Introduction Post

hugmatj

n3wb
Mar 21, 2020
1
2
US
I've never done one of these -

First off - thanks to the mods/admin/site runners/community for providing a space with such useful information.

This site is a resource that the internet would be a lesser place if not for its existence.

Grats-

Regarding myself - I'm a networking geek. I enjoy making things communicate that likely were never intended to.

Recently a friend introduced me to the joys of home security via his secondhand equipment with the challenge: "You'll never be able to get this device connected in such a way that I can look at it on my phone while I'm at work."

Some time later and...

I'm waiting on a USB to TTL cable and digging through boxes for a 4 pin connector for a locked Hikvision NVR.
Figuring out how deep direct burial actually means.
While waiting on shipping, looking for a pin out for Samsung cameras with RJ-11e ports.

By god, I'm gonna stick those suckers into something.
 
:welcome:
What type of camera are you trying to connect.
DO NOT OPEN PORTS IN YOUR ROUTER.

-------------------------------------------
My standard welcome to the forum message.

Please read the IP Cam Talk Cliff Notes and other items in the IP Cam Talk Wiki. (read on a real computer, not a phone). The wiki is in the blue bar at the top of the page.

Read How to Secure Your Network (Don't Get Hacked!) in the wiki also.


Quick start
1) If you do not have a wired monitored alarm system, get that first
2) Use Dahua starlight cameras or Hikvision darkfighter cameras if you need good low light cameras.
3) use a VPN to access home network (openVPN)
4) Do not use wifi cameras.
5) Do not use cloud storage
6) Do Not use uPNP, P2P, QR, do not open ports,
7) More megapixel is not necessarily better.
8) Avoid chinese hacked cameras (most ebay, amazon, aliexpress cameras(not all, but most))
9) Do not use reolink, ring, nest, Arlo cameras (they are junk), no cloud cameras
10) If possible use a turret camera , bullet collect spiders, dome collect dirt and reflect light (IR)
11) Use only solid copper, AWG 23 or 24 ethernet wire. , no CCA (Copper Clad Aluminum)
12) use a test mount to verify the camera mount location. My test rig: rev.2
13) (Looney2ns)If you want to be able to ID faces, don't mount cams higher than 7ft. You want to know who did it, not just what happened.
14) Use a router that has openVPN built in (Most ASUS, Some NetGear....)
15) camera placement use the calculator... IPVM Camera Calculator V3
16) POE list PoE Switch Suggestion List
17) Camera Sensor size, bigger is general better Sensor Size Chart


Cameras to look at
IPC-T5442TM-AS-LED . Review IPC-T5442TM-AS-LED (Full Color, Starlight+) - 4MP starlight
.................... Dahua IPC-T5442TM-AS-LED review
IPC-T5442TM-AS ..... Review-OEM 4mp AI Cam IPC-T5442TM-AS Starlight+ - 4MP starlight+
IPC-B5442E-ZE ...... Review - OEM IPC-B5442E-ZE 4MP AI Varifocal Bullet Camera With Starlight+
IPC-T2347G-LU ...... Review of the Hikvision OEM model IPC-T2347G-LU 'ColorVu' IP CCTV camera. (DS-2CD2347G1-LU)
IPC-HDW2231R-ZS .... Review-Dahua IPC-HDW2231RP-ZS Starlight Camera-Varifocal
IPC-HDW2231T-ZS-S2 . Review-OEM IPC-T2231T-ZS 2mp Varifocal Starlight Camera
IPC-HDW5231R-ZE .... Review-Dahua Starlight IPC-HDW5231R-ZE 800 meter capable ePOE
IPC-HFW4239T-ASE ... IPC-HFW4239T-ASE
IPCT-HDW5431RE-I ... Review - IP Cam Talk 4 MP IR Fixed Turret Network Camera
IPC-T5241H-AS-PV ... Review-OEM IPC-T5241H-AS-PV 2mp AI active deterrence cam
DS-2CD2325FWD-I
N22AL12 ............ New Dahua N22AL12 Budget Cam w/Starlight -- low cost entry

Other dahua 4MP starlight Dahua 4MP Starlight Lineup

My preferred indoor cameras
DS-2CD2442FWD-IW
IPC-K35A Review-Dahua IPC-K35A 3mp Cube Camera

If interested in Blue Iris and other setup items see the following post


Read,study,plan before spending money ..... plan plan plan
Test do not guess
 
a locked Hikvision NVR
Depending on the model of NVR and availability and firmware version of Hikvision cameras, you might find this quite fun :

Or this, if you want to mess with the serial TTL convertor :
 
Hello, welcome to the forum.