Hello,
I have one DVR DS-7216HQHI-K1/A . I want to default all the configuration but I can't do it from software, monitor or IE.
I want to upgrade it via serial.
I had tried with command "update", after reboot nothings change.
HKVS $ setenv bootcmd ';update'
timeout for link [5000]!
MAC: F8-4D-FC-EF-29-B3
TFTP from server 192.0.0.128; our IP address is 192.0.0.64
Download Filename 'digicap.dav'.
Download to address: 0x83000000
Downloading: # [ Connected ]
################################ [ 1.000 MB]
################################ [ 2.000 MB]
################################ [ 3.000 MB]
#######################T ######### [ 4.000 MB]
################################ [ 5.000 MB]
################################ [ 6.000 MB]
################################ [ 7.000 MB]
################################ [ 8.000 MB]
###################T ############# [ 9.000 MB]
################################ [10.000 MB]
################################ [11.000 MB]
################################ [12.000 MB]
################################ [13.000 MB]
################T ################ [14.000 MB]
################################ [15.000 MB]
################################ [16.000 MB]
################################ [17.000 MB]
################################ [18.000 MB]
############T #################### [19.000 MB]
################################ [20.000 MB]
################################ [21.000 MB]
################################ [22.000 MB]
################################ [23.000 MB]
########T ######################## [24.000 MB]
################################ [25.000 MB]
################################ [26.000 MB]
################################ [27.000 MB]
################################ [28.000 MB]
####T ############################ [29.000 MB]
################################ [30.000 MB]
##############
done
Bytes transferred = 31916760 (1e702d8 hex)
cramfs.img checkSum ok !
### CRAMFS load complete: 3155424 bytes loaded to 0x82000000
## Booting kernel from Legacy Image at 82000000 ...
Verifying RSA ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
[ 1.892812] init(1) called reboot syscall, cmd: 0x0.
Thu Jan 1 00:00:01 UTC 1970
mv: can't rename 'ubi*': No such file or directory
Starting udev: [ OK ]
digicap is in the memory[f3f16c@83000000], do not need download.
RSA verifying ... OK
cramfs.img checkSum ok !
***
- ATTENTION!! PLEASE READ THIS NOTICE CAREFULLY ! *
- Don't power off or anything that interrupt it ! * ,
- The upgrade process will finish in 3 minutes ! *
- If this program fails, machine might be unusable ! *
***
Erasing cfg file ... Done
Writing ...
|######--------------------------------------------| 13%[ 4.906248] hi_gmac_v200 100a0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
|##################################################| 100%
Done
Checking ...
|##################################################| 100%
Done
Update successfully !
Press ENTER key to reboot