Hi folks, I just picked up one of these cameras from Amazon (
) and did a few searches, found this thread.
If I look at the info on the camera I see this:
Device Type
VD-2T63-A - a further search on this model I found this model on the Vikylin site:
6MP 98ft IR Night Vision Starlight PoE IP Security Dome Outdoor Camera IP67 with Metal Case
System Version V2.820.003C000.0.R, Build Date: 2021-11-09
WEB Version V3.2.1.1092977
ONVIF Version 20.06(V2.9.1.1000915)
Security Baseline Version V2.1
I'm testing it and have mounted it inside as I wanted a wide angle indoor camera, even though this is for outdoor, I haven't found one and this one looked promising, to replace they Wyze cam I have that keeps dropping out (beta/unsupported RTSP, etc...).
I can say the the FOV is as wide as the WC3, so this is great.
The colour night vision doesn't seem to be as good as the WC3 ($30 cam), pretty unimpressed with this, but that's ok, B/W is fine. I've also found that I need to turn on WDR in order to see everything at the same "levels" - again comparing to WC3 which is mounted in the same spot.
Menus look pretty on par with my Amcrest, I guess Dahua menus look the same.
I didn't have to install any plugin for a browser; I did turn on HTTPS (which it defaults to after the fact) and then on TinyCam I got a message "
this camera doesn't support RTSP" - I think it's because the port needs to be changed from 80 to 443; didn't test but makes sense
ONVIF works and camera works great with BI5.
It very much seems to be some version of
this:
131.84US $ |IPC T2231T ZS 2MP Starlight WDR IR Eyeball Network Camera 2.7~13.5mm Focal Length Replace the IPC HDW2231R ZS,free DHL shipping|Surveillance Cameras| - AliExpress
and this:
IPC-HDW4631EM-ASE (although w/o the light)
I would much rather have a known "safe" version but availability for Canada is more sparse than the US.
I am testing and got it via Prime so I can return it if unhappy within 30 days.
Really love the wide angle on the lens, although if I set it higher than 2048x1536 the picture is "squished" and not corrected in BI despite the forced settings I use.
Would appreciate any thoughts; apologies if I should have started a new thread (I can move this over to a new one) but since there was one on this model already I used it.
TY