Also want you to know I had great dreams last night thanks to you and rafale I love success stories. So to date, on this Thread, we have only had one brick, and in my opinion, we might of been able to save that one but they had to return it within 30 days. We never tried the one hour/no power reset trick that we actually found out later works.FINALLY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I swear i tried that password a few times
Yeah, I have seen that flash by too. I just figured since batch tool is for all Hikvision cameras, not all the options are available on ours, but they could be and our firmware just prevents us from changing too much.Noticed Batch config tool and the other hik app has more options but they get hidden after a few seconds.
Also noticed upnp and multicast settings are different which may explain why google cast or Alexa support work on day Nellys firmware.
View attachment 53751
Definitely plan to add this great work around/fix to the 101 in the Troubleshooting Tip section. Thanks again for coming to our rescue...Here is how I worked around this:
Use a PC or a mac to login to the doorbell’s wifi. Make sure that you disabled your pc’s ethernet connection to avoid Confusing IP ranges.
You should be using the laview_code as the wifi password.
Once you are in, use the iVMS4200 software to modify the SSID of the doorbell back to the ezviz_serial.
You should then be able to move on with the mobile app inclusion.
Technically what I did was another shortcut. I used the iVMS4200 software to get the doorbell to join my wifi network directly. Yes it can do that... Then my mobile app software didn’t even have to try to find the doorbell’s SSID and skept directly to the rest of the doorbell configuration, only asking for the doorbell’s admin password to login to the doorbell.
Are you talking a new install , First time? If so, what Doorbell/brand do you have? What Firmware?Hi,
I am playing with this one now & read the troubleshooting. Do i need to use the app to setup the device or can i login to the device wifi & use the IVS software to add it to my wifi?
To confirm, once the admin password is set with the iVMS software (admin, password device doorbell password) dont change the IVMS password ever?
Last - Nelly's firmware or La?
⦁ If you are unable to get your Doorbell to Reset, Remove Power from the Doorbell (Breaker or physically disconnecting Doorbell from Power) for at least One Hour. The Doorbell has an internal battery that needs to drain enough to properly do a Full Reset. - VorlonFrog - Tomgar - NickTheGreat, NickTheGreatI just bought the RCA version and tried to flash Nelly's firmware on it using the batch config. It said it was successful and was rebooting but this actually bricked the camera.
The doorbell button is solid red, reset button does nothing as well as power cycling. I tried loading the digicap.dav file directly onto a reformatted (FAT32) SD and rebooting in hopes that it would load the firmware as some others have suggested and still no change in behavior. Anyone else run into this issue or have some suggestions on what else to try?
⦁ If you are unable to get your Doorbell to Reset, Remove Power from the Doorbell (Breaker or physically disconnecting Doorbell from Power) for at least One Hour. The Doorbell has an internal battery that needs to drain enough to properly do a Full Reset. - VorlonFrog - Tomgar - NickTheGreat, NickTheGreat
Have you tried power off one hour, no SD Card? We are not sure the firmware on the SD Card works for this Doorbell, the help .pdf was shared by a user here but the .dav on the SD Card was not confirmed and it list a Video Intercom for the product/device.I've done this 3 times already. Camera turns on with solid red button and does nothing else. My understanding is that the .dav should get extracted into multiple .bin files once the camera boots and installs the firmware from the SD card.... this isn't happening. I've also tried the reset button every time I've tried a reboot and still no luck.
Have you tried power off one hour, no SD Card?
Sorry for all the questions but did you make note of which RCA firmware you had prior to changing?Twice it was over an hour and once was short of that but the doorbell had only been on for a few mins so did not have much of a charge and died within a minute. Each time the camera was completely off before powering on again. I have not tried booting without the SD card, I guess I can give that a shot. I tried two different firmwares, one from Nelly and the other from EZVIZ.
Sorry for all the questions but did you make note of which RCA firmware you had prior to changing?
No problem, I did add a statement in the 101 for future users to make sure to Note their firmware prior to upgrading, thank you.Unfortunately I did not. It was new out of the box when I got it and once I had it connected to the RCA app it prompt me to update the firmware. I updated it and the RCA app then showed it was on currently release but I did note take note of the version. At this point I used the batch tool in an attempt to load Nelly's firmware for ONVIF support.
