V2.1 firmware envelope, with digital signature based on PKCS with RSA-2048.
V2.1 firmware envelope, with digital signature based on PKCS with RSA-2048.
Please advise... how is the firmware used by sellers (of Chinese NVR's hacked to English) different to the official firmware from the Hikvision site, then modified to show English using the MDT hack or Firmware Tools mod shown on this forum (unless I am confused and they dont achieve that)?Ask your supplier for the English firmware.
Thank you. My most recently bought cameras (Chinese models, hacked to English, via AliExpress) are running 5.3.3.You can't MTD hack a 5.30 or above camera. But you can on lower fw
Any firmware that has the new encryption incorporated would help.Thank you. My most recently bought cameras (Chinese models, hacked to English, via AliExpress) are running 5.3.3.
Even though that is too new for MDT hack, if I can get supplier to email me a copy (and share it!) of this firmware that works in English on a Chinese camera, would that be better than 5.25 ?
Hacked? 5.3.5 is hard....Any firmware that has the new encryption incorporated would help.
- - - Updated - - -
Should have added that has been hacked by the Chinese.
Are you sure your camera's are still functioning? Can you log into your camera's web gui? Provide some details about what you did.Hello Guys,
I upgraded the firmware of my cameras and now my nvr doesnt see it. The device model number is an HNR30P8 and it's a rebranded hikvision. I would like to flash it to it's proper firmware of DS-76xxNI-E1(E2). Is this possible or am i screwed?
From what version to what version?I upgraded the firmware of my cameras and now my nvr doesnt see it
I upgraded my DS-2CD2332 Cameras to the latest firmware from V5.2.5 build 141201 to 5.3.0 build 150513 via the nvr upgrade. I didn't have time to validate by plugging it into a separate switch and connecting directly to it but when I called hikvision support they said that most likely I would need to upgrade my nvr to see it. The upgrade said that it succeeded.Are you sure your camera's are still functioning? Can you log into your camera's web gui? Provide some details about what you did.
Фигово читал походу )Прочитал всю тему. Утилита не работает.
Such a method exists.There is just one think that now we can do. Stop buying chineese models because it's not worth the rish of damaging camera. Still no clue about RSA key so new 2335 cams with 5.3.5 has only China lang and there is no way to switch it.
The region code of the camera is held within the flash memory in the 'hardware descriptor block'.Read the entire topic. Utility is not working. Tested on DS-2CD2132-I was originally a multi-language firmware 5.2.0 has been updated to firmware China 5.2.5 (520 everything was good NAS). Then the instructions via SSH was edited IEfile.tar.gz file-Eng has appeared (except Chinese). But with this camera work iVMS became due to mismatch between the language of the client with the camera (this only works if the iVMS change in Chinese language). Upgraded to 5.3.0 taken from a European site and changed the language utility before upgrading to 2 (Chinese)-Web Administration issued an error-language mismatch and not admitted in the configurator. Further lowers the firmware using Dawngrader 530 (the utility has changed the language on 1), the Web Configurator earned, but only in Chinese. Then I took the normal firmware and patched the 525 1 language-updated and still remained only the Chinese, again edited the IEfile.tar.gz file and added to the English language, but the video from the camera iVMS still does not show. So I don't understand what is the meaning of the utility hiktools. Tried different options but mul′tiâzyka has not received. There are other cameras 2132, but their touch has not become, because of the success achieved with one camera. Updated both through the site and through iVMS (when the site is not admitted)