How To Upgrade Amcrest / Lorex to Dahua Firmware And Get All Dahua Features

texastexas

n3wb
Joined
Oct 10, 2021
Messages
1
Reaction score
1
Location
fsg
OK, so this just in...

In the IP Config Tool, I downgraded the firmware to
"Amcrest_IPC-HX25(8)XX-Mole_Eng_N_AMCREST_V2.800.00AC000.0.R.191113.bin"

and then used the IP Config Tool to update to
"DH_IPC-HX25(8)XX-Molec_MultiLang_NP_V2.800.0000000.19.R.200628.bin"

Just had to use the IP Config Tool, I guess.



I have a IP8M-T2599. I can't find the old Amcrest firmware to downgrade to. Is there a site with old firmwares?
 

Adrianus

Getting the hang of it
Joined
Dec 1, 2020
Messages
34
Reaction score
30
Location
92647
I have a few Amcrest IP5M-T11179EW-28MM cameras and want to use them with my Dahua NVR302A-08/4KS2 (NVR4208-8P-4KS2) but the NVR does not recognize the Amcrest cameras. Can I install Dahua firmware so that the NVR does recognize the cameras? If so, what Dahue firmware should I use and where can I find it?
 

mat200

IPCT Contributor
Joined
Jan 17, 2017
Messages
13,669
Reaction score
22,773
I have a few Amcrest IP5M-T11179EW-28MM cameras and want to use them with my Dahua NVR302A-08/4KS2 (NVR4208-8P-4KS2) but the NVR does not recognize the Amcrest cameras. Can I install Dahua firmware so that the NVR does recognize the cameras? If so, what Dahue firmware should I use and where can I find it?
Hi @Adrianus

That's odd .. I would expect the Dahua OEM NVR to recognize the Amcrest ( Dahua OEM ) cameras ..

check that you have the proper user / passwords sync'ed up on the NVR and cameras.
 

Adrianus

Getting the hang of it
Joined
Dec 1, 2020
Messages
34
Reaction score
30
Location
92647
Hi @Adrianus

That's odd .. I would expect the Dahua OEM NVR to recognize the Amcrest ( Dahua OEM ) cameras ..

check that you have the proper user / passwords sync'ed up on the NVR and cameras.
You are correct! I did not have the correct password. The only thing that does not work is the Trip wire setup (IVS?). I can not find a way to enable it.
 

Mr_milo

n3wb
Joined
Feb 10, 2021
Messages
9
Reaction score
6
Location
California
You are correct! I did not have the correct password. The only thing that does not work is the Trip wire setup (IVS?). I can not find a way to enable it.
You might need to switch the firmware to get IVS. Can't remember if mine had it before switching firmware but I don't think it did.
 

supersk

n3wb
Joined
Jan 12, 2020
Messages
3
Reaction score
0
Location
US
Is there a way to revert back from the Dahua firmware to the Amcrest firmware?

I tried using both the camera's web admin panel and the Amcrest IP Config Tool and neither worked.
 

mat200

IPCT Contributor
Joined
Jan 17, 2017
Messages
13,669
Reaction score
22,773
You are correct! I did not have the correct password. The only thing that does not work is the Trip wire setup (IVS?). I can not find a way to enable it.
Hi @Adrianus

Check if the NVR firmware for the NVR4208-8P-4KS2 supports IVS .. some lower tier NVRs firmware have less features ...

If the NVR does not have the firmware for IVS it can not communicate that info back to the camera ( which needs to also have the IVS firmware options )
 

wongtong

n3wb
Joined
Jan 23, 2021
Messages
2
Reaction score
1
Location
usa
appAutoStart=true
deviceType=IP8M-T2599E
hardwareVersion=1.00
processor=SSC328Q
serialNumber=
updateSerial=IPC-HDW2831TP-AS-S2
updateSerialCloudUpgrade=IPC-HDW2831TP-AS-S2:01:

I tried to upgrade my armcrest with DH_IPC-HX25(8)XX-Molec_MultiLang_PN_V2.800.0000000.19.R.200628.bin but getting update package invalid



