2ndLeaf
Young grasshopper
Thanks a lot for the information. IVS comes back after disabling smart codec.disable smart codec if you have disappeared IVS
Thanks a lot for the information. IVS comes back after disabling smart codec.disable smart codec if you have disappeared IVS
Hi, new to the forums here. I've been lurking for a while though . I purchased a Dahua branded SD-49225XA-HNR and 4208-8P-4KS2(GUI4.0) NVR as my first camera system for my house with a Microseven M7WP-MIC. Before mounting I tested everything out, all features were working including the AI functions (Face Detection etc) the audio from the microphone was fantastic as well, I can hear everything going on all around. After mounting everything, running the cables I realized that the Deep IVS tab is not present again when I log into the Camera itself and through the AI>Parameters on the NVR the AI functions are not selectable, including not being able to set up a Smart Plan. I was able to set up Presets for the Tour feature and add in Tripwire and Intrusion triggers via the camera's homepage, but I can't set up different Smart Plans (namely IVS, Face Detection, Metadata) again. I have not updated the camera nor NVR. I DO have it running on H.265 and the Smart Codec checked. These options worked before, I'm not sure if after enabling the Smart Codec things changed.disable smart codec if you have disappeared IVS
Turn off Smark Codec and access the camera thru the GUI.
And read this... ***PSA for those with a New DAHUA NVR with Built-in PoE switch
Wow thanks alot for the speedy replies! I tried it and it worked! Since I've disabled the smart codec however, would I notice an impact storage wise?Smart Codec disables IVS. have to choose
Awesome! Great advice. Yeah storage is pretty cheap. Thanks for the insight I'll definitely do that.Storage is cheap. Invest in more and run 24/7 recording in addition to IVS events.
Trust me that MANY folks have come here with the idea they only need to record motion, almost always they eventually see the light that 24/7 recording is far better. Things happen before/after a motion event and even outside of your defined event trigger area that can be important.
Can you remind me what is the 4MP model number to which you are referring? Is it the SD5A425XA-HNR or something else? The 4MP model didn't have the issue where Dahua disabled auto-tracking after release, right?I posted back on page 42 that I purchased the 4MP version from @EMPIRETECANDY and how incredible it is right out of the box.
Can you remind me what is the 4MP model number to which you are referring? Is it the SD5A425XA-HNR or something else? The 4MP model didn't have the issue where Dahua disabled auto-tracking after release, right?
How is 49425 in comparison? It is not much more expensive. Almost same price.
Lower light Performance I imagine and more pixels not needed because 25x zoom ?To be honest I’m not a fan of that config (49425). 49225 or 5A425 are my reco’s @Warptrooper
Lower light Performance I imagine and more pixels not needed because 25x zoom ?
There is actually not a huge difference in low-light between them, There will be a difference of-course, I have went for the 4MP (49425) For the simple reason that the PTZ will be the only camera covering the front of my property & thus I needed high MP when fully zoomed out as that is what it will be mostly preset to until it autotracks something, I guess it all depends on your own purposes but from the videos I have seen there is not a huge difference but if your working with very low light conditions the 2 MP version is going to treat you much better at night.How is 49425 in comparison? It is not much more expensive. Almost same price.
So what were the settings that he changed that you thought were the opposite? Just curious and I realize that different lighting may change things but would be nice to get some actual feedback on what settings were being changed.I posted back on page 42 that I purchased the 4MP version from @EMPIRETECANDY and how incredible it is right out of the box.
I had tried some tweaks and thought I had it pretty good but sent a clip to @Wildcat_1 to see his thoughts. He made a few suggestions and improved it greatly and offered to jump onto the camera to tweak it some more.
All I can say is WOW. He has a reputation on this site of getting the most out of the cameras, and he doesn't disappoint. He knows every little trick, and many of them are opposite what you would think trying to set it up. This thing is so many times more better now, and I was generally pleased with it before he jumped on and made some tweaks.
The night image and tracking was what I felt was lacking in my setup. He offered to jump on it during the day and during the night and the improvement he made during the day was incredible. He was making it do what I wanted it to do but I couldn't get it there. The night is decent but we both agreed it could be better and he offered some light suggestions to try and then we will take another look at it. He also offered a few other suggestions to get the most out of my entire system.
What incredible resources we have on this forum. If he offers to jump on your system to help you out, I cannot recommend enough to take him up on his gracious offer - you will not be disappointed.