ANNKE I61DR 2MP (Hikvision Cube Clone)

Pilot04

Pulling my weight
Joined
Aug 1, 2017
Messages
281
Reaction score
163
Nope, not odd at all. That's what mine did.
Hmm, do I have to reapply the firmware updates again as both of mine show Hikvision instead of Annke?
 

JDWX

Getting the hang of it
Joined
Aug 26, 2014
Messages
138
Reaction score
41
Location
Cleveland, Ohio
Hmm, do I have to reapply the firmware updates again as both of mine show Hikvision instead of Annke?
No, Hikvision is the correct banner. Mine was still showing Annke as I had neglected to clear my cache.
 

Pilot04

Pulling my weight
Joined
Aug 1, 2017
Messages
281
Reaction score
163
No, Hikvision is the correct banner. Mine was still showing Annke as I had neglected to clear my cache.
Cool. Only thing weird so far on both of my cameras is that nothing gets logged in the event logs even though I successfully get email notifications for IVS/MD...
 

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,903
Reaction score
21,275
Cool. Only thing weird so far on both of my cameras is that nothing gets logged in the event logs even though I successfully get email notifications for IVS/MD...
did you insert an sd card?
 

JDWX

Getting the hang of it
Joined
Aug 26, 2014
Messages
138
Reaction score
41
Location
Cleveland, Ohio
Ahh, I can't comment. I just run mine with Blue Iris, so I haven't tried to do any of the functions you've mentioned. .
 

Pilot04

Pulling my weight
Joined
Aug 1, 2017
Messages
281
Reaction score
163
No, I haven't considered inserting an SD card into the cameras. Figured they'd work like the 5231-ZE I just received where at least some entries showed up in the logs.
 

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,903
Reaction score
21,275
No, I haven't considered inserting an SD card into the cameras. Figured they'd work like the 5231-ZE I just received where at least some entries showed up in the logs.
needs a card for the log..
 

Pilot04

Pulling my weight
Joined
Aug 1, 2017
Messages
281
Reaction score
163
Bummer. I didn't plan on installing SD Cards in them so won't be able to check timeline if cameras reboot, etc. May have to reuse SD from my phones when we upgrade them in the future.
 

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,903
Reaction score
21,275
Bummer. I didn't plan on installing SD Cards in them so won't be able to check timeline if cameras reboot, etc. May have to reuse SD from my phones when we upgrade them in the future.
micro sd cards are cheap..5-10 bux...always good to have additional backup recordings..
 

yeme

Young grasshopper
Joined
Apr 21, 2015
Messages
30
Reaction score
12
Anyone have any suggestions for something similiar to this that is outdoor ready? Not interested in any turrets. Or waterproofing these?
I am using this weatherproof enclosure around a pond/waterfall in my outer yard as a wireless creature cam and daylight serenity view:

https://www.amazon.com/gp/product/B00U0S0VM4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

I found when placing this camera (I used the Hikvision brand) flush against a window pane, the IR will reflect, due to the double insulating pane design. It does not, however, reflect with a single pane. The night view is not the best but if a creature comes by close, it works.

If you decide to try it, I recommend using cable ties instead of the supplied plastic cover screws. These screws cracked with me and allowed moisture to creep in.

My setup has been in place over 6 months with no problems.
 
As an Amazon Associate IPCamTalk earns from qualifying purchases.

clix

n3wb
Joined
Sep 17, 2017
Messages
15
Reaction score
0
Has anyone tried swapping in a 2.8mm lens on these? Curious if that's possible and if so how well that works.
 

giomania

IPCT Contributor
Joined
Jun 1, 2017
Messages
780
Reaction score
538
micro sd cards are cheap..5-10 bux...always good to have additional backup recordings..
Any idea what the minimum size is just to get the logs? I have an extra 4 Gb card. There is nothing in the provided Quick Start Guide.

Thanks for any information.
 

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,903
Reaction score
21,275
Any idea what the minimum size is just to get the logs? I have an extra 4 Gb card. There is nothing in the provided Quick Start Guide.

Thanks for any information.
logs take up negligible space, any size will work
 

alastairstevenson

Staff member
Joined
Oct 28, 2014
Messages
15,964
Reaction score
6,794
Location
Scotland

clix

n3wb
Joined
Sep 17, 2017
Messages
15
Reaction score
0
@alastairstevenson have a look on his post the lens stuck out a little bit
I'm not finding the post you're referencing. Is there an easy way to determine which of the lenses on that Treeye store I would need for these Annke cameras? (Sorry, new to this and not sure which specifications determine which lenses can be used as replacements.) Is lens replacement on this camera something that should be fairly straightforward?
 

alastairstevenson

Staff member
Joined
Oct 28, 2014
Messages
15,964
Reaction score
6,794
Location
Scotland
And wow it was sticking out like a darleks eye when I open up the big picture
It sure was!
But, just to be clear, that was an experiment in trying out an f1.2 lens to see how much of an improvement to low-light performance the wider aperture gave.
The cube camera doesn't have the constraint of a window in front of the lens as the other cameras do.
For fun - here is the link to the post : Quality of after-market M12 lenses? Swapping focal lengths...

But the normal f2.0 M12 lenses I've bought from the Treeye store have fitted OK on several DS-2CD2332 cameras I changed from 6mm to 4mm.
 

gadgetry

n3wb
Joined
Dec 1, 2015
Messages
8
Reaction score
3
Does anyone know if the LaView LV-PC902F2-W Panda cam can also be upgraded using the firmware steps outlined by @VorlonFrog? My understanding is it's also a similar Hikvision cube clone. I have a couple I would like to update but don't want to brick them if LaView has specific firmware. Appreciate any advice.
 

beepsilver

Getting comfortable
Joined
Mar 9, 2014
Messages
863
Reaction score
982
Location
Nebraska
Just recvd this cam....I can't seem to determine the default IP, username and password. Doesn't appear to be the same as the Hik cubes. Any help? Thanks.

EDIT: Nevermind, got it connected.
 
Last edited:
Top