I need to downgrade to an older version How To Upgrade Amcrest / Lorex to Dahua Firmware And Get All Dahua Features then upgrade to the latest dahua FW
 
Last edited:

Yesitsme

Getting the hang of it
Joined
May 7, 2021
Messages
20
Reaction score
35
Location
new jersey
appAutoStart=true
deviceType=IP8M-T2599E
hardwareVersion=1.00
processor=SSC328Q
serialNumber=
updateSerial=IPC-HDW2831TP-AS-S2
updateSerialCloudUpgrade=IPC-HDW2831TP-AS-S2:01:

I tried to upgrade my armcrest with DH_IPC-HX25(8)XX-Molec_MultiLang_PN_V2.800.0000000.19.R.200628.bin but getting update package invalid



I need to downgrade to an older version How To Upgrade Amcrest / Lorex to Dahua Firmware And Get All Dahua Features then upgrade to the latest dahua FW
I have the same model, let me know if you have any success and what you gained by flashing to Dahua, thanks
 

slapdawg

n3wb
Joined
Jan 31, 2020
Messages
3
Reaction score
0
Location
Ohio
Has anyone loaded Dahua firmware on to an Amcrest NV2116-HS NVR? I have one of those models, and I'm currently experiencing the issue where it refuses to do motion event recording on RTSP/ONVIF cameras. I read earlier in the thread that someone resolved that issue by loading the equivalent Dahua firmware to their particular model of Amcrest NVR.

I'm seeing a Dahua firmware labeled: DH_NVR2XXX-I_Mul_V4.002.0000000.0.R.210727

If I'm willing to take the chance, should I just be able to load the BIN file from that download via the Firmware Update page on my Amcrest NVR?

Thanks for any info or advice!

-RS
 
As an Amazon Associate IPCamTalk earns from qualifying purchases.

brianegge

Pulling my weight
Joined
Apr 27, 2020
Messages
194
Reaction score
248
Location
Ridgefield, CT
I updated my Amcrest NV4108E-HS with Dahua firmware with "DH_NVR4XXX-4KS2_MultiLang_V4.001.0000005.1.R.210713". It works more or less, and has an interesting mix of Amcrest and Dahua branding:

1642623063810.png

It ads the AI search as well as the audio player.
1642623476112.png

Unfortunately, my live feeds and playback no longer work in the browser:
1642623218753.png
I've tried download the certificate, but I can't seems to make sure of the cert, nor do I know what it might be needed. It is in fact sending a certificate.

I don't know if I need to update the bootloader, if there is another way to fix this 'certificate' problem.
 

slapdawg

n3wb
Joined
Jan 31, 2020
Messages
3
Reaction score
0
Location
Ohio
Thanks. I made the jump and loaded the Dahua firmware. Same result as above... get the certificate issue, but I rarely view in browser, so not too worried about that. Unfortunately it still doesn't seem to be recording motion events from one of my non-Amcrest cams, but I still want to fiddle around with it some more, just in case I'm overlooking something.
 

Flintstone61

Known around here
Joined
Feb 4, 2020
Messages
6,587
Reaction score
10,894
Location
Minnesota USA
I updated my Amcrest NV4108E-HS with Dahua firmware with "DH_NVR4XXX-4KS2_MultiLang_V4.001.0000005.1.R.210713". It works more or less, and has an interesting mix of Amcrest and Dahua branding:
Interesting. I have that NVR as well....Oh reading further, I missed the part about live view issue.
Maybe I better leave it alone.
 

brianegge

Pulling my weight
Joined
Apr 27, 2020
Messages
194
Reaction score
248
Location
Ridgefield, CT
Interesting. I have that NVR as well....Oh reading further, I missed the part about live view issue.
Maybe I better leave it alone.
I got the certificate issue sorted out - eventually. I had to enable https, then I had to fool around getting Chrome to trust the self signed certificate. My mixed branding went away after I refreshed by browser - now it's the generic Dahua throughout.
 

