Latest New 20180813 Firmware for DH_IPC-HX5X3X-Rhea

jazzy1 said:
I've noticed my SD card has disappeared from my 5231 cams.....currently on :
IPC-HDW5231R-Z
System Version2.640.0000002.0.R, Build Date: 2018-05-23

Anyone experienced this? is it the firmware? should i revert to an earlier one or upgrade to newer? or try restore to defaults or something?
The 2 cams this has happened on also are constantly losing connection too..ie "no signal" Error 8000274d (refused; check ip)

Thanks!
Click to expand...
Try Resetting completely using the button inside?
 
jazzy1 said:
wish i could but the cams are super hard to get to while mounted...any other option?
Click to expand...

You could access the Web Login and do a "factory /defaults / reset"...

But remember, IP will change.
If you are going to reset this way, try the one without resetting the IP first... and if that doesn't work, do the full factory reset.
 
  • Like
Reactions: aristobrat
jazzy1 said:
I've noticed my SD card has disappeared from my 5231 cams.....currently on :
IPC-HDW5231R-Z
System Version2.640.0000002.0.R, Build Date: 2018-05-23

Anyone experienced this? is it the firmware? should i revert to an earlier one or upgrade to newer? or try restore to defaults or something?
The 2 cams this has happened on also are constantly losing connection too..ie "no signal" Error 8000274d (refused; check ip)

Thanks!
Click to expand...

Before flipping firmwares, try to do a "factory reset". That might already solve these issues. Then I'll advice to run into a "test bench" mode: install the cam on a certified (short) UTP cable to eliminate faulty (failing) wire connections.

Good luck!
CC
 
This firmware have a latest new version, a firmware at Jan. 2019, some guys already got cameras with the latest new firmware, i will post it here very soon. ipct always the latest new firmware, lol.
 
  • Like
Reactions: aristobrat
catcamstar said:
Before flipping firmwares, try to do a "factory reset". That might already solve these issues. Then I'll advice to run into a "test bench" mode: install the cam on a certified (short) UTP cable to eliminate faulty (failing) wire connections.

Good luck!
CC
Click to expand...
after doing factory reset from the UI on 2 of the 5231 cams I get about 90% fewer disconnects....weird...could they really be firmware-related?
 
Andy do you happen to have the latest firmware available for this? Really looking forward to updating my cams, thanks.
 
Notrial said:
I think I'll wait till Andy confirms it...wouldn't want to brick my cams :D
Click to expand...
I would not upgrade to that latest firmware, as it has problems with it. Reboots, some settings not working as they should, etc.

If you upgrade to the latest one, you can not downgrade to the previous one anymore.

Andy posted the latest one a while back, but after many comments, including myself, about issues, he removed the link again to prevent more users from having the same problems.
 
SkyLake said:
I would not upgrade to that latest firmware, as it has problems with it. Reboots, some settings not working as they should, etc.

If you upgrade to the latest one, you can not downgrade to the previous one anymore.

Andy posted the latest one a while back, but after many comments, including myself, about issues, he removed the link again to prevent more users from having the same problems.
Click to expand...

Thanks for the heads up! Which version would you recommend then as stable at the moment? I have IPC-HDW4231EM-ASE by the way.
 
Notrial said:
Thanks for the heads up! Which version would you recommend then as stable at the moment? I have IPC-HDW4231EM-ASE by the way.
Click to expand...

The one that worked best for me, on my HDW5231R-ZE, was:

General_IPC-HX5X3X-Rhea_Internal_PN_Stream3_V2.640.0000002.0.R.180523
 

Attachments

EMPIRETECANDY said:
This firmware have a latest new version, a firmware at Jan. 2019, some guys already got cameras with the latest new firmware, i will post it here very soon. ipct always the latest new firmware, lol.
Click to expand...

@EMPIRETECANDY Andy, just wondered if you had an update (or a link) to any new 2019 FW for the 5231R-ZE or 5231E-Z12E ? Thanks
 
will post a 20181226 hours later, i tested this firmware yesterday, all good, the Jan firmware has bug.
 
EMPIRETECANDY said:
will post a 20181226 hours later, i tested this firmware yesterday, all good, the Jan firmware has bug.
Click to expand...

Thanks @EMPIRETECANDY is that the v2.800 build ? If so I have that on my Z12E and am experiencing disconnects. Happy to refresh it if you post the link as you mentioned but just wanted to let you know I've seen some issues with that one recently. Thanks again
 
This firmware already used on the orders from Jan. Seems good.
 
EMPIRETECANDY said:
This firmware already used on the orders from Jan. Seems good.
Click to expand...
Thanks Andy can you post the link to that new FW again, I will re-flash and see if that helps. I can see the cam go offline in multiple ways, doesn't respond to ping, offline gaps in NVR etc etc so definitely something going on that I will investigate further
 
OK, you can check tomorrow morning when you back.
 
You must log in or register to reply here.
Top Bottom