Does all functionality work after the update?The C-R-K9B2-00 hardware on the ANNKE NVR matches the firmware referenced in the Hikvision link.
I can't do the update. I get an Upgrade Failed. Device model mismatches. This is what is so frustrating. I buy ten units over the past year and eight are "outdated". The firmware exists. They are just blocking it.Does all functionality work after the update?
sent me a private message with the serial number of the standby model, I will tell you what the latest firmware is and give you a link/I can't do the update. I get an Upgrade Failed. Device model mismatches. This is what is so frustrating. I buy ten units over the past year and eight are "outdated". The firmware exists. They are just blocking it.
WCVUsent me a private message with the serial number of the standby model, I will tell you what the latest firmware is and give you a link/
ps the correct firmware should not look like this NVR_K21B2_BL_ML_STDV4.74.000_230213.zip but something like this NVR_K21B2_BL_MLNEU_V4.74.000_230213.zip
neu firmware is for OEM manufacturers like Annke and others
This is not the full serial number, you need the full one, in private messages, latest firmware for latest revision NVR_N48PAW_C-R-K21B2-00 DZ_K21B2_HILOOK_ML_NEU_V4.75.000_240308N48PAW0820230110CCRRL161xxxxxx
WCVU
latest firmware for NVR_N48PAW_C-R-K9B2-00 V4.71.111 build 231226What I need is the "NEU" firmware for the K9B2 version, not the K21B2. The "STD" version exists on Hikvision's website.
NVR_K9B2_BL_ML_NEU_V4.74.xxxx
NVR_K9B2_BL_ML_NEU_V4.75.xxxx