Форум не русский, но здесь есть пользователи из России. Спешу поделится опытом. После автоматической прошивки камеры из этого магазина
перестал работать PTZ управление. Самостоятельные поиски прошивки не увенчались успехом, тогда я обратился к продавцу и тот практически мгновенно ответил мне и выслал прошивку. Мое устройство имело данную прошивку: V5.00.R02.000559B0.10010.040300.0020010 (ключевой номер 000559B0, бывают еще 000559CD , но это модель 2020 года). Сразу после установки прошивки проблема не решилась и управление камерой не работало, а вот после сброса настроек по умолчанию всё заработало, отмечу , что ip адрес был сброшен в режим автоматического получения.
The forum is not Russian, but there are users from Russia. I hasten to share my experience. After automatically flashing the camera from this store
PTZ control stopped working. Independent searches for the firmware were not successful, so I turned to the seller and he almost immediately answered me and sent the firmware. My device had this firmware: V5.00.R02.000559B0.10010.040300.0020010 (key number 000559B0, there are also 000559CD , but this is a 2020 model). Immediately after installing the firmware, the problem was not solved and the camera control did not work, but after resetting the default settings , everything worked, I note that the ip address was reset to automatic receipt mode.
Automated translation. Excuse me.