My understanding of Reolink cameras is to never use RTSP, period, unless you have to. HTTP FLV over RTMP is the way to go with specific arguments in place if possible also.
Since I abandon RTSP a few days ago I have had ZERO signal losses...prior to the change to RTMP I was getting over 100 a day at times...
I am new to Reolink but Dahua does not have a good POE Doorbell solution for me in my price range. You would have to pry my Dahua CAMs out of my hands, they are not going anywhere, by far they are the best I have experienced/seen. I have had comments from family/friends stating our Dahua video feed is much better than what they have at their work building's security.
Look how dark it is outside, but these CAMs rock in low light, I have the Front one on Day mode only, no need for IR.
My Backyard CAM is in need of an additional
IR light on the West side of my house, I have the IR Illuminator on the CAM turned down to get perfect facials.
Dahua IPC-T5442TM-AS 2.8mm Fixed Lens CAM:
Dahua IPC-T5442TM-AS 3.6mm Fixed Lens CAM:
This is how dark it actually is outside (pic taken from my Samsung S20+ phone). If you look behind our tree you see the street light, there is another one further down the cross street, look behind our neighbor's tree corner house across from our house.
I only have a 60 Watt bulb for our porch light, may replace with a 40 Watt...
Thinking I better include my LaView (DB1 variant) Doorbell feed too, since this is a Doorbell CAM Thread: