4.2.8 - January 7, 2016 - Hardware Acceleration
- Thread starter fenderman
- Start date
- Mar 9, 2014
- 36,892
- 21,408
Ssayer
BIT Beta Team
Updating what I posted last (also now on 4.2.8.2)...
I record 24/7 cutting every hour. When I enable hardware acceleration, I can't view alerts from my three Geeya cams from the current hour until the current hour has been cut and a new hour started. Changing recording from D2D to Re-encode fixes that, but ups my CPU usage. So for now, I'm running the latest, but without hardware acceleration so that I can continue to use D2D on all cams. (I emailed Ken)
I record 24/7 cutting every hour. When I enable hardware acceleration, I can't view alerts from my three Geeya cams from the current hour until the current hour has been cut and a new hour started. Changing recording from D2D to Re-encode fixes that, but ups my CPU usage. So for now, I'm running the latest, but without hardware acceleration so that I can continue to use D2D on all cams. (I emailed Ken)
James DiBernardo
Young grasshopper
Kinda depressed about the new support features.. now there is a constant reminder in red that support has expired days before this was implemented...
Most likely some hardware configuration was reporting double the correct CPU usage.
In case someone is following my pursuit of hardware acceleration, I just tried uninstalling BI completely and reinstalling. Unfortunately, no change. I think I'll conclude there's nothing I can do on my end and patiently wait for an update to resolve the problem.
- Mar 9, 2014
- 36,892
- 21,408
You should contact support so he can figure out what is going on with your system.
beepsilver
Getting comfortable
You're using Intel graphics? Is your processor supported (ark.intel.com)? And I'm sorry, I didn't read very far back, but do you have hardware acceleration turned on in BI (Options>Cameras>Use Intel HD hardware acceleration for H.264 decoding).
Have you tried using Direct to Disc with your cameras? Is Hardware decoding set to On or Default in Camera Properties>Video>Configure? Are your cameras set to use anything other than H.264 perhaps H.264+? One final thought...on my Hikvisions, if I set the exposure time to other than the default of 1/30, my fps becomes capped at 15fps even though I specified higher than that. Have you changed any exposure settings? Sorry if you've covered any of this before....these suggestions are at the limit of my understanding, but I hope you get it resolved....it makes a BIG difference!
lol @ fendermart
Running an oldish alienware laptop with i7 3610QM (2.3/3.3GHz), intel HD graphics 4000 (and an obviously unused nvidia GT650m - uses "optimus" technology which means it only kicks in when an application tries to use it anyway).
Running six 1080p cameras at 20 - 25fps.
Before update: my cpu usage would hover between 40 to 80%. Did not matter whether I was using the computer for other things or not - the CPU use was just that variable. Opening too many chrome tabs and having a user logged in could get the cpu to max out at 100%. Opening google earth would max out cpu.
After update: The cpu has been hovering between 19 to 35%. Seems to stay around 19 - 22% when not touching the computer. Goes to 30% if fullscreening a cam. A few chrome tabs with pics and stories easily makes it jump upto 50%. Opening google earth (which turns on the nvidia card) and zooming in still maxes out cpu. I'd theorize this is caused by thermal throttling.
CPU temps have dropped fairly significantly from 95°C to ~87°C. Ambient temp is 38°C.
Got another 6 cams to turn on, not sure if the system can handle it!
Stoked with the improvement! Will be interesting to see the nvidia optimisation as well
Running an oldish alienware laptop with i7 3610QM (2.3/3.3GHz), intel HD graphics 4000 (and an obviously unused nvidia GT650m - uses "optimus" technology which means it only kicks in when an application tries to use it anyway).
Running six 1080p cameras at 20 - 25fps.
Before update: my cpu usage would hover between 40 to 80%. Did not matter whether I was using the computer for other things or not - the CPU use was just that variable. Opening too many chrome tabs and having a user logged in could get the cpu to max out at 100%. Opening google earth would max out cpu.
