port

  1. A

    How do I move channels?

    I got 6 cameras on a system. #2 is coming blank though there is a connection at port 2. How do I drag #7 to #2?
  2. haselnut

    Need to access cameras behind Dahua NVR

    Hi I have Dahua NVR DHI-NVR4108-8P-4KS2 (firmware V4.001.0000005.1) and 8 Dahua cameras connected to POE ports. NVR has an ip 192.168.1.108, cameras are on different subnet 10.1.1.X managed by the NVR. I am trying to control the LED's on my cameras programmatically instead of the cameras own...
    • haselnut
    • Thread
    • api config dahua forwarding nvr port
    • Replies: 32
    • Forum: Networking
  3. IBNU

    Stream Video from Hkvison Camera into Python Code via a Mobile Network

    Hey everyone I've recently purchased an IP camera and is wondering if I can use it to solve a certain problem. I need to stream the footage from the camera directly into some python code that can process the footage that uses the OpenCV library. The camera will have to be placed in an isolated...
  4. rogerio24

    DAHUA Serial Connection for TTL Converter DHI-XVR4104HS

    Hi Dear Mates .How is it going? I have the DVR stated in the subjet and I would like to know where is located the serial pinout to get access via TTL- Converter. Look these screen and let know where them are located and let me know how to figure out this. Thanks in advance
  5. WA3PNT

    Inbound Port and IP Address Bypass VPN

    I have ExpressVPN running on a WRT1200AC Router. I have a CAM with LAN Address 192.168.0.55 that uses Port 8102. I have setup Weather Cloud (Station WA3PNT) to pull the video from this CAM when the site is accessed. This works fine when the VPN is disabled, however when the VPN is enabled...
  6. dalepa

    SD49225T-HN RJ45 Port replacement?

    Is there a replacement part or the female rj 45 port? Or at least info/pinouts on how to repair port?
    • dalepa
    • Thread
    • port repair sd49225t-hn
    • Replies: 13
    • Forum: Dahua
  7. george dy

    New to IpCams

    Just bought a fixer, had the whole thing wired up with Cat5e and Cat6a from the start! Loving that all my APs and IpCams are where I want them. I wouldn't call myself an enthusiast, but I did wire up 6 HikVision cams (4MP DS-2CD2142FWD-I HD WDR IP Network Dome 2.8mm Len) around the perimeter of...
  8. T

    Amcrest cameras connection dropping

    I have 2 Amcrest IP3M-943W cameras that are connected via Wifi to my Synology NAS (Surveillance System - SS). They keep disconnecting several times per day. I noticed that although my SS says that they are disconnected and I indeed cannot connect to them directly via their webportal, they are...
    • traderr
    • Thread
    • 8000 amcrest coonection drop lose lost port signal wifi wireless
    • Replies: 1
    • Forum: Amcrest
  9. E

    Hikvision DS-7608NI-I2/8P NVR w/ POE can't detect Hikvision cameras

    I got Hikvision DS-7608NI-I2/8P NVR w/ POE running on the latest firmware, 1x DS-2CD2442FWD-IW(PoE 802.3af) and 3x DS-2CD4135FWD-IZ(PoE 802.3af) on the latest firmware. First time doing test I put everything together and managed to have all cameras working through NVR PoE ports. Then left it to...
  10. marigo

    Dahua IPC-HDW4431C-A trying to make outside connection

    Hi all, I have noticed that this IP camera from Dahua is trying to make outside connections to the following ports and IP addresses: 114.55.152.165 9084 TCP 115.29.249.74 8800 UDP Are these connections specific for this camera model or do other camera's from Dahua also trying to make outside...
    • marigo
    • Thread
    • dahua port tcp udp
    • Replies: 22
    • Forum: Dahua
  11. B

    RTSP stream without port number in URL?

    So I got a NIB Honeywell Acuix IP PTZ off of Ebay. It's a nice PTZ camera with 35X zoom that would normally cost lots. I checked the specs. before I bid and it uses RTSP. I cannot get BI to use the correct RTSP stream. I used URL Snooper while accessing the camera's web page and have the...
  12. Mike K

    Computer Ethernet Ports?

    My questions are: 1) If I'm buying a new computer for a new security system with 6 IP cams, (most computers have only one Ethernet port, if any). So is the signal compromised in any way if I use a port hub to interface all 6 cams to access my computer? I noticed that many NVRs have multiple...
  13. R

    Help with port forwarding and DS-2CD2432F-IW

    Router: Netgear R7000 Camera: DS-2CD2432F-IW Camera connected directly to router on IP 192.168.1.12. By typing in 192.168.1.12 I'm able to get to the login screen, login, and use the camera. I forwarded port 192.168.1.12 on my router using same internal/external start port of 5051 and TCP/UDP...
    • raiz
    • Thread
    • ds-2cd2432f-iw forwarding netgear port
    • Replies: 7
    • Forum: Hikvision
  14. S

    SOLUTION-- HTTP not working after port change

    Hi all! Just wanted to pass along a solution I discovered, while dealing with the somewhat infamous bug that disabled my HTTP access after changing the HTTP port (NOT the port shown/set within SADP) Problem: DS-2CD862MF camera is not accessible via HTTP after changing the HTTP port from its...
  15. C

    HikVision Camera+NVR Actual Setup - How To Do?

    Hi, As the title suggests, I am looking as to how I would setup a HikVision Security Camera Network. The products I have are as follows: DS-2CD2132F-IS = 4 Cameras @2.8mm DS-2CD2032-I = 6 Cameras @4mm DS-2CD2032-I = 6 Cameras @6mm DS-77132NI-SP, 32CH NVR = 1 NVR (16 Port PoE Supported) With Cat...
  16. R

    Make DS-2CD2032-I available to the public

    Hi, Please excuse me for asking this question as it must have been asked a 1000 times. I did search this forum but could not find the answer I am looking for... I did manage to open the port on my router and access my camera(s) from the outside. However I still need to enter the username and...
  17. P

    No Signal with Foscam FI9804W

    After spending the majority of yesterday on this, I'm giving up and asking for help--I can't for the life of me figure out what I'm doing wrong! Setting up new Foscam camera and trying to integrate it into Blue Iris. The Foscam set up went fairly smoothly, easily found the camera using the...
Top Bottom