mrr
    • Thread
    • ip cam
    • Replies: 17
    • Forum: Dahua
  18. C

    Why does no one set up their IP Cameras in this fashion?

    I am currently trying to set up some Dahua cameras using just a Laptop+Blue Iris connected to a POE Switch which is then connected to all the cameras (no router involved). Essentially, I am trying emulate an off the shelf NVR, where everything pertaining to video surveillance happens in its own...
    • ctbear
    • Thread
    • blue iris ip cam network no router poe switch router
    • Replies: 6
    • Forum: Blue Iris
  19. V

    Recomendation needed for camera hardware under $200 !!!!

    Hi, I am currently working on my centrally connected Smart-Home project. The is based on automating the full house with cloud machine learning algorithms & voice controlled AI. For the project I need IP cameras installed in all rooms & outside the house. Their task would be to be to send the...
    • vatsa13
    • Thread
    • ip cam ip camera system smart tracking
    • Replies: 2
    • Forum: IP Cameras
  20. The Sicilian

    Microseven M7B77 best ip cam so far

    I've been searching for years now and finally found a solid, reliable, self contained ip cam and sw system. the man who makes these also designed the sw client that works flawlessly so far for me. The cam I have is the 1080p model, feel free to look it up on their website microseven.com. I'm...
  21. R

    Configure Wanscam to send photos

    Hello Everybody! I'm new to the IP camera world and quite fascinated of what you can actually do. So I got my first Wanscam set (3x HW0041, 1x HW0042 and 1x HW0038). They work great and I use the app (E-view7) to monitor them all. My first question is if there is any way to configure (using...
Top Bottom