tangent
IPCT Contributor
- May 12, 2016
- 4,626
- 3,979
good idea. also try adding some more twists to the mic cable.might take it apart and put it back together, IIRC the Mic is on an external board with a lead wire.. perhaps its not seated correctly or the wire is sitting on a voltage regulator and picking up switching noise.. sometimes just reseating the wire or taking the mic out, blowing into it to clear out any dirt/dust/manufacturing debris and putting it back in might clean up the noise.. If you installed an internal SD you could of easily yanked on that cable a lil too much..
its a hail marry, but if your competent at taking things apart and putting em back together its not alot of risk