Flintstone61

Known around here
Joined
Feb 4, 2020
Messages
6,587
Reaction score
10,894
Location
Minnesota USA
So I have some recorders that are amcrest that have a certificate menu, but I've never had to deal with them, to get the recorder going.
Are the Dahua defaults different in the firmware?
 

brianegge

Pulling my weight
Joined
Apr 27, 2020
Messages
194
Reaction score
248
Location
Ridgefield, CT
I think the plain dahua firmware requires all the http streams to be over TLS. I don't know why and can't seem to disable it. My camera are only on my LAN, so I don't care about the encryption.
 

surge919

n3wb
Joined
Apr 4, 2020
Messages
6
Reaction score
4
Location
Atlanta
I received my IP5M-T1179EW-28MM and figured I'd post the steps I followed to upgrade to the Dahua firmware
Does anyone with this camera know what is added beyond what the Amcrest firmware provides?

the firmware posted shown in other posts shows a build date of 2020-06-28 but on that page there is a newer version with a build date of 2021-07-23

Here are my steps but you should be able to jump right to the latest Dahua firmware once you downgrade the Amcrest firmware

out of the box with Amcrest Firmware
the web ui shows
V2.800.00AC001.0.R, Build Date: 2020-12-30 as the latest
when I downgrade to Amcrest_IPC-HX25(8)XX-Mole_Eng_N_AMCREST_V2.800.00AC000.0.R.191113.bin
it shows
V2.800.00AC000.0.R, Build Date: 2019-11-13

upgraded to what was listed in the earlier posts
DH_IPC-HX25(8)XX-Molec_MultiLang_NP_V2.800.0000000.19.R.200628.bin
shows as
V2.800.0000000.19.R, Build Date: 2020-06-28

the page where I found the above Index of /images/Files/Firmware
has a more recent version
DH_IPC-HX25(8)XX-Molec_MultiLang_NP_USA_V2.820.0000000.36.R.210723.bin
this shows as
V2.820.0000000.36.R, Build Date: 2021-07-23
 

Blazin

n3wb
Joined
Feb 6, 2022
Messages
2
Reaction score
0
Location
Brooklyn
I just bought a set of Amcrest IP8M-2496EW-28MM and IP8M-2493EW. I haven’t received them yet but am doing research preparing. I noticed that newer screenshots of the Amcrest config page shows IVS and Face Detection. Do the Amcrests now have all the native Dahua functionality? Is there any reason to flash Dahua FW over the Amcrest anymore ?
 
Joined
Jun 2, 2021
Messages
28
Reaction score
11
Location
usa
I received my IP5M-T1179EW-28MM and figured I'd post the steps I followed to upgrade to the Dahua firmware
Does anyone with this camera know what is added beyond what the Amcrest firmware provides?

the firmware posted shown in other posts shows a build date of 2020-06-28 but on that page there is a newer version with a build date of 2021-07-23

Here are my steps but you should be able to jump right to the latest Dahua firmware once you downgrade the Amcrest firmware

out of the box with Amcrest Firmware
the web ui shows
V2.800.00AC001.0.R, Build Date: 2020-12-30 as the latest
when I downgrade to Amcrest_IPC-HX25(8)XX-Mole_Eng_N_AMCREST_V2.800.00AC000.0.R.191113.bin
it shows
V2.800.00AC000.0.R, Build Date: 2019-11-13

upgraded to what was listed in the earlier posts
DH_IPC-HX25(8)XX-Molec_MultiLang_NP_V2.800.0000000.19.R.200628.bin
shows as
V2.800.0000000.19.R, Build Date: 2020-06-28

the page where I found the above Index of /images/Files/Firmware
has a more recent version
DH_IPC-HX25(8)XX-Molec_MultiLang_NP_USA_V2.820.0000000.36.R.210723.bin
this shows as
V2.820.0000000.36.R, Build Date: 2021-07-23

Do you have the old amcrest firmware by any chance? I can't download that specific version from the amcrest site anymore.
 
Joined
Jul 23, 2019
Messages
19
Reaction score
13
Location
USA
what firmware would i need to install for ip8m-t2599ew camera?

or does anyone know the dahua part number of this camera?
 
Last edited:
Top