PTZ fails after firmware update

ptz kamerayı güncelleme yaptım ve ptz artık çalışmıyor
satıcı şu kimlik
bunlar yükleniyorlar ama sorun düzelmiyor
senin dosya arşivindekileri yükledim hata veriyor.

eski firmware tarihini değiştirerek yapılabilir yapılabilir mi?


translate.google.com

Ptz kamerayı güncelledim ve ptz artık çalışmıyor Satıcı aşağıdaki dosyaları gönderdi

yüklüyorlar ama sorun çözülmedi Dosya arşivinizin içeriğini yükledim, hata veriyor. Eski bellenim dosyasının tarihini değiştirerek kurmak mümkün mü?
 
[QUOTE = "logoaki, gönderi: 513882, üye: 113572"]
burada da aynı problem
[/ALINTI]
Benim problemim çözülmedi daha Oleglevsha çözülebilir 10 usd bağış istedi.
Şuan satış anlaşmazlık iade edip paramı alabilirim iade kargo ücreti çok tutacağı için göndermeyi düşünmüyorum.
bu sitede eski sürüm üretici yazılımı mevcut bana faydası olmadı
559cd 2020.07.04
 
  • Like
Reactions: logoaki
I wrote earlier that in order to get help with firmware recovery, you need to meet several conditions.
1. take a screenshot of the software version and specify the serial number of the device.
Better in a private conversation
2. If we can help you, I will tell you the details for making donations, 10$
3. Turn on your IP camera and provide it with Internet access to perform a firmware update
You can join our community and become a participant in the discussion or development of open source software for IP cameras, OpenIPC - Open Collective
 
Oleglevsha said:
I wrote earlier that in order to get help with firmware recovery, you need to meet several conditions.
1. take a screenshot of the software version and specify the serial number of the device.
Better in a private conversation
2. If we can help you, I will tell you the details for making donations, 10$
3. Turn on your IP camera and provide it with Internet access to perform a firmware update
You can join our community and become a participant in the discussion or development of open source software for IP cameras, OpenIPC - Open Collective
Click to expand...
Oleglevsha problemi çözdü teşekkürler
 
deniseg2k said:
Also lost PTZ after auto update firmware, as many of you :)
The camera Model nz4rn-33718
System V5.00.R02.000559CD.10010.040300.0020010
The seller send me a firmware Файл из Облака Mail.ru
Now camera is working fine!
Click to expand...
Many thanks my friend. Less one problem.
My camera's infrared sensor turns the image red. In the settings it is not possible to change the option to black and white or color. Did you have the same problem?
 
logoaki said:
Many thanks my friend. Less one problem.
My camera's infrared sensor turns the image red. In the settings it is not possible to change the option to black and white or color. Did you have the same problem?
Click to expand...
Both my ptz cameras started with this problem, thats when I made the mistake of letting them both update, the pink tint comes and goes randomly occassionally . One camera was fixed instantly with the original firmware but has come back recently, the other was pink with IR after the correct firmware was installed. The pink IR went on it's own and hasn't come back on camera 2. Bizzaar
 
  • Like
Reactions: logoaki
Can you tell me how to turn off the infrared at night since leaving it on makes the cctv extremely hot. All 8 of its ir are on instead of 4. The model is nz4rn 34718. There is no option in my nvr.
 
kram1586 said:
Can you tell me how to turn off the infrared at night since leaving it on makes the cctv extremely hot. All 8 of its ir are on instead of 4. The model is nz4rn 34718. There is no option in my nvr.
Click to expand...
Same problem here. The NVR has the option to change the IR, but it does not work with this camera.
 
You must log in or register to reply here.
Top Bottom