I'm glad I held off for now.Alright, for the greater good I took a leap of faith with this one as pozzello and got a similar result, it's obvious firmware is not for IMX322 cams.... I am going to press on them to include at least sensor/chipset combo in the firmware name like Longse been doing.
How can you tell which sensor you have? Is there a program that can read that info from the camera?Here is latest firmware which has date stamp for 6/20 that Jack sent me. I requested it for V2 with IMX322, so make sure you know which one you have. I haven't had a chance to try this out yet and as usual upgrade at your own risk.
EDIT: Removed due to issue bellow
I updated with this firmware, it seems OK.Someone has updated the firmware?
This update has something new ?
Were you streaming camera to a monitor and at same time tried downloading a video file? It could be one reason why it was slow downloading due to bandwidth limitation via camera Ethernet port.im impressed with the last fw i installed in huisun v2 10x.sd card playback is better now.cam overwrites old video data now.plus u can download files to pc.i tried downloading but it looks like it takes forever.
New firmware available. I checked and it appears 60Hz bug related to focus is fixed. Will report if anything else I find
Disclaimer: Update at your own risk, this is only for V2 camera
Program Version V2.0.1 Build 201602010919S
Control Version MiniPtz_V1.0.2_build201601261137
Web Page Version 1.1.1 Build 20151216
Plugin Version 1.0.4.41
In the past 4x and 10x used the same firmware so should be ok, but you know always a chance of bricking. Perhaps check with the seller to confirm. Also if it does brick do not restart the cam. See this thread:I am a little confused so I would like some clarification on this Firmware, I have V2 4X Generation 1 of the Mini PTZ with the black plate in front which is basically unusable at night. Will this Firmware work on Generation 1 V2 4X Mini PTZ?
Thanks in advance.