This NVR52XX-4K has new firmware new version is 20170814, anyone want to download, please download here, thank you!
Crazykiller
Getting comfortable
Hopefully my problem with the PTZ control is fixed in this version. I'll give it a try later.
Crazykiller
Getting comfortable
No special words just as below:
DH_NVR5XXX-4K_Eng_V3.215.0000000.0.R.20170814
General_NVR5XXX-4K_Eng_V3.215.0000000.0.R.20170814
Suits models
NVR5208-4KS2,NVR5208-8P-4KS2,NVR5216-16P-4KS2,NVR5216-4KS2,NVR5216-8P-4KS2,NVR5232-16P-4KS2,NVR5232-4KS2,NVR5232-8P-4KS2,NVR5416-16P-4KS2,NVR5416-4KS2,NVR5432-16P-4KS2,NVR5432-4KS2,NVR5464-16P-4KS2,NVR5464-4KS2,NVR5816-16P-4KS2,NVR5816-4KS2,NVR5832-16P-4KS2,NVR5832-4KS2,NVR5864-16P-4KS2,NVR5864-4KS
DH_NVR5XXX-4K_Eng_V3.215.0000000.0.R.20170814
General_NVR5XXX-4K_Eng_V3.215.0000000.0.R.20170814
Suits models
NVR5208-4KS2,NVR5208-8P-4KS2,NVR5216-16P-4KS2,NVR5216-4KS2,NVR5216-8P-4KS2,NVR5232-16P-4KS2,NVR5232-4KS2,NVR5232-8P-4KS2,NVR5416-16P-4KS2,NVR5416-4KS2,NVR5432-16P-4KS2,NVR5432-4KS2,NVR5464-16P-4KS2,NVR5464-4KS2,NVR5816-16P-4KS2,NVR5816-4KS2,NVR5832-16P-4KS2,NVR5832-4KS2,NVR5864-16P-4KS2,NVR5864-4KS
Crazykiller
Getting comfortable
I don't know why Dahua could not be a bit more communicative
Even with the 2017-04-18 Firmware you had to find out yourself what's changed... for the NVR4xxx (lite version) there's a release note PDF with new features etc.
Anyway, thanks for your notes... i just flashed it into my NVR and will see what changed to the release from 2017-04-18.
i will ask them to get the release note and paste here.I don't know why Dahua could not be a bit more communicative
Even with the 2017-04-18 Firmware you had to find out yourself what's changed... for the NVR4xxx (lite version) there's a release note PDF with new features etc.
Anyway, thanks for your notes... i just flashed it into my NVR and will see what changed to the release from 2017-04-18.
Release Note:
1. Joint safety baseline phase II
2. Increase the cloud upgrade function
3. Added optimization pos function
4. Fix bad block problems with Flash
5. Optimize the solution to memory leaks
6. Optimize the repair of fish-eye related issues
7. Fix the rollover switch to skip the problem
8.POE initialization program modification
9. Fix the front panel key crashes
1. Joint safety baseline phase II
2. Increase the cloud upgrade function
3. Added optimization pos function
4. Fix bad block problems with Flash
5. Optimize the solution to memory leaks
6. Optimize the repair of fish-eye related issues
7. Fix the rollover switch to skip the problem
8.POE initialization program modification
9. Fix the front panel key crashes
Crazykiller
Getting comfortable
As far i could tell for now, it runs stable since a few hours for me. The bug that you can't control multiple PTZ if you are using a app like SmartPSS or *DMSS is fixed. I'm able again to control all PTZ after selecting them.
Also it is now possible to add license plates with more then six characters in the black-/whitelist. But it seems it's only usable for configuring a cam which supports that feature. So it does not save different settings for different channels in my testing. This behavior was the same prior to this firmware.
Seems the IVS Settings don't like my chinese domestic HDBW4431R-ZS. Whether rules which are configured in the cam are viewable in the NVR, nor it is possible to add new rules from the NVR WebUI. All other channels seem to work.
Also it is now possible to add license plates with more then six characters in the black-/whitelist. But it seems it's only usable for configuring a cam which supports that feature. So it does not save different settings for different channels in my testing. This behavior was the same prior to this firmware.
Seems the IVS Settings don't like my chinese domestic HDBW4431R-ZS. Whether rules which are configured in the cam are viewable in the NVR, nor it is possible to add new rules from the NVR WebUI. All other channels seem to work.
Last edited:
ChooChooman74
Getting the hang of it
Is there an update to these NVRs?
My issue, I can not configure using the web GUI. Everthing is blank.
Thank you Andy. Going to try it out now on mine before I do it on customers.
My issue, I can not configure using the web GUI. Everthing is blank.
Last edited:
Will post the latest new firmware on the forum, esp for those have bugs, Just let me know if need any other firmware, i have a FTP so can download anytime.
ChooChooman74
Getting the hang of it
Ok, my issue is that I can not do anything on the Web GUI.
Attachments
cyberwolf_uk
Getting comfortable
- Sep 27, 2014
- 631
- 797
I had something similar on a camera once, clearing the web browser cache cured it... Maybe worth a try.
ChooChooman74
Getting the hang of it
cyberwolf_uk
Getting comfortable
- Sep 27, 2014
- 631
- 797
Glad it worked, And thanks @ChooChooman74 and @Crazykiller for testing this new firmware... Will hold on and wait until you guys have tested it a bit more, if you could report back any issues / enhancements 
Crazykiller
Getting comfortable
Glad it worked, And thanks @ChooChooman74 and @Crazykiller for testing this new firmware... Will hold on and wait until you guys have tested it a bit more, if you could report back any issues / enhancements
For now it works. The only really sad thing for me was, that I could not import my backed up settings. So after factory reset I've got to configure everything from scratch now
Maybe my backup is faulty or it is not possible between the version. Maybe someone else could verify.
I did the update, didn't save or try to update my settings. Everything is as it was before the update. But I did not do a factory reset.
Joe
Joe
So is this the update that blocks the Chinese cameras?? @Crazykiller you said your Chinese camera doesn't work properly anymore? Could you elaborate?