After update: The cpu has been hovering between 19 to 35%. Seems to stay around 19 - 22% when not touching the computer. Goes to 30% if fullscreening a cam. A few chrome tabs with pics and stories easily makes it jump upto 50%. Opening google earth (which turns on the nvidia card) and zooming in still maxes out cpu. I'd theorize this is caused by thermal throttling.
CPU temps have dropped fairly significantly from 95°C to ~87°C. Ambient temp is 38°C.
Got another 6 cams to turn on, not sure if the system can handle it!
Stoked with the improvement! Will be interesting to see the nvidia optimisation as well
4.2.8.2 works for me with graphics card disabled and using onboard graphics. Very cool too, low 70% CPU usage with no limit live preview rate, massive improvement!
I have the extra 8 pixel depth on all 1920x1080 cameras (and lost motion masks accordingly), but no doubt that will be taken care of soon. Great stuff!
I have the extra 8 pixel depth on all 1920x1080 cameras (and lost motion masks accordingly), but no doubt that will be taken care of soon. Great stuff!
Absolutely no improvement for me. Yes, Hardware enabled. 3770K which supports acceleration. Cameras at Default or On. Either way, nothing. in fact CPU usage is up a tad. 24 megapixels total. 68% total with 3 clients.
- Mar 9, 2014
- 36,892
- 21,408
have you restarted the pc? are you did you set blue iris to record direct to disk for all cams? are most of your cameras h.264?
I can't get the hardware acceleration to work on any Intel HD 3000 system (that has Quick Sync)...the ones that need it most.
- Mar 9, 2014
- 36,892
- 21,408
650hp has the same processor as bp2008 so if he is having an issue there must be some driver or software that is causing it not the processor.
- Mar 9, 2014
- 36,892
- 21,408
Your issue may also be related to something else other than the processor, hopefully Ken will sort it out for you soon.
cyberwolf_uk
Getting comfortable
- Sep 27, 2014
- 634
- 800
My quick review of V4.2.8.2
Running on test rig with the following specs:-
i7-4790K with 16GB of RAM and 2 x 1TB SSD's
**********************************************
Cameras
8 Hikvision 3 meg @ 10 - 15 fps
1 Huisun 2 meg @ 15 fps
2 Foscam 1 meg @ 10 fps
All Direct to Disk except one Foscam.
**********************************************
CPU Usage now 5 to 7% With Hardware Acceleration switched on
CPU Usage previously between 20 - 30%
**********************************************
For me it just shows what an excellent program Blue Iris is and worth every penny if not more. Big respect to Ken and his team for this.
Now if only he could make an spk for my Synology so I could have it running on there
Running on test rig with the following specs:-
i7-4790K with 16GB of RAM and 2 x 1TB SSD's
**********************************************
Cameras
8 Hikvision 3 meg @ 10 - 15 fps
1 Huisun 2 meg @ 15 fps
2 Foscam 1 meg @ 10 fps
All Direct to Disk except one Foscam.
**********************************************
CPU Usage now 5 to 7% With Hardware Acceleration switched on
CPU Usage previously between 20 - 30%
**********************************************
For me it just shows what an excellent program Blue Iris is and worth every penny if not more. Big respect to Ken and his team for this.
Now if only he could make an spk for my Synology so I could have it running on there
Last edited by a moderator:
- Mar 9, 2014
- 36,892
- 21,408
@cyberwolf_uk Those are some seriously impressive numbers for your load. Do you have blue iris minimized or displaying full time?
cyberwolf_uk
Getting comfortable
- Sep 27, 2014
- 634
- 800
Full display running full time, It's displayed on a 24" screen in the living room so we always know what is going on around my home! The monitor is switched off when we go to bed then I have an iPad displaying it all via the web client.
I set audible alarms for 2 of the indoor cameras which would wake me up If they were to go off. Then I know there is going to be trouble :mad-new: