Yes it works fine over RTSP in my case on the firmware and model mentioned above. I tested using the following format on VLC:
Code:
rtsp:/admin:password@192.168.254.4:554/Streaming/Channels/101Does anyone know which version Hikvision firmware will work on an annke NVR 8 port, model is N88PCH
Thanks
Thanks
Whoever might be interested 
i got it nicely running in shinobi. I used the rtsp:
rtsp:/user:password@192.168.xxx.xx:554/Streaming/Channels/101?transportmode=unicast&profile=Profile_1
also ONVIF worked without issues. For Shinobi i manually had to pick the hikvision template though.
All Cameras also work perfectly in the hikvision app to my surprise (With remote access)
i got it nicely running in shinobi. I used the rtsp:rtsp:/user:password@192.168.xxx.xx:554/Streaming/Channels/101?transportmode=unicast&profile=Profile_1
also ONVIF worked without issues. For Shinobi i manually had to pick the hikvision template though.
All Cameras also work perfectly in the hikvision app to my surprise (With remote access)
I would asume, as the updated cameras did work in the annke app and hikvision (but just in one of them as it says the serial# is already registered if you have it in annke or hikvision already)
Does anyone know which hikvision firmware will work on the newer Annke N88PCH, seems like identical to DS-7608NI-M2/8P , but unable to use this model's firmware.
thanks
thanks
VisionxOrb
Getting the hang of it
Hello All,
About the NP48AW, there are 2 version
The Old One : HIKVISION UK PORTAL
The New One : HIKVISION UK PORTAL
I got the old one and flashed this firmware, if you do you want loose 4k capabilities, do not flash. 4k cameras can still be set to 1080p.
I now got 2 options : flashing cameras to hikvision firmware and see if it solve the problem .. or flash Annke firmware on the NP48AW... problem .. the NP48AW firmware link on annke website is down/wrong.
fr.annke.com
Do someone have the NP48A Annke firmware ?
Thanks
Ps : what is this application : ?
Is this the SDK ..? Cause i downloaded a 512Mb archive from the link in the first post .. and it was sources only ....
About the NP48AW, there are 2 version
The Old One : HIKVISION UK PORTAL
The New One : HIKVISION UK PORTAL
I got the old one and flashed this firmware, if you do you want loose 4k capabilities, do not flash. 4k cameras can still be set to 1080p.
I now got 2 options : flashing cameras to hikvision firmware and see if it solve the problem .. or flash Annke firmware on the NP48AW... problem .. the NP48AW firmware link on annke website is down/wrong.
ANNKE Download Center
ANNKE Vision Profitez du contrôle à distance le plus simple, partout et à tout moment Produits concernés Réservé aux systèmes avec enregistreurs vidéo numériques et systèmes PoE ANNKE Sight Bénéficiez d'un contrôle sans restriction, même en déplacement Produits concernés Réservé aux systèmes de...
fr.annke.com
Do someone have the NP48A Annke firmware ?
Thanks
Ps : what is this application : ?
Is this the SDK ..? Cause i downloaded a 512Mb archive from the link in the first post .. and it was sources only ....
Last edited:
I have an annke c800 I91BM which I upgraded to 5.5.800 a year ago. I can't upgrade it to any newer version. I start the upgrade and it's stuck at 0. Any ideas?
I've reset the camera to factory defaults and tried again. All of this was using a web browser.
I've reset the camera to factory defaults and tried again. All of this was using a web browser.
Hello there,
I red whole 11 pages of this thread and I have new issue that you guys might help me with that. I have bought annke I51DX panoramatic annke camera. I have N48PAW NVR with firmware V4.30.010 build 20210511 and this is the last one working from official annke webpage. The newer one with V4.71.000 build 20220627 is on annke webpage as well but its written that firmware before 210605 (I dont know what it means tbh) is not working, Its still on 0%, I have tried it. The reason why im writing this post is that my friend has same camera I51DX panoramatic annke and same NVR N48PAW but with firmware V4.71.205 build 230411 version of HW: C-R-K21B2-00 and it is working for him.
Do you have any suggestion how to fix my issue? I wrote to official annke support but so far no one responded.
Thank you.
I red whole 11 pages of this thread and I have new issue that you guys might help me with that. I have bought annke I51DX panoramatic annke camera. I have N48PAW NVR with firmware V4.30.010 build 20210511 and this is the last one working from official annke webpage. The newer one with V4.71.000 build 20220627 is on annke webpage as well but its written that firmware before 210605 (I dont know what it means tbh) is not working, Its still on 0%, I have tried it. The reason why im writing this post is that my friend has same camera I51DX panoramatic annke and same NVR N48PAW but with firmware V4.71.205 build 230411 version of HW: C-R-K21B2-00 and it is working for him.
Do you have any suggestion how to fix my issue? I wrote to official annke support but so far no one responded.
Thank you.
If anyone would be interested, I have tried shh to device and found out that its K74 platform board, Here is output from dmesg
# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.18.20 (root@CI-Backend-Slave-13-79) (gcc version 4.9.4 20150629 (prerelease) (Hisilicon_v500_20170922) ) #2 SMP Sat Jun 20 11:45:17 CST 2020
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: HIKVISON K74 Platform Board
[ 0.000000] HIKBASE version ##46205[kernel:45072] v2.1.0 build 2020-6-20
Is there way to somehow force it to upgrade it to higher version v4.71 ? or even hikvision ? any suggestion would be appreciated!)
# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.18.20 (root@CI-Backend-Slave-13-79) (gcc version 4.9.4 20150629 (prerelease) (Hisilicon_v500_20170922) ) #2 SMP Sat Jun 20 11:45:17 CST 2020
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: HIKVISON K74 Platform Board
[ 0.000000] HIKBASE version ##46205[kernel:45072] v2.1.0 build 2020-6-20
Is there way to somehow force it to upgrade it to higher version v4.71 ? or even hikvision ? any suggestion would be appreciated!
)
Thank you for the guide!
Annke c800 model I91BN
Succesfully upgraded to hikvision firmware version: V5.7.13 build 230706
The firmware was located at: Home » portal » Technical Materials » 00 Network Camera » 00 Product Firmware » G5 Platform » 01. (2xx3G2 2xx6G2(C) 2XX6G2H 2xx7G2(C) 2XX7G2H 3xx6G2(C) 3xx7G2(C) 1x83G0) » 1x83G0
Annke c800 model I91BN
Succesfully upgraded to hikvision firmware version: V5.7.13 build 230706
The firmware was located at: Home » portal » Technical Materials » 00 Network Camera » 00 Product Firmware » G5 Platform » 01. (2xx3G2 2xx6G2(C) 2XX6G2H 2xx7G2(C) 2XX7G2H 3xx6G2(C) 3xx7G2(C) 1x83G0) » 1x83G0
just to update on my end, this firmware version worked for me. the other Annke C800 accepted the 3xxxx firmware while the one I had a problem with (same model?!?!) accepted the 1xxxx
Olá, possuo uma annke i51dw panorâmica, não carrega no meu DVR hikvision, gostaria de mudar o firmware dela para hikvision, saberiam me informar qual modelo tenho que fazer download?
I have firmware annke NP48PAW old model and new, please contact meHello All,
About the NP48AW, there are 2 version
The Old One : HIKVISION UK PORTAL
The New One : HIKVISION UK PORTAL
I got the old one and flashed this firmware, if you do you want loose 4k capabilities, do not flash. 4k cameras can still be set to 1080p.
I now got 2 options : flashing cameras to hikvision firmware and see if it solve the problem .. or flash Annke firmware on the NP48AW... problem .. the NP48AW firmware link on annke website is down/wrong.
ANNKE Download Center
ANNKE Vision Profitez du contrôle à distance le plus simple, partout et à tout moment Produits concernés Réservé aux systèmes avec enregistreurs vidéo numériques et systèmes PoE ANNKE Sight Bénéficiez d'un contrôle sans restriction, même en déplacement Produits concernés Réservé aux systèmes de...
Do someone have the NP48A Annke firmware ?
Thanks
Ps : what is this application : ?
Is this the SDK ..? Cause i downloaded a 512Mb archive from the link in the first post .. and it was sources only ....
V4.71.205 build 230707 new model
V4.71.000_221026 old model
Last edited:
you lose detection of a person, a car, back to the annke firmware you will not be able to return now
WTF?!
Why was my post deleted? I provided a link to the description of how to return to the original firmware. I have verified myself that this method is effective!
Why was my post deleted? I provided a link to the description of how to return to the original firmware. I have verified myself that this method is effective!