Hi. The problem is crooked hands. (I apologize in advance for my English)
I have a DS-7216HGHI DVR and i have a problem
I uploaded the firmware to the recorder via a browser, and after the restart the dvr went into a permanent reboot. I uploaded the wrong firmware.
What I’ve already tried: via...
Hi everyone,
I’m facing an issue with two Dahua IPC-HDW1530T-0280B-S6 cameras after a power outage occurred while I was updating the firmware. I managed to successfully reset one of the cameras using the pin shorting method, but the other one is not responding as expected.
The power LED on the...
Hi all,
I'm trying to update an Hikvision NVR via TFTP because I can't remember the admin password, but I can't get the NVR to connect to the TFTP server.
I connect both the NVR and my PC to a router (they're the only two devices on the router, there's no device on the router wifi). I disabled...
I had pushed a firmware update from homesafeview app on my cellphone ad next thing I see is NVR is stuck on Swann logo. Tried all troubleshooting I can but no go. Tried to connect NVR with Hikvision TFTP and using IP as 192.0.0.128 and no, it doesnt work. Cant even connect camera with TFTP...
Hi,
Does anyone know the process to firmware flash one of these devices? I have tried TFTP server on 192.168.1.128 and 192.0.0.128 and nothing happens on load up. I have connected via JST 4 pin to see if I can force update by pressing Ctrl + U on startup, but on this device it says press any...
Hi,
Recently I've bought a DS-7604NXI-K1/4P NVR from a authorized Hikvision reseller in the Netherlands. After setting up the smart events I've noticed some inconsistencies when events we're triggered. After trying to finetune some settings in the configuration I was still unhappy about the...
Hi All,
I did a rookie mistake and updated my DS-9632NI-I8 firmware to the most recent (v4.5xxx) downloaded from Hikvision website. I failed to verify if the NVR was currently on 3.42 prior. Anyhow, the update went thorugh just fine, however the username drop down when connected directly to...
Hi,
I have a DS7608HUHI-K1 DVR which is password locked. I have tried to reset the password on the device using TFTP on IP 192.0.0.128 but the DVR does not request the file when turned on. I have then connected to the device using the 4 pin connection to force the device to request the firmware...
Hi
I created a new hik connect app and I am trying to reconnect to my hikvision doorbell DS-KB6403-WIP . Unfortunately it is bound to my previous account and asking for a password to unbind which i have forgotten. Is it possible to reset the password on these doorbells? there is no reset button...
Hello everyone,
I am in need of some help. As a lot of people may have done, I purchased an apparent never used but opened box HiLook by Hikvision camera from eBay. I have set cameras up before with ease and it was clearly obvious after connecting the camera to my network and using the SADP...
Bought a second hand DS-7216HGHI-SH. Was told that just power adapter is missing.
I have added regular 12V DC socket in parallel, so I can use standard 12V connector.
In process I have noticed that all four 470u/10V caps were swollen, so replaced all
caps just in case. On board battery CR-1220...
Hello All,
After a remote firmware update the Dahua NVR keeps constantly rebooting after 40-60 seconds.
Probably a bad internet connection was the problem.
But I really want to know how to fix this....
Via TFTP we can login into the NVR, but while flashing the new firmware the NVR reboots...
Hello,
i have a problem to import firmware to DVR DS-7108HQHI-F1/N with TFTP. I'm working with TFTP past years, but last year with Win10 I cannot connect using TFTP. Only says that is connected but not continuing to upload. With and without serial connection is the same problem.
[2019-04-03...
Hi all, hoping someone may be able to help please.
I recently received an NVR with corrupted database (likely installing incorrect firmware), and want to put fresh firmware on it and try to bring it back to life.
It's a region RR , currently can boot up to GUI showing v4.0 of whatever firmware...
Hey Folks,
searched lots of threads but did not find an answer yet...
have two bricked IPCAMs from ieGeek 1080p which I try to update via UART Interface:
System startup
U-Boot 2010.06 (Nov 27 2017 - 16:15:12)
Check Flash Memory Controller v100 ... Found
SPI Nor(cs 0) ID: 0xc8 0x40 0x18...
Hi, I bought a Hikvision DVR last week and bricked it when I tried to update it with a wrong firmware. The problem is that when I use TFTP to recover it, it starts transmitting digicap.dav, and....starts again. And again. It keeps doing that. I have the 192.0.0.128 TFTP, and a successful ping on...
Easy recovery without serial: Dahua IPC EASY unbricking / recovery over TFTP
Hello,
I broke my camera by accident while messing with the firmware and had to recover it.
Since I am not the only one that this has happened to and will probably not stay the last one: Here is a simple tutorial on...
Hello,
i bricked my DS-2CD2432F-IW after a Update vorm 5.2.5 to 5.3.0 :( Its a CN Camera and it was MTD hacked.
At all the Time the TFTP Server worked fine. But after this Update (via WebIF) there is even no response when Ping 192.0.0.64 after Boot. Camera is in Boot loop.
On my other...
Hi,
I've read hundreds of posts on here and elsewhere about fixing these Hikvision cameras and can't seem to get anywhere...
I've got a DS-2CD2532F-IS camera that was bought from an Amazon seller, in his message it said it was a Multilanguage product, but it does have Chinese writing all over...
Hi, I bought multiple Hikvision DS-2CD2x32 cameras (about a year plus ago) on Amazon from a seller called Hikvision. My cameras do not have "CH" in their serial numbers. (However, as far as I know, they still could be Chinese/gray-market. Amazon seems legit to me, but I'm hardly an expert on the...
Hi All,
I've read a ton of articles about restoring my Aliexpress bought 2CD2032-I and I don't seem to be getting anywhere.
I naively thought upgrading a firmware was as simple as a mobo, predictably I went to hikvision, downloaded the latest 5.3.0, to replace the shipped 5.2.5, installed the...
Hi All,
I have poured through the forums and tried everything I could find, but...
I have a DS-2CD2532-IWS, manufactured 02/2015, and shipped with firmware V5.2.8_141231. It quit broadcasting yesterday and the web tool would not respond. It was connected via a router, so I attached it to my...
Hello guys, i need a little help.
I have DS-2CD6026FHWD aka Darkfighter with basic firmware 5.1.4. I need to upgrade it to 5.3.4 to have LPR recognition inside it, but when i try upgrade failed. So i took Hikvision TFTP autoupdate, followed all instructions and still i am not at upgrade...
The reason I joined this forum was that my HIKVision DS-2032-I that I purchased on Amazon got bricked when I tried to update the firmware to V5.2.3 build141024 via the web interface.
TFTP via the network port does not seem to work properly. I used Wireshark to discover that it never goes...
Ok, so it is not like I've not setup 400 or so of these cameras now so I feel I know my way around pretty well. Yet here I sit stumped and ready to severely injure some Hik 3032 cameras......
I am installing 24 Hik cameras in both bullets and domes right now at a new site. I have about 16...
Hi guys,
I have searched in vain for some info on doing (or NOT doing!) a firmware-upgrade of my 5 cams.
I have the following:
As you can see, all cams have firmware V5.1.0 - but different builds! What worries me is that on HikVisions portal, only V5.1.0 build 131202 is available - i.e...
Hi!
I have been searching for a general guide to what NVR software is compatible with what cam software - but so far in vain.. Maybe someone here can help? :) Sorry if this topic has already been covered a trillion times; I have just not been able to find anything authoritative in this regard...