set

  1. Chust

    Change frame rate at a specific time in bi?

    I use d2d for recording. During the day I set my cams to 15fps in the camera software. I set bi recording fps to 20 due to blur/streaking/pausing if set to 15fps... Now at night the cams switch to 7.5fps in the cameras software. I set bi recording fps to 10 due to blur/streaking/pausing...
  2. T

    BI won't stop recording after movement stops

    Howdy, First time BI4 user. Using a single Hikvision DC2 camera. I have motion/trigger enabled, object size set to where it triggers as I would like, but I'm finding the video continues to be recorded, sometimes for minutes on end even though the camera view window no longer has a blue or red...
  3. I

    How to turn cameras on and off with alarm setting?

    Is there a way to turn off cameras so live view is disabled or shows dummy picture and no new recordings are created. The reason I want this functionallity is that I want to have all cameras off when alarm is off. Outdoor cameras on when alarm set to intruder protection and all cameras on when...
  4. C

    FPS / Bitrate Etc...

    On to other settings now on my camera journey Using Blue Iris should I set the FPS in the camera or in Blue Iris software, or both. I figure after testing and playing with my HD H.264 cameras a good FPS will be between 7 and 15 FPS Now that leeds to next 2 questions on Bitrate setting, a...
  5. Overcon

    Ipc-hfw2300r-z

    I just picked up a Dahua IPC-HFW2300R-Z and was wondering if there is a way to reset the camera to DHCP without accessing the menus? my POE network is not on the subnet that the DAHUA camera is set to statically, I wish they would set them DHCP by default) so I have no way of accessing it. If...
  6. R

    Delete Records Hikvision PCNVR

    Hi everyone. I have two doubts about my hikvision 2032-I Can someone explain: - how can i delete records from my hdd? - In my hikvision, i have 5.16 fw installed, and i want to set up low sensitiy and an area to detect movement.. how could i do it? Thanks in advanced
  7. G

    connect remotely using DDNS - sricam camera

    Hello, I have a sricam camera which i want to connect remotely to using DDNS. Currently i can connect to the camera from my browser (using http://192.168.0.102:81/index.htm) and from my smartphone using APCamera (from anywhere). I am not sure if i need to use a DDNS server that my router can...
  8. T

    Best NVR Software that money can buy?

    I posted this in another forum but didn't get any responses. I'm hoping you guys can help me out. I'm a lonely IT admin that somehow got roped into supporting our company's entire IP camera setup. This system was installed by an outside contractor but then we had a falling out with that...
  9. G

    PTZ set Presets are not working.

    I have a FoscamFI9821W. I am no longer able to set the PTZ preset locations, which I believe used to work. I position the camera to the position I want, then did a hold to set on both the number and Go buttons. They do depress and come back. However, it still goes to the old location. Am I...
  10. T

    Setting NTP on an NVR and seperate Cameras

    Just would like to get some info on setting up NTP on the NVR and the camera's connected to the system. I do not have a NTP server on my network, and do not have so I was wanting to use the NVR as the server. I have tried to confirure the camera's to use the NVR as their NTP server, and with...
  11. A

    Hikvision Ds-78 and ivms4200 system

    I am new here and starting looking around to build a system for my home. I am running into a few issues and I am not sure what is possible and what is not. First, I plan on using the 2CD2132 cameras around the house and the DS-78 or the DS-76 NVR with 8 POE ports for expandability. I read the...
Top