Dahua Starlight Varifocal Turret (IPC-HDW5231R-Z)

giomania said:
So I finally set up email notifications today (IVS only), and had to turn them off due to too many emails.

I tried increasing the email frequency in the Network > SMTP (Email) settings, but that does not seem to work.

Any ideas?

Sent from my iPhone using Tapatalk
Click to expand...

flynreelow said:
Have you tried decreasing?
Click to expand...

giomania said:
Yes. I started out at the minimum of 60 seconds, and then went up to 300 seconds, but it will still send an email every minute if warranted by the triggers set.

Correction: The default is 0 seconds, which I am pretty sure I started out at, then went to 60 seconds, then 300 seconds.

Sent from my iPhone using Tapatalk
Click to expand...

Since I don't recall anyone posting about the large amount of emails received due to valid IVS-triggered event, I am guessing there are a few possible reasons:

1) Owners have a Dahua NVR, which has some extra options to limit the amount or frequency of emails.
2) Owners are using IDMSS or GDMSS paid apps and push notifications.
3) Owners are using Blue Iris.
4) Owners don't use email, and simply view the alerts on the camera and/or NVR playback area.

I want to have some idea of what my kids are up to when I am not there, so any guidance here is appreciated.

Mark
 
billv said:
Ok, let me try again....

Is there a way to update the text overlay besides the web GUI interface, such as an SDK or json or something else? I want to update the overlay with weather data periodically so need an way to do this programmatically from the computer the camera is connected to.

Thanks
Click to expand...
HTTP API
Usage Example. Line 17
 

Attachments

  • Like
Reactions: bohemian and DavidDavid
bohemian said:
That might do the trick.
Click to expand...

According to the API document above (thanks!), there mode are transitions (day/night, colour/b&w, flash on/off) that are tied to a property they refer to as "brightness". I assume it's some representation or the cameras ambient light sensor. If I could pull that value, I might be better off.

Problem is, I don't think it's exposed through the API.
 
billv said:
Thanks. I assume the ...CustomTitle[1].Text refers to the second line of the five available? And if I want to update all five lines I can just append them to the end, each starting with an ampersand?
Click to expand...
That isn't my script I linked, but I would assume the same. setup a string with 0-4, or maybe more, and send it. see which lines work or dont :)
 
giomania said:
Since I don't recall anyone posting about the large amount of emails received due to valid IVS-triggered event, I am guessing there are a few possible reasons:

1) Owners have a Dahua NVR, which has some extra options to limit the amount or frequency of emails.
2) Owners are using IDMSS or GDMSS paid apps and push notifications.
3) Owners are using Blue Iris.
4) Owners don't use email, and simply view the alerts on the camera and/or NVR playback area.

I want to have some idea of what my kids are up to when I am not there, so any guidance here is appreciated.

Mark
Click to expand...


Can someone please throw me a bone, here? :highfive:
 
Any idea what setrings can I change for this to get a bit brighter, I should move the center up and to the right too.
 

Attachments

  • Screenshot_20170907-170412.png
    Screenshot_20170907-170412.png
    3 MB · Views: 71
giomania said:
Can someone please throw me a bone, here? :highfive:
Click to expand...

Not exactly sure what your question is....

But I've never messed with emails. Was using Dahua NVR IVS push notifications to the paid gDMSS app on my Android till that feature broke. Supposedly the new NVR firmware might have fixed that.
 
  • Like
Reactions: giomania
DarkHelmet said:
HTTP API
Usage Example. Line 17
Click to expand...
So I have a number of the 5231's installed but I also have some QSee cameras that were rebranded from Dahua and are ID'd as IPC-HFW3200S.

These cameras don't have the custom text overlay in the GUI that the 5231 does. But the parameters do show up in the VideoWidget. Can I set the parameters thru the HTTP commands? I guess a little testing might be in order. BTW, I've looked for updated firmware for the camera and the only thing I found close is only about 2 weeks later than one that's installed.
Thanks
 
Hi All, with this camera, am I right in saying I can just pinch and zoom in the Mobile App to utilise the 4 x Optical Zoom? when i do, it looks very pixelated. Is that digital zoom?
 
dastrix said:
Hi All, with this camera, am I right in saying I can just pinch and zoom in the Mobile App to utilise the 4 x Optical Zoom? when i do, it looks very pixelated. Is that digital zoom?
Click to expand...
that is digital zoom...the varifocal is not used as a zoom, it is intended to be used at the time of setup...
 
Not sure I follow. So what is advertised as 4x optical zoom, whats that mean if you cant zoom whilst the camera is running?
 
dastrix said:
Not sure I follow. So what is advertised as 4x optical zoom, whats that mean if you cant zoom whilst the camera is running?
Click to expand...
the varifocal can be adjusted while its running but its slow and effectively unusable...it is not intended to be adjusted for live changes as a ptz camera...its used during installation to precisely adjust the field of view...furthermore, when zooming in you generally need to be able to adjust the camera on the vertical plane or else you wont capture anything useful.....
 
  • Like
Reactions: DavidDavid
OK, so its slow but does allow you to live adjust? If so, how does one do this if using BlueIris or only available via the Web interface of the camera?

I ask because sometimes i watch it live on my dog, when she moves up into my carport I want to optically zoom in. If it takes a minute to do that, its fine.
 
Ive looked at both. Ive got them infront of me. The buttons appear greyed out, so I was wondering why, can this even zoom, etc hence the post. I assume its the Microscope with + and -
 
You must log in or register to reply here.
Top Bottom