FINALLY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I swear i tried that password a few times
Definitely plan to add this great work around/fix to the 101 in the Troubleshooting Tip section. Thanks again for coming to our rescue...
Looking forward to your write up. Or if you need me to I can write it up.
Thanks,
David
Get any further? If you are within your return period you may want to not go any further and just return it. If not, no big deal, we all have a year warranty on these so you can RMA.Unfortunately I did not. It was new out of the box when I got it and once I had it connected to the RCA app it prompt me to update the firmware. I updated it and the RCA app then showed it was on currently release but I did note take note of the version. At this point I used the batch tool in an attempt to load Nelly's firmware for ONVIF support.
Excellent write-up...We all here and future members Thank You...On oddity is that the brand of the doorbell you bought will want to be bound to its branded mobile app.
After a “non-native” firmware upgrade, you may end up having problems reconfiguring/re-adding the doorbell after a reset as the SSID of the doorbell will now follow the prefix of the brand of the firmware you are using which is not corresponding to the mobile app you initially used. You could then use the mobile app corresponding to the new firmware you are using but the QR code may then not match... problem.
The solution is to use a PC or a MAC with iVMS4200 installed (can be laptop or desktop as long as it has wifi).
1. Disable the PC or Mac’s ethernet interface to make the IP discovery easier.
2. From you wifi menu, after the doorbell has been reset, you should see an SSID from the doorbell. It should show “brandprefix_Serialnumber” as the SSID. Try joining that network.
3. You mac or PC will prompt you for a wifi password which should be “brandprefix_6lettercode”. Replace the brandprefix with the one from the SSID. It could be Laview, EZVIZ, RCA etc... and replace the 6 letter code with the password provided on the QR code sticker for the camera.
4. Once you have successfully connected to the doorbell’s wifi, your wifi interface should have been assigned a DHCP IP address. You can now discover the doorbell using iVMS4200.
5. Make sure once again to not activate the camera or change any passwords... Instead login to the camera using the username “admin” and the password “6 letter QR Code” and go into the wifi section of the menu. From here you can get the camera to discover wifi network and get it to join your wifi network using your home SSID and wifi password.
6. Once this is done, you can now go back to your phone/tablet and use any mobile app to continue setting up your doorbell which will skip through the wifi setup section.
Can you confirm this to be True?On oddity is that the brand of the doorbell you bought will want to be bound to its branded mobile app.
After a “non-native” firmware upgrade, you may end up having problems reconfiguring/re-adding the doorbell after a reset as the SSID of the doorbell will now follow the prefix of the brand of the firmware you are using which is not corresponding to the mobile app you initially used. You could then use the mobile app corresponding to the new firmware you are using but the QR code may then not match... problem.
The solution is to use a PC or a MAC with iVMS4200 installed (can be laptop or desktop as long as it has wifi).
1. Disable the PC or Mac’s ethernet interface to make the IP discovery easier.
2. From you wifi menu, after the doorbell has been reset, you should see an SSID from the doorbell. It should show “brandprefix_Serialnumber” as the SSID. Try joining that network.
3. You mac or PC will prompt you for a wifi password which should be “brandprefix_6lettercode”. Replace the brandprefix with the one from the SSID. It could be Laview, EZVIZ, RCA etc... and replace the 6 letter code with the password provided on the QR code sticker for the camera.
4. Once you have successfully connected to the doorbell’s wifi, your wifi interface should have been assigned a DHCP IP address. You can now discover the doorbell using iVMS4200.
5. Make sure once again to not activate the camera or change any passwords... Instead login to the camera using the username “admin” and the password “6 letter QR Code” and go into the wifi section of the menu. From here you can get the camera to discover wifi network and get it to join your wifi network using your home SSID and wifi password.
6. Once this is done, you can now go back to your phone/tablet and use any mobile app to continue setting up your doorbell which will skip through the wifi setup section.
Can you confirm this to be True?
If are needing/wanting to go back through the Doorbell Setup/Install process by Resetting your Doorbell and have upgraded your firmware to another firmware brand other than your Doorbell's brand, it is best to upgrade back to your brand's firmware before Resetting your Doorbell.