VTO2000A new V4 firmware

Hi my friends
I need the latest complete firmware for 1550CH:

General_VTH151X_Eng_SIP_V4.300.0000000.8.R.20190316.bin

PLEASE share the complete zip file.
If it is possible, share it via www.wetransfer.com

So many thanks
 
misterspip said:
Hello

I just upgraded my VTO2000a / VTH1560 / VTH1550CH with the below firmware kindly provided by fa355115
- VTH151X_EngItlFrnGerDutSpnPrt_V4.000.100B000.0.T.20180906
- VTOXXX_EngItlFrnGerDutSpnPrt_P_16M_V3.120.001P000.0.T.20181025

But now the VTH don't connect to the VTO anymore, while if I add the VTO as an IPC in the VTH I can get the video.

Could someone help me reconfiguring it ?

Btw, I also noticed that on the VTH there's no "project" settings anymore.

Best regards,
Fred.
Click to expand...
VTO/VTH shall be same firmware V3.1 or new version V4.3.
 
Latest and greates FW updates for VTO and VTH's (WebIf V2.0 / SIP / v4.3) from this site

Multilanguage addon for VTO's General_VTOXXX-data_EngDthFrnGerItlPorSpa_P_16M_SIP_PART_V4.300.0000001.0.R.20190322
Multilanguage addon for VTH's VTH 201903

According to Install file in firmware binary VTOxxx is suitable for
Code: 
   "Devices" : [
      [ "VTO1210A-X", "1.00" ],
      [ "VTO1210B-X", "1.00" ],
      [ "VTO1210C-X", "1.00" ],
      [ "VTO1220A", "1.00" ],
      [ "VTO1220B", "1.00" ],
      [ "VTO6110B", "1.00" ],
      [ "VTO6000C", "1.00" ],
      [ "VTO6100C", "1.00" ],
      [ "VTO6100C", "1.10" ],
      [ "VTO6100C", "1.20" ],
      [ "VTO6210B", "1.00" ],
      [ "VTO6210B", "1.10" ],
      [ "VTO2000A", "1.00" ],
      [ "VTO2000A", "1.10" ],
      [ "VTO2000A", "1.20" ]
   ]
VTH image for
Code: 
   "Devices" : [
      [ "VTH1510", "1.10" ],
      [ "VTH1510", "1.20" ],
      [ "VTH1510CH", "1.10" ],
      [ "VTH1510CH", "1.20" ],
      [ "VTH1510CH", "1.50" ],
      [ "VTH1510CH", "1.60" ],
      [ "VTH1510CH", "1.90" ],
      [ "VTH1510CH", "2.00" ],
      [ "VTH1510CH", "2.30" ],
      [ "VTH1510CH", "2.40" ],
      [ "VTH1660CH", "1.10" ],
      [ "VTH1660CH", "1.20" ],
      [ "VTH1550CHW-2", "1.10" ],
      [ "VTH1550CHW-2", "1.20" ],
      [ "VTH52X1D", "1.10" ],
      [ "VTH52X1D", "1.20" ],
      [ "VTH5221D", "1.10" ],
      [ "VTH5221D", "1.20" ],
      [ "VTH1560B-W", "1.10" ],
      [ "VTH1560B-W", "1.20" ],
      [ "VTH5241D", "1.10" ],
      [ "VTH5241D", "1.20" ],
      [ "VTH5222CH", "1.10" ],
      [ "VTH2201D", "1.00" ],
      [ "VTH2221A", "1.10" ],
      [ "VTH2221A", "1.50" ],
      [ "VTH2221C", "1.10" ],
      [ "VTH2221C", "1.50" ],
      [ "VTH2221C", "1.20" ],
      [ "VTH5221E", "1.00" ],
      [ "VTH2221C", "2.10" ],
      [ "VTH2221C", "2.50" ],
      [ "VTH2221C", "2.20" ],
      [ "VTH52X1D", "2.10" ],
      [ "VTH52X1D", "2.20" ],
      [ "VTH5221D", "2.10" ],
      [ "VTH5221D", "2.20" ],
      [ "VTH5241D", "2.10" ],
      [ "VTH5241D", "2.20" ],
      [ "VTH5221E", "2.00" ]
   ]
 
Last edited:
  • Like
Reactions: _lucas_
I flashed my VTH-1560B and VTH-1550CH with latest firmware VTH 201903 (from the link here above) but both failed and got bricked. I had to use the TFTP method to get them back alive.

Does anybody knows which SIP firmware support my VTH ?

Best regards
 
What FW did you install to get it running again? Can you post your MCU version - maybe you have to upgrade this as well.
I got pos. feedback from a VTH1550CH user and also, if FW would not "fit" your device you would not be able to flash it with VDPconfig.
 
I flashed them back with : Customer_VTH151X_EngItlFrnGerDutSpnPrt_V4.000.100B000.0.T.20180906.bin

How can I get the MCU version of the VTH ?


riogrande75 said:
What FW did you install to get it running again? Can you post your MCU version - maybe you have to upgrade this as well.
I got pos. feedback from a VTH1550CH user and also, if FW would not "fit" your device you would not be able to flash it with VDPconfig.
Click to expand...
 
How can you flash a whole VTH with the multilang. addon? Didn't you flash General_VTH151X_Eng_P_V4.000.0000.0.R.20180622 before?

See my link (firmware link collection) above for MCU.
 
Last edited:
I was able to upgrade the MCU to General_VTH15X0CH-6_ENG_MCU_STM8S003K3_V8.000.0000.0.R.170825
But upgrading to SIP firmware failed again "Config result : Failed to upgrade", so VTH bricked again.
 
The firmware was flashed correctly and the VTH now show a SIP tab in the config menu :) Still have to configure it.

Do you mean I could you the vth5221d_4_3_multilanguage_file.bin on top of the General_VTH151X_SIP_V4.300.00000000.8.R.20190316.bin ?

Thanks for the help


riogrande75 said:
Give it a try with this one as a base before flashing the multilang addon:
General_VTH151X_Eng_SIP_V4.300.0000000.8.R.20190316

If it fails, pls. let me know if the firmware or the addon causes the trouble.
Click to expand...
 
  • Like
Reactions: _lucas_
Hello everyone from Spain

amazing forum.

I have vto2000a ..... updated with the firmware above to Spanish.

vth1510ch-s1 of factory sip2.0 in English ..... pending to see if the partner managed to go to Spanish mixing firmware.

when I said it was locked I jump my alarm and look at the methods to recover

it cost me a lot for the vth to connect to the vto and now I install everything permanently
I will be in the forum since I intend to unify everything with home asistant.
 
Hi.
I have vth1510ch and I would like to agegar 3 cameras ip sricam sp007 but I can not see anything but black on the screen.
can someone give me the correct configuration?
just let me enter numbers so I can't put in rtsp.
any ideas?
 
riogrande75 said:
Give it a try with this one as a base before flashing the multilang addon:
General_VTH151X_Eng_SIP_V4.300.0000000.8.R.20190316

If it fails, pls. let me know if the firmware or the addon causes the trouble.
[/CITAR]

this is the firmware i have now
2.6.01.18.01737 General_VTH151X_Eng_SIP_V4.300.0000000.8.R.20190316.zip
try to load the languages pack and it gives error

vth5221d_4_3_multilanguage_file.bin.......error
Click to expand...
 
The language pack of the dahua download page only shows the:

875367_General_VTH1510-data_EngTurSlkPldHgrFinCzeBul_P_16M_SIP_PART_V4.300.0000004.0.R.20190612.zip

the same you have in the list of firmwares.

vth5221d_4_3_multilanguage_file.bin is not supported and don't appear on the list
 
Hi,

during trying to load a new FW (from V3.120.102600.0.R.20180620 to "V3.120.0000.0.R.20190222") I bricked by VTO2000A-C: it is booting, but the LED of the nameplates keep on.

Status of the VTO:
it provides answers to PING (192.168.0.107)
PuTTY is not able to connect via Telnet (neither port 22 nor 23).
Portscanner nmap do not find any open port

WHAT can I do?

5x the security switch on the backside doesn't solve it.
ring botton during boot doesn't change anything.
 
There is no way to unbrick your VTO with RS422/RS485 nor with a SD-card.
I would use TFTP method in your situation. There is a very nice thread here describin all neccessary steps.
 
  • Like
Reactions: Grn1z
You must log in or register to reply here.
Top Bottom