So I don't know if this helps since I do not have a NVR, but here are my Blue Iris settings in which I am streaming 24/7 to from the Doorbell.Hey Everyone
New here and looking for help connecting my EZVIZ version to my LTS NVR which has two hard wired LTS cameras connected. I'm going through the Custom Adding on the NVR and thinking I am not doing something correctly, just not sure which part.
I confirmed via VLC that I can see the rstp stream (rtsp:/admin:**@192.168.1.181/Streaming/Channels/101/) so I know the live feed is accessible over network. When in the Custom Adding box, I'm entering the 192.186.1.181 as IP address, Default as Protocol (thats the only option) but wondering if I'm not using the Port number correctly. When I use port 8000, the NVR is able to see the model number, firmware version etc of the doorbell so I think it's seeing the doorbell, but I'm unable to generate a live feed. I've tried using port 554 (and 8554) but that makes things worse, just no connection and doesn't read the model number.
I've tried searching this forum, downloaded all the product manuals, but can't seem to figure out how to go about generating a live feed that the NVR can record. Any help greatly appreciated, and apologies for the novice question.
The difference is my LaView Doorbell firmware has ONVIF support. I know there have been others who could not get their DB to stream to their NVRs without upgrading their DB firmware to either LaView or Nelly's (ONVIF) supported. See Doorbell 101
Can you ping the DB from your NVR?