I've tried and failed multiple times too. Gave up in the end and just use their app locally. But it would be good to actually get this working! I know lots of forums have mentioned this working with frigate but not with BIHas anyone got two-way audio working with the POE doorbell on Blue Iris (5.9.5.4)? I've tried multiple config options (RTSP vs RTMP, back channel vs no back channel) and can't seem to get it working. Ken at BI indicates Reolink removed RTSP back channel from their firmware late last year, but I've read elsewhere they re-added it recently.
- Build No.build 2407315183
- Hardware No. DB_566128M5MP_P
- Config Version v3.0.0.0
- Firmware Version v3.0.0.3308_2407315183
- Details DB_566128M5MP_PS10E1W0111
I have it working in HA with the WebRTC Card (go2rtc) but there's no mute button for the microphone. When the card loads, your voice comes out the doorbell. If you have more than one camera on the dashboard, or you want it on a commonly used dashboard, that's a problem. Ideally, I'd like to have HA for home automation, BI for CCTV.I've tried and failed multiple times too. Gave up in the end and just use their app locally. But it would be good to actually get this working! I know lots of forums have mentioned this working with frigate but not with BI
Sent from my SM-G981B using Tapatalk
Never hurts to reset.Anyone else having a problem, w/ the POE version, on the newest Firmware from this month? I flashed last wed, today is the 2nd time the camea did not automatically switch from night to day. I have to reboot the camera to get the image to switch.
One other question, I did not check the box to Reset configuration, I havn't before on upgrades. Did anyone else? Now I wonder if I need to do a reset.
Thanks,
Michael
I was afraid you'd say thatNever hurts to reset.
I went ahead and did a reset last night. Same issue today, the iR filter is sticking. It will only go into day mode if I reboot the camera.I was afraid you'd say that
Guess I'll do that tomorrow.
Thanks,
Michael
So you had the camera for 6 months and no issues until this formware update?I went ahead and did a reset last night. Same issue today, the iR filter is sticking. It will only go into day mode if I reboot the camera.
Dang the thing is only 6mos old. Guess I'll call Reolink and see what happens. FYI this is the POE version.